This patch migrates the HNS3 driver code from use of depricated PCI
MSI/MSI-X interrupt vector allocation/free APIs to new common APIs.
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function devm_gpiod_get_optional() returns an ERR_PTR on failure. Its
return value should not be validated by a NULL check. Instead, use IS_ERR.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit b94d22d9 "ARM64: dts: meson-gx: add external PHY
interrupt on some platforms" ethernet stopped working on my Odroid-C2
which has a RTL8211F phy.

It turned out that no interrupts were triggered. Further analysis
showed the register INER can't be altered on page 0.
Because register INSR needs to be accessed via page 0xa43 I assumed
that register INER needs to be accessed via some page too.
Some brute force check resulted in page 0xa42 being the right one.

With this patch the phy is working properly in interrupt mode.

Fixes: 3447cf2e ("net/phy: Add support for Realtek RTL8211F")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Tested-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Update firmware version

Ido says:

This set adjusts the driver to use a new firmware version. The new
version includes various enhancements and fixes detailed in the first
patch.

The second patch enables batch deletion of neighbours on a router
interface (RIF) which was not possible with previous versions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 4a3c67a6 ("mlxsw: spectrum_router: Don't batch neighbour
deletion") I removed the support for batch deletion of neighbours on a
router interface (RIF) since at that time the firmware did not support
it for IPv6 neighbours.

This is now supported by the version enforced by the driver, so there is
no reason to delete neighbours one by one anymore.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This new firmware contains:
 - Support Spectrum A1 revision
 - Batch deletion of IPv6 neighbours
 - Remove incorrect VPD capability
Signed-off-by: NShalom Toledo <shalomt@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to
  https://www.mail-archive.com/netdev@vger.kernel.org/msg177411.html
there is a status page available at
  http://vger.kernel.org/~davem/net-next.html
to obtain the current status of the net-next tree.  Let's add this
information to the netdev FAQ.
Signed-off-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* clarify specification references for v0/v1
* add section "APN vs. Network device"
* add section "Local GTP-U entity and tunnel identification"
Signed-off-by: NAndreas Schultz <aschultz@tpip.net>
Signed-off-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rasmus Villemoes says:

====================
net: core: devname allocation cleanups

It's somewhat confusing to have both dev_alloc_name and
dev_get_valid_name. I can't see why the former is less strict than the
latter, so make them (or rather dev_alloc_name_ns and
dev_get_valid_name) equivalent, hardening dev_alloc_name() a little.

Obvious follow-up patches would be to only export one function, and
make dev_alloc_name a static inline wrapper for that (whichever name
is chosen for the exported interface). But maybe there is a good
reason the two exported interfaces do different checking, so I'll
refrain from including the trivial but tree-wide renaming in this
series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If name contains a %, it's easy to see that this patch doesn't change
anything (other than eliminate the duplicate dev_valid_name
call). Otherwise, we'll now just spend a little time in snprintf()
copying name to the stack buffer allocated in dev_alloc_name_ns, and do
the __dev_get_by_name using that buffer rather than name.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we're given format string with no %d, -EEXIST is a saner error code.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently only exclude non-sysfs-friendly names via
dev_get_valid_name; there doesn't seem to be a reason to allow such
names when we're called via dev_alloc_name.

This does duplicate the dev_valid_name check in the dev_get_valid_name()
case; we'll fix that shortly.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only caller passes a stack buffer as buf, so it won't equal the
passed-in name. Moreover, we're already using buf as a scratch buffer
inside the if (p) {} block, so if buf and name were the same, that
snprintf() call would be overwriting its own format string.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_alloc_name contained a BUG_ON(), which I moved to dev_alloc_name_ns;
the only other caller of that already has the same BUG_ON.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No functional change.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__dev_alloc_name is called from the public (and exported)
dev_alloc_name(), so we don't have a guarantee that strlen(name) is at
most IFNAMSIZ. If somebody manages to get __dev_alloc_name called with a
% char beyond the 31st character, we'd be making a snprintf() call that
will very easily crash the kernel (using an appropriate %p extension,
we'll likely dereference some completely bogus pointer).

In the normal case where strlen() is sane, we don't even save anything
by limiting to IFNAMSIZ, so just use strchr().
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ilya Lesokhin says:

====================
tls: Miscellaneous fixes

Here's a set of miscellaneous fix patches.

Patch 1 makes sure aead_request is initailized properly.
Patches 2-3 Fix a memory leak we've encountered.
patch 4 moves tls_make_aad to allow sharing it in the future.
Patch 5 fixes a TOCTOU issue reported here:
https://www.spinics.net/lists/kernel/msg2608603.html
Patch 6 Avoids callback overriding when tls_set_sw_offload fails.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we fail to enable tls in the kernel we shouldn't override
the sk_write_space callback

Fixes: 3c4d7559 ('tls: kernel TLS support')
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid copying crypto_info again after cipher_type check
to avoid a TOCTOU exploits.
The temporary array on the stack is removed as we don't really need it

Fixes: 3c4d7559 ('tls: kernel TLS support')
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

move tls_make_aad as it is going to be reused
by the device offload code and rx path.
Remove unused recv parameter.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously the TLS ulp context would leak if we attached a TLS ulp
to a socket but did not use the TLS_TX setsockopt,
or did use it but it failed.
This patch solves the issue by overriding prot[TLS_BASE_TX].close
and fixing tls_sk_proto_close to work properly
when its called with ctx->tx_conf == TLS_BASE_TX.
This patch also removes ctx->free_resources as we can use ctx->tx_conf
to obtain the relevant information.

Fixes: 3c4d7559 ('tls: kernel TLS support')
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tx configuration is now stored in ctx->tx_conf.
And sk->sk_prot is updated trough a function
This will simplify things when we add rx
and support for different possible
tx and rx cross configurations.
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kzalloc for aead_request allocation as
we don't set all the bits in the request.

Fixes: 3c4d7559 ('tls: kernel TLS support')
Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yonghong Song says:

====================
bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics

This patch set intends to change verifier ARG_CONST_SIZE_OR_ZERO
semantics so that simpler bpf programs can be written with verifier
acceptance. Patch #1 comment provided the detailed examples and
the patch itself implements the new semantics. Patch #2
changes bpf_probe_read helper arg2 type from
ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO. Patch #3 fixed a few
test cases and added some for better coverage.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a few test cases to allow non-NULL map/packet/stack pointer
with size = 0. Change a few tests using bpf_probe_read to use
bpf_probe_write_user so ARG_CONST_SIZE arg can still be properly
tested. One existing test case already covers size = 0 with non-NULL
packet pointer, so add additional tests so all cases of
size = 0 and 0 <= size <= legal_upper_bound with non-NULL
map/packet/stack pointer are covered.
Signed-off-by: NYonghong Song <yhs@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The helper bpf_probe_read arg2 type is changed
from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO to permit
size-0 buffer. Together with newer ARG_CONST_SIZE_OR_ZERO
semantics which allows non-NULL buffer with size 0,
this allows simpler bpf programs with verifier acceptance.
The previous commit which changes ARG_CONST_SIZE_OR_ZERO semantics
has details on examples.
Signed-off-by: NYonghong Song <yhs@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the
access size to be 0 when accessing the previous argument (arg).
Right now, it requires the arg needs to be NULL when size passed
is 0 or could be 0. It also requires a non-NULL arg when the size
is proved to be non-0.

This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior
such that for size-0 or possible size-0, it is not required
the arg equal to NULL.

There are a couple of reasons for this semantics change, and
all of them intends to simplify user bpf programs which
may improve user experience and/or increase chances of
verifier acceptance. Together with the next patch which
changes bpf_probe_read arg2 type from ARG_CONST_SIZE to
ARG_CONST_SIZE_OR_ZERO, the following two examples, which
fail the verifier currently, are able to get verifier acceptance.

Example 1:
   unsigned long len = pend - pstart;
   len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len;
   len &= MAX_PAYLOAD_LEN;
   bpf_probe_read(data->payload, len, pstart);

It does not have test for "len > 0" and it failed the verifier.
Users may not be aware that they have to add this test.
Converting the bpf_probe_read helper to have
ARG_CONST_SIZE_OR_ZERO helps the above code get
verifier acceptance.

Example 2:
  Here is one example where llvm "messed up" the code and
  the verifier fails.

......
   unsigned long len = pend - pstart;
   if (len > 0 && len <= MAX_PAYLOAD_LEN)
     bpf_probe_read(data->payload, len, pstart);
......

The compiler generates the following code and verifier fails:
......
39: (79) r2 = *(u64 *)(r10 -16)
40: (1f) r2 -= r8
41: (bf) r1 = r2
42: (07) r1 += -1
43: (25) if r1 > 0xffe goto pc+3
  R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff))
  R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0)
  R8=inv(id=0) R9=inv0 R10=fp0
44: (bf) r1 = r6
45: (bf) r3 = r8
46: (85) call bpf_probe_read#45
R2 min value is negative, either use unsigned or 'var &= const'
......

The compiler optimization is correct. If r1 = 0,
r1 - 1 = 0xffffffffffffffff > 0xffe.  If r1 != 0, r1 - 1 will not wrap.
r1 > 0xffe at insn #43 can actually capture
both "r1 > 0" and "len <= MAX_PAYLOAD_LEN".
This however causes an issue in verifier as the value range of arg2
"r2" does not properly get refined and lead to verification failure.

Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO
allows the following simplied code:
   unsigned long len = pend - pstart;
   if (len <= MAX_PAYLOAD_LEN)
     bpf_probe_read(data->payload, len, pstart);

The llvm compiler will generate less complex code and the
verifier is able to verify that the program is okay.
Signed-off-by: NYonghong Song <yhs@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I had many reports that TSQ logic breaks wifi aggregation.

Current logic is to allow up to 1 ms of bytes to be queued into qdisc
and drivers queues.

But Wifi aggregation needs a bigger budget to allow bigger rates to
be discovered by various TCP Congestion Controls algorithms.

This patch adds an extra socket field, allowing wifi drivers to select
another log scale to derive TCP Small Queue credit from current pacing
rate.

Initial value is 10, meaning that this patch does not change current
behavior.

We expect wifi drivers to set this field to smaller values (tests have
been done with values from 6 to 9)

They would have to use following template :

if (skb->sk && skb->sk->sk_pacing_shift != MY_PACING_SHIFT)
     skb->sk->sk_pacing_shift = MY_PACING_SHIFT;

Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670041Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Kir Kolyshkin <kir@openvz.org>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Fixes

Here are some patches that fix some things in AF_RXRPC:

 (1) Prevent notifications from being passed to a kernel service for a call
     that it has ended.

 (2) Fix a null pointer deference that occurs under some circumstances when an
     ACK is generated.

 (3) Fix a number of things to do with call expiration.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When "NETDEV WATCHDOG: em4 (bnx2x): transmit queue 2 timed out" occurs,
BNX2X_SP_RTNL_TX_TIMEOUT is set. In the function bnx2x_sp_rtnl_task,
bnx2x_nic_unload and bnx2x_nic_load are executed to shutdown and open
NIC. In the function bnx2x_nic_load, bnx2x_alloc_mem allocates dma
failure. The message "bnx2x: [bnx2x_alloc_mem:8399(em4)]Can't
allocate memory" pops out. The variable slowpath is set to NULL.
When shutdown the NIC, the function bnx2x_nic_unload is called. In
the function bnx2x_nic_unload, the following functions are executed.
bnx2x_chip_cleanup
    bnx2x_set_storm_rx_mode
        bnx2x_set_q_rx_mode
            bnx2x_set_q_rx_mode
                bnx2x_config_rx_mode
                    bnx2x_set_rx_mode_e2
In the function bnx2x_set_rx_mode_e2, the variable slowpath is operated.
Then the crash occurs.
To fix this crash, the variable slowpath is checked. And in the function
bnx2x_sp_rtnl_task, after dma memory allocation fails, another shutdown
and open NIC is executed.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: NAriel Elior <aelior@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: collect LE-TCAM and SGE queue contexts

Collect hardware dumps via ethtool --get-dump facility.

Patch 1 collects LE-TCAM dump.

Patch 2 collects SGE queue context dumps.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Collect SGE freelist queue and congestion manager contexts.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f1fb08f6 ("vxlan: fix ND proxy when skb doesn't have transport
header offset") removed icmp6_code and icmp6_type check before calling
neigh_reduce when doing neigh proxy.

It means all icmpv6 packets would be blocked by this, not only ns packet.
In Jianlin's env, even ping6 couldn't work through it.

This patch is to bring the icmp6_code and icmp6_type check back and also
removed the same check from neigh_reduce().

Fixes: f1fb08f6 ("vxlan: fix ND proxy when skb doesn't have transport header offset")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NVincent Bernat <vincent@bernat.im>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that spi_byaddr and spi_byspi arrays initialized in net_init hook
were return to initial state
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that lists initialized in net_init hook were return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that pndevs.list initialized in net_init hook was return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that l2tp_session_hlist array initialized in net_init hook
was return to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that rules_ops list initialized in net_init hook was return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be sure that fib_notifier_ops list initilized in net_init hook was return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>