BAD_MADT_ENTRY() is arch independent and will be used for all
architectures which parse MADT, so move it to linux/acpi.h to
reduce code duplication.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This change adds a runtime option that will force ACPICA to use the
RSDT instead of the XSDT. Although the ACPI spec requires that an XSDT
be used instead of the RSDT, the XSDT has been found to be corrupt or
ill-formed on some machines.

This option is already in the Linux kernel.  When it is back ported to
ACPICA, code is re-written to follow ACPICA coding style.  This patch
is the generation of the integration.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

__initdata tag should not be placed between "struct" and "resource"
because it prevents the variable from being placed in the intended
.init.data section. Fix it.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In acpi_register_lapic(), it will generates a new logical cpu
number and maps to the local APIC id, this logical cpu number
can be returned to simplify _acpi_map_lsapic() implementation.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since APIC id is saved in processor struct, just use it and
remove the duplicated _MAT evaluation.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When programming ioapic pinX more than once, current code
does not check whether the later attr (trigger & polarity) is the
same as the former or not.

This causes broken semantics which can be observed in a qemu q35
machine, where ioapic's ioredtbl[x] can never be set as low-active,
even if the hpet driver registered it.

And hpet driver may share a high-level active IRQ line with other
devices. So in qemu, when hpet-dev asserts low-level as kernel
expects, the kernel has no response.

With this patch, we can observe an ioredtbl[x] set as low-active
for hpet.

Fix it by reporting -EBUSY to the caller, when attr is different.
Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1377248327-19633-1-git-send-email-pingfank@linux.vnet.ibm.com
[ Made small readability edits to both the changelog and the code. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The implementation of function __acpi_map_table() has been
changed long time ago, and now it directly invokes
early_ioremap() to setup the temporarily acpi table mappings.

So correct its out-of-date comment.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: len.brown@intel.com
Cc: pavel@ucw.cz
Cc: rjw@sisk.pl
Link: http://lkml.kernel.org/r/51EE7F1C.9020506@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We wanted to check if the APIC ID is out of range. It should be:

	if (id >= MAX_LOCAL_APIC)

There's no known bad effect of this bug.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Cc: pavel@ucw.cz
Cc: rjw@sisk.pl
Link: http://lkml.kernel.org/r/1374566419-21120-1-git-send-email-tangchen@cn.fujitsu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Add a boot option to disable firmware first mode for corrected errors.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Which by default will be x86_acpi_suspend_lowlevel.
This registration allows us to register another callback
if there is a need to use another platform specific callback.
Signed-off-by: NLiang Tang <liang.tang@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NBen Guthro <benjamin.guthro@citrix.com>
Acked-by: N"H. Peter Anvin" <hpa@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When a cpu is hotpluged, we call acpi_map_cpu2node() in
_acpi_map_lsapic() to store the cpu's node and apicid's node.  But we
don't clear the cpu's node in acpi_unmap_lsapic() when this cpu is
hotremoved.  If the node is also hotremoved, we will get the following
messages:

  kernel BUG at include/linux/gfp.h:329!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel microcode pcspkr i2c_i801 i2c_core lpc_ich mfd_core ioatdma e1000e i7core_edac edac_core sg acpi_memhotplug igb dca sd_mod crc_t10dif megaraid_sas mptsas mptscsih mptbase scsi_transport_sas scsi_mod
  Pid: 3126, comm: init Not tainted 3.6.0-rc3-tangchen-hostbridge+ #13 FUJITSU-SV PRIMEQUEST 1800E/SB
  RIP: 0010:[<ffffffff811bc3fd>]  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
  RSP: 0018:ffff88078a049cf8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000246
  RBP: ffff88078a049d38 R08: 00000000000040d0 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000b5f R12: 00000000000052d0
  R13: ffff8807c1417300 R14: 0000000000030038 R15: 0000000000000003
  FS:  00007fa9b1b44700(0000) GS:ffff8807c3800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fa9b09acca0 CR3: 000000078b855000 CR4: 00000000000007e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process init (pid: 3126, threadinfo ffff88078a048000, task ffff8807bb6f2650)
  Call Trace:
    new_slab+0x30/0x1b0
    __slab_alloc+0x358/0x4c0
    kmem_cache_alloc_node_trace+0xb4/0x1e0
    alloc_fair_sched_group+0xd0/0x1b0
    sched_create_group+0x3e/0x110
    sched_autogroup_create_attach+0x4d/0x180
    sys_setsid+0xd4/0xf0
    system_call_fastpath+0x16/0x1b
  Code: 89 c4 e9 73 fe ff ff 31 c0 89 de 48 c7 c7 45 de 9e 81 44 89 45 c8 e8 22 05 4b 00 85 db 44 8b 45 c8 0f 89 4f ff ff ff 0f 0b eb fe <0f> 0b 90 eb fd 0f 0b eb fe 89 de 48 c7 c7 45 de 9e 81 31 c0 44
  RIP  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
   RSP <ffff88078a049cf8>
  ---[ end trace adf84c90f3fea3e5 ]---

The reason is that the cpu's node is not NUMA_NO_NODE, we will call
alloc_pages_exact_node() to alloc memory on the node, but the node is
offlined.

If the node is onlined, we still need cpu's node.  For example: a task
on the cpu is sleeped when the cpu is hotremoved.  We will choose
another cpu to run this task when it is waked up.  If we know the cpu's
node, we will choose the cpu on the same node first.  So we should clear
cpu-to-node mapping when the node is offlined.

This patch only clears apicid-to-node mapping when the cpu is
hotremoved.

[akpm@linux-foundation.org: fix section error]
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-44-git-send-email-yinghai@kernel.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

These functions might be called from modules as well so make sure
they are exported.

In addition, implement empty version of acpi_unregister_gsi() and
remove the one from pci_irq.c.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is needed for ACPI table overriding via initrd. Beside reserving
memblocks, X86 also requires to flag the memory area to E820_RESERVED or
E820_ACPI in the e820 mappings to be able to io(re)map it later.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Link: http://lkml.kernel.org/r/1349043837-22659-3-git-send-email-trenn@suse.de
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Commit 31d2092e ("x86: move
mp_register_lapic_address to boot.c") renamed mp_register_lapic
to acpi_register_lapic. But mp_register_lapic remains in a
comment. So the patch rename it.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/50625239.3050403@jp.fujitsu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is the 2nd part of fix for kernel bugzilla 40002:
    "IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

The root cause is the buggy FW, whose ACPI tables assign the GSI 16
to 2 irqs 0 and 16(VGA), and the VGA is the right owner of GSI 16.
So add a quirk to ignore the irq0 overriding GSI 16 for the
FUJITSU SIEMENS AMILO PRO V2030 platform will solve this issue.
Reported-and-tested-by: NSzymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Current WARN msg is only for the ati_ixp4x0 board, while this function
is used by mulitple platforms. So this one board specific warning
is not appropriate any more.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Currently when acpi_skip_timer_override is set, it only cover the
(source_irq == 0 && global_irq == 2) cases. While there is also
platform which need use this option and its global_irq is not 2.
This patch will extend acpi_skip_timer_override to cover all
timer overriding cases as long as the source irq is 0.

This is the first part of a fix to kernel bug bugzilla 40002:
	"IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002Reported-and-tested-by: NSzymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory.  A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.

This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture.  There is no point in
carrying this any further into the future.

One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Commit 943bc7e1 ("x86: Fix section warnings") added
__cpuinitdata here, while for functions __cpuinit should be
used.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: <sp@numascale.com>
Link: http://lkml.kernel.org/r/4FA947910200007800082470@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Steffen Persvold <sp@numascale.com>

When processor is being hot-added to the system, acpi_map_lsapic invokes
ACPI _MAT method to find APIC ID and flags, verifies that returned structure
is indeed ACPI's local APIC structure, and that flags contain MADT_ENABLED
bit.  Then saves APIC ID, frees structure - and accesses structure when
computing arguments for acpi_register_lapic call.  Which sometime leads
to acpi_register_lapic call being made with second argument zero, failing
to bring processor online with error 'Unable to map lapic to logical cpu
number'.

As lapic->lapic_flags & ACPI_MADT_ENABLED was already confirmed to be non-zero
few lines above, we can just pass unconditional ACPI_MADT_ENABLED to the
acpi_register_lapic.
Signed-off-by: NPetr Vandrovec <petr@vmware.com>
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

As suggested by Suresh Siddha and Yinghai Lu:

For x2apic pre-enabled systems, apic driver is set already early
through early_acpi_boot_init()/early_acpi_process_madt()/
acpi_parse_madt()/default_acpi_madt_oem_check() path so that
apic_id_valid() checking will be sufficient during MADT and SRAT
parsing.

For non-x2apic pre-enabled systems, all apic ids should be less
than 255.

This allows us to substitute the checks in
arch/x86/kernel/acpi/boot.c::acpi_parse_x2apic() and
arch/x86/mm/srat.c::acpi_numa_x2apic_affinity_init() with
apic->apic_id_valid().

In addition we can avoid feigning the x2apic cpu feature in the
NumaChip apic code.

The following apic drivers have separate apic_id_valid()
functions which will accept x2apic type IDs :

 x2apic_phys
 x2apic_cluster
 x2apic_uv_x
 apic_numachip
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1331925935-13372-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix the following section warnings :

WARNING: vmlinux.o(.text+0x49dbc): Section mismatch in reference
from the function acpi_map_cpu2node() to the variable
.cpuinit.data:__apicid_to_node The function acpi_map_cpu2node()
references the variable __cpuinitdata __apicid_to_node. This is
often because acpi_map_cpu2node lacks a __cpuinitdata
annotation or the annotation of __apicid_to_node is wrong.

WARNING: vmlinux.o(.text+0x49dc1): Section mismatch in reference
from the function acpi_map_cpu2node() to the function
.cpuinit.text:numa_set_node() The function acpi_map_cpu2node()
references the function __cpuinit numa_set_node(). This is often
because acpi_map_cpu2node lacks a __cpuinit  annotation or the
annotation of numa_set_node is wrong.

WARNING: vmlinux.o(.text+0x526e77): Section mismatch in
reference from the function prealloc_protection_domains() to the
function .init.text:alloc_passthrough_domain() The function
prealloc_protection_domains() references the function __init
alloc_passthrough_domain(). This is often because
prealloc_protection_domains lacks a __init  annotation or the annotation of alloc_passthrough_domain is wrong.
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1331810188-24785-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If the x2apic feature is not present (either the cpu is not capable of it
or the user has disabled the feature using boot-parameter etc), ignore the
x2apic MADT and SRAT entries provided by the ACPI tables.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.540896503@sbsiddha-desk.sc.intel.comSigned-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

On some SB800 systems polarity for IOAPIC pin2 is wrongly
specified as low active by BIOS. This caused system hangs after
resume from S3 when HPET was used in one-shot mode on such
systems because a timer interrupt was missed (HPET signal is
high active).

For more details see:

  http://marc.info/?l=linux-kernel&m=129623757413868Tested-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: stable@kernel.org # 37.x, 32.x
LKML-Reference: <20110224145346.GD3658@alberich.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unlike 64bit, 32bit has been using its own cpu_to_node_map[] for
CPU -> NUMA node mapping.  Replace it with early_percpu variable
x86_cpu_to_node_map and share the mapping code with 64bit.

* USE_PERCPU_NUMA_NODE_ID is now enabled for 32bit too.

* x86_cpu_to_node_map and numa_set/clear_node() are moved from
  numa_64 to numa.  For now, on 32bit, x86_cpu_to_node_map is initialized
  with 0 instead of NUMA_NO_NODE.  This is to avoid introducing unexpected
  behavior change and will be updated once init path is unified.

* srat_detect_node() is now enabled for x86_32 too.  It calls
  numa_set_node() and initializes the mapping making explicit
  cpu_to_node_map[] updates from map/unmap_cpu_to_node() unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-15-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node().  On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.

srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology.  Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change.  The comment is reformatted and
updated to note the ugliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

Generic Hardware Error Source provides a way to report platform
hardware errors (such as that from chipset). It works in so called
"Firmware First" mode, that is, hardware errors are reported to
firmware firstly, then reported to Linux by firmware. This way, some
non-standard hardware error registers or non-standard hardware link
can be checked by firmware to produce more valuable hardware error
information for Linux.

This patch adds POLL/IRQ/NMI notification types support.

Because the memory area used to transfer hardware error information
from BIOS to Linux can be determined only in NMI, IRQ or timer
handler, but general ioremap can not be used in atomic context, so a
special version of atomic ioremap is implemented for that.

Known issue:

- Error information can not be printed for recoverable errors notified
  via NMI, because printk is not NMI-safe. Will fix this via delay
  printing to IRQ context via irq_work or make printk NMI-safe.

v2:

- adjust printk format per comments.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

	text		data		bss		dec		filename
	21696943	4193748		12787712	38678403	vmlinux.before
	21696943	4193748		12791808	38682499	vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.

If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].

for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...

[    9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[    9.235021] divide error: 0000 [#1] SMP
[    9.235315] last sysfs file:
[    9.235481] CPU 1
[    9.235592] Modules linked in:
[    9.245398]
[    9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274      /Sun Fire x4800
[    9.265415] RIP: 0010:[<ffffffff81075a8f>]  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
...
[    9.645938] RIP  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[    9.665356]  RSP <ffff88103f8d1c40>
[    9.665568] ---[ end trace 2296156d35fdfc87 ]---

So let just parse all cpu entries in SRAT.

Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].

it fixes following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662

-v2: expand to 32bit according to hpa
   need to add MAX_LOCAL_APIC for 32bit
Reported-and-Tested-by: NWu Fengguang <fengguang.wu@intel.com>
Reported-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: NMyron Stowe <myron.stowe@hp.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD486.9020704@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.

Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

They are the same, move the common function to apic.c to allow
further cleanups.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF675.4060305@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>

Rather than using a tree of conditionals, use function pointer
for acpi_register_gsi.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>

When I introduced the global variable gsi_end I thought gsi_end on
io_apics was one past the end of the gsi range for the io_apic.  After
it was pointed out the the range on io_apics was inclusive I changed
my global variable to match.  That was a big mistake.  Inclusive
semantics without a range start cannot describe the case when no gsi's
are allocated.  Describing the case where no gsi's are allocated is
important in sfi.c and mpparse.c so that we can assign gsi numbers
instead of blindly copying the gsi assignments the BIOS has done as we
do in the acpi case.

To keep from getting the global variable confused with the gsi range
end rename it gsi_top.

To allow describing the case where no gsi's are allocated have gsi_top
be one place the highest gsi number seen in the system.

This fixes an off by one bug in sfi.c:
Reported-by: Njacob pan <jacob.jun.pan@linux.intel.com>

This fixes the same off by one bug in mpparse.c:

This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi
Reported-by: NYinghai <yinghai.lu@oracle.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m17hm9jre7.fsf_-_@fess.ebiederm.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Now that the generic irq layer is performing the exact same remapping as
io_apic_renumber_irq we can kill this weird  es7000 specific function.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-15-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

ACPI irq source overrides are allowed for the 16 isa irqs and are
allowed to map any gsi to any isa irq.  A few motherboards have been
seen to take advantage of this and put the isa irqs on the 2nd or
3rd ioapic.  This causes some problems, most notably the fact
that we can not use any gsi < 16.

To correct this move the gsis that are not isa irqs and have
a gsi number < 16 into the linux irq space just past gsi_end.
This is what the es7000 platform is doing today.  Moving only the
low 16 gsis above the rest of the gsi's only penalizes weird
platforms, leaving sane acpi implementations with a 1-1 mapping
of gsis and irqs.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-14-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>