- 31 7月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
ACPI is wrong. Devices should not release their IRQ's on suspend and re-aquire them on resume. ACPI should just re-init the IRQ controller instead of breaking most drivers very subtly. Breakage reported by Hugh Dickins <hugh@veritas.com> Undo: d8c4b419Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 7月, 2005 1 次提交
-
-
由 Rafael J. Wysocki 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=4416Signed-off-by: NRafael J. Wysocki <rjwysocki@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 28 7月, 2005 1 次提交
-
-
由 Daniel Ritz 提交于
Resume doesn't seem to work without. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 7月, 2005 3 次提交
-
-
由 Dominik Brodowski 提交于
The current CardBus window allocation code in yenta_socket is unable to handle the transparent PCI-bridge handling update in 2.6.13. We need to check _all_ resources of a given type to find the best one suitable for CardBus windows, not just the first one. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
drivers/pci/setup-bus.c enumerates the CardBus windows (bus->resources[]) Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
If the CardBus windows were pre-configured and the CardBus bridge is behind a transparent PCI-PCI bridge, pci_find_parent_resource() might return a different resource than the real parent if it is called before the window is determined. Therefore, move that call around. Also fix return of value in void function. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 7月, 2005 1 次提交
-
-
由 David Shaohua Li 提交于
Drivers should do this: .suspend() pci_disable_device() .resume() pci_enable_device() http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 08 7月, 2005 2 次提交
-
-
由 Russell King 提交于
If probing for the correct interrupt fails on yenta bridges, the driver falls back to polling for interrupt actions. However, CardBus cards cannot be used then. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
As a follow-up, remove the inclusion of pcmcia/version.h in many files. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2005 1 次提交
-
-
由 Ivan Kokshaysky 提交于
On Mon, Jun 20, 2005 at 07:15:34PM +1000, Grant Coady wrote: > Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001] > yenta 0000:00:0b.0: Preassigned resource 0 busy, reconfiguring... In -mm1 the cardbus resources might be assigned in pci_assign_unassigned_resources() pass. From your dmesg: PCI: Bus 2, cardbus bridge: 0000:00:0b.0 IO window: 00002000-00002fff IO window: 00003000-00003fff PREFETCH window: 12000000-13ffffff MEM window: 14000000-15ffffff Then yenta_allocate_res() tries to assign these resources again and, naturally, fails. This adds check for already assigned cardbus resources. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Daniel Ritz 提交于
- make boot-up card recognition more reliable (ie. redo interrogation always if there is no valid 'card inserted' state) (and yes, i saw it happening on an o2micro controller that both CB_CBARD and CB_16BITCARD bits were set at the same time) - also redo interrogation before probing the ISA interrupts. it's safer to do the probing with the socket in a clean state. - make card insert detect more reliable. yenta_get_status() now returns SS_PENDING as long as the card is not completley inserted and one of the voltage bits is set. also !CB_CBARD doesn't mean CB_16BITCARD. there is CB_NOTACARD as well, so make an explicit check for CB_16BITCARD. - for TI bridges: disable IRQs during power-on. in all-serial and tied interrupt mode the interrupts are always disabled for single-slot controllers. for two-slot contollers the disabling is only done when the other slot is empty. to force disabling there is a new module parameter now: pwr_irqs_off=Y (which is a regression for working setups. that's why it's an option, only use when required) - modparm to disable ISA interrupt probing (isa_probe, defaults to on) - remove unneeded code/cleanups (ie. merge yenta_events() into yenta_interrupts()) Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-