- 24 6月, 2008 14 次提交
-
-
由 Miklos Szeredi 提交于
Rename nfsd_permission() specific MAY_* flags to NFSD_MAY_* to make it clear, that these are not used outside nfsd, and to avoid name and number space conflicts with the VFS. [comment from hch: rename MAY_READ, MAY_WRITE and MAY_EXEC as well] Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 NeilBrown 提交于
OCFS2 can return -ERESTARTSYS from write requests (and possibly elsewhere) if there is a signal pending. If nfsd is shutdown (by sending a signal to each thread) while there is still an IO load from the client, each thread could handle one last request with a signal pending. This can result in -ERESTARTSYS which is not understood by nfserrno() and so is reflected back to the client as nfserr_io aka -EIO. This is wrong. Instead, interpret ERESTARTSYS to mean "try again later" by returning nfserr_jukebox. The client will resend and - if the server is restarted - the write will (hopefully) be successful and everyone will be happy. The symptom that I narrowed down to this was: copy a large file via NFS to an OCFS2 filesystem, and restart the nfs server during the copy. The 'cp' might get an -EIO, and the file will be corrupted - presumably holes in the middle where writes appeared to fail. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Neil Brown 提交于
We need the nfsd_mutex before accessing nfsd_serv->sv_nrthreads or we can't even guarantee nfsd_serv will still be there. Signed-off-by: NNeil Brown <neilb@suse.de> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
If lockd_down is called very rapidly after lockd_up returns, then there is a slim chance that lockd() will never be called. kthread() will return before calling the function, so we'll end up never actually calling the cleanup functions for the thread. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
Since we no longer make any distinction between shutdown signals with nfsd, then it becomes easier to just standardize on a particular signal to use to bring it down (SIGINT, in this case). Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
This patch is rather large, but I couldn't figure out a way to break it up that would remain bisectable. It does several things: - change svc_thread_fn typedef to better match what kthread_create expects - change svc_pool_map_set_cpumask to be more kthread friendly. Make it take a task arg and and get rid of the "oldmask" - have svc_set_num_threads call kthread_create directly - eliminate __svc_create_thread Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
The special handling for SIGHUP in knfsd is a holdover from much earlier versions of Linux where reloading the export table was more expensive. That facility is not really needed anymore and to my knowledge, is seldom-used. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Jeff Layton 提交于
Several of the nfsd filesystem interfaces allow changes to parameters that don't have any effect on a running nfsd service. They are only ever checked when nfsd is started. This patch fixes it so that changes to those procfiles return -EBUSY if nfsd is already running to make it clear that changes on the fly don't work. The patch should also close some relatively harmless races between changing the info in those interfaces and starting nfsd, since these variables are being moved under the protection of the nfsd_mutex. Finally, the nfsv4recoverydir file always returns -EINVAL if read. This patch fixes it to return the recoverydir path as expected. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Neil Brown 提交于
This removes the BKL from the RPC service creation codepath. The BKL really isn't adequate for this job since some of this info needs protection across sleeps. Also, add some comments to try and clarify how the locking should work and to make it clear that the BKL isn't necessary as long as there is adequate locking between tasks when touching the svc_serv fields. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Benny Halevy 提交于
The cb_stat member of struct nfs4_callback is unused since commit ff7d9756 nfsd: use static memory for callback program and stats Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Benny Halevy 提交于
The cb_program member of struct nfs4_callback unused since commit ff7d9756 nfsd: use static memory for callback program and stats Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
These flag bits aren't used by either the protocol or our implementation, so I don't know why they were here. Thanks to Johann Dahm for running across these. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Cc: Johann Dahm <jdahm@umich.edu>
-
由 Benny Halevy 提交于
WRITEMEM zeroes the last word in the destination buffer for padding purposes, but this must not be done if no bytes are to be copied, as it would result in zeroing of the word right before the array. The current implementation works since it's always called with non zero nbytes or it follows an encoding of the string (or opaque) length which, if equal to zero, can be overwritten with zero. Nevertheless, it seems safer to check for this case. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
We already print each operation of the compound when debugging is turned on; printing the result could also help with remote debugging. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 19 5月, 2008 26 次提交
-
-
由 J. Bruce Fields 提交于
These bit operations don't need to be atomic. They're all done under a single big mutex anyway. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 Linus Torvalds 提交于
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/max6875: Really prevent 24RF08 corruption i2c-amd756: Fix functionality flags i2c: Kill the old driver matching scheme i2c: Convert remaining new-style drivers to use module aliasing i2c: Switch pasemi to the new device/driver matching scheme i2c: Clean up Blackfin BF527 I2C device declarations i2c-nforce2: Disable the second SMBus channel on the DFI Lanparty NF4 Expert i2c: New co-maintainer
-
由 Geert Uytterhoeven 提交于
Add multi_defconfig, to build a kernel for all supported m68k platforms, excluding Sun 3 (Sun 3 kernels are incompatible with all other m68k platforms) Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Update the m68k defconfigs Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k: Correctly handle multi-ISA at runtime in multi-platform kernels Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The *_ISA type defines are quite generic and cause namespace conflicts (e.g. with `AMIGAHW_DECLARE(GG2_ISA)' in <asm/amigahw.h>) for some kernel configurations. Use ISA_TYPE_* to avoid such conflicts. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
UIO needs m68k_mmutype: ERROR: "m68k_mmutype" [drivers/uio/uio.ko] undefined! (noticed by Christian T. Steigies) Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Mark Q40/Q60 floppy support broken: arch/m68k/q40/q40ints.c: In function 'q40_irq_handler': arch/m68k/q40/q40ints.c:214: error: implicit declaration of function 'floppy_hardint' Including <asm/floppy.h> doesn't help, as it causes a lot of additional error messages (cfr. Sun 3x). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Some input drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Apollo frame buffer device driver (dnfb) doesn't check whether it's actually running on Apollo hardware, causing a crash if it isn't. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Macintosh IDE driver (macide) doesn't check whether it's actually running on Mac hardware, causing a crash if it isn't. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
When running a HP300-enabled kernel on non-HP300 hardware, a test in the early startup code jumps to the wrong label, causing a double bus fault. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Use `__builtin_trap()' instead of `asm volatile("illegal")' in the m68k BUG() macros (as suggested by Andrew Pinski), to kill warnings in code that assumes BUG() does not return. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k vme_scc: - make scc_ports[] static - kill unused global scc_initialized Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Hisoft Whippet PCMCIA serial driver has been removed a long time ago, but it's Kconfig symbol still existed. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Correct FB_HP300 dependencies: - FB_HP300 doesn't depend only on HP300, but also on DIO (which depends on HP300) - FB_HP300 does not need FB_CFB_FILLRECT Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
CONFIG_FB_DAFB is a leftover from pre-Kconfig Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Convert access_ok() from a macro to an inline function, so the compiler no longer complains about unused variables: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:556: warning: unused variable 'buf' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
i2c-core takes care of the possible corruption of 24RF08 chips for quite some times, so device devices no longer need to do it. And they really should not, as applying the prevention twice voids it. I thought that I had fixed all drivers long ago but apparently I had missed that one. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com>
-
由 Jean Delvare 提交于
The i2c-amd756 driver pretends to support SMBus process call transactions but actually does not. Fix it. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Remove the old driver_name/type scheme for i2c driver matching. Only the standard aliasing model will be used from now on. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Update all the remaining new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. Note that the tuner driver is a bit quirky at the moment, as it overwrites i2c_client.name with arbitrary strings. We write "tuner" back on remove, to make sure that driver cycling will work properly, but there may still be troublesome corner cases. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The old device/driver matching scheme is going away so stop using it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NOlof Johansson <olof@lixom.net>
-