This patch adds TopBottom detection for most Macronix chips with CFI V1.0.

The main purpose of this patch is to add detection of the MX29LV400C B
used on the LaCie Ethernet Disk mini V2 NAS.

It detects the following parts correctly:-
MX28F640C3B T
MX29LV002C  B
MX29LV002NC B
MX29LV004C  T
MX29LV400C  T/B
MX29LV800C  T/B
MX29LV160C  T/B
MX29SL800C  T/B
MX29SL802C  T/B

It detects the following uniform part as bottom but it should work
correctly:-
MX29LV040C

For T parts it causes the erase block table to be reversed correctly.
For other parts it avoids the bogus "Assuming top" message.

It does not detect the following correctly:-
MX28F640C3B B
MX29LV002C  T
MX29LV002NC T
MX29LV004C  B
MX29SL400C  T/B
MX29SL402C  T/B

If desired I could supply a more complicated patch to handle these as
well.

Only the MX29LV400C B has been physically tested; others were checked
against their data sheets.
Signed-off-by: NChristopher Moore <moore@free.fr>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Below patch fixes the following compilation warnings.
drivers/mtd/nand/cs553x_nand.c:293: warning: unused variable 'mtd_parts'
drivers/mtd/nand/cs553x_nand.c:292: warning: unused variable 'mtd_parts_nb'
Signed-off-by: NManish Katiyar <mkatiyar@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

After choosing new c->nextblock, don't leave the wbuf offset field
occasionally pointing at the start of the next physical eraseblock.
This was causing a BUG() on NOR-ECC (Sibley) flash, where we start
writing after the cleanmarker.

Among other this fix should cover write buffer offset adjustment
after flushing the last page of an eraseblock.
Signed-off-by: NAlexander Belyakov <abelyako@googlemail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This makes the driver erase a block when it doesn't find any
existing saved log messages which is safer than assuming the
flash was already erased.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add a magic number to logged kernel oops messages so that they
can be more accurately detected rather than just having to rely
on the sequence number. This also allows easier detection of
saved crashes by userspace.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fix an off by one error in the mtdoops driver
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Make the parameter names of jffs2_compress() in its comments match with the
actual implementation
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Several Renesas SuperH CPU has FLCTL. The FLCTL support NAND Flash.
This driver support SH7723.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The functions that write the OOB info (on hardware ECC only) use the 
HW_SYNDROME method.

This is not correct : the start position is "pos = eccsize + chunk" and 
should be eccsize. So, the standard (nand_write_oob_std) function should 
be used. This patch corrects this by using NAND_ECC_HW instead of 
NAND_ECC_HW_SYNDROME.

This has only been tested on small pages nand flash.
(if anyone can test it on large pages that would be great).

kernel version : 2.6.27-rc2 (current git mtd-2.6)
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Include missing parts of previous patch.
Signed-off-by: NChen Gong <g.chen@freescale.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Removed the Kconfig associated with 'NDFC NanD Flash Controller'.
We can't enable !CONFIG_PPC_MERGE so there is no way to enable
this.  Additionally the code needs to get updated for arch/powerpc.

For the time being lets just remove the Kconfig option so we can
actually remove CONFIG_PPC_MERGE.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch extends the FSL UPM NAND driver from Anton Vorontsov to
support hardware which does not have the R/B pin of the NAND chip
connected, like the TQM8548 module:

- The OF_GPIO dependency has been removed from the Kconfig option
  because GPIO is not needed. The relevant gpio_* function are then
  stubbed out in <linux/gpio.h>.

- It re-introduces the chip-delay property to define an appropriate
  maximum delay time (tR) required for read operations. The binding
  will be documented in a separate patch.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

- Get rid of fsl,wait-pattern and fsl,wait-write. I think this isn't
  chip-specific, and we should always do waits. I saw one board that
  didn't need fsl,wait-pattern, but I assume this was the exception
  that proves the rule;
- Get rid of chip-delay. Today there are no users for this, and if
  anyone really need this they should push the OF bindings beforehand;
- Now flash chips should be child nodes of the FSL UPM NAND controller;
- Implement OF partition parsing.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch makes debugging a missconfigured UBI a bit easier
by providing the needed information in the boot log.
Signed-off-by: NDeepak Saxena <dsaxena@laptop.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

When iterating over a chain in reverse (oldest block first), this
patch correctly marks the PUtable[] entry of the second to last erase
block of a chain as BLOCK_NIL, regardless of whether or not it can
format the last block successfully. Before, the second to last block
was only marked as pointing to BLOCK_NIL if INFTL_formatblock()
succeeded on the last block of the chain, which could potentially
result in an infinite loop if the block was worn out and refused to
format.
Signed-off-by: NDaniel Rosenthal <danielrosenthal@acm.org>
Acked-by: NGreg Ungerer <gerg@snapgear.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

...since it only probes that
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now that the needed helpers are exported, it becomes a nice simple 
switch over. Closes #9420
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

.... so that they can be used by MTD map drivers. Lets us close #9420
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The patch fixes CFI issue with multipartitional devices leading to the 
set of errors or even deadlock. The problem is CFI FL_SYNCING state race 
with flash operations (e.g. erase suspend). It is reproduced by running 
intensive writes on one JFFS2 partition and simultaneously performing 
mount/unmount cycle on another partition of the same chip.
Signed-off-by: NAlexander Belyakov <abelyako@googlemail.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In case of error, the function add_volume returns an ERR pointer. The
result of IS_ERR, which is supposed to be used in a test as it is, is
here checked to be less than zero, which seems odd. We suggest to
replace this test by a simple IS_ERR test.

A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@def0@
expression x;
position p0;
@@
x@p0 = add_volume(...)

@protected@
expression def0.x,E;
position def0.p0;
position p;
statement S;
@@
x@p0
... when != x = E
if (!IS_ERR(x) && ...) {<... x@p ...>} else S

@unprotected@
expression def0.x,E;
identifier fld;
position def0.p0;
position p != protected.p;
@@
x@p0
... when != x = E
* x@p->fld
// </smpl>
Signed-off-by: NJulien Brunel <brunel@diku.dk>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
The first command sent is NAND_CMD_READID.
Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
Tested with an MT29F4G08AAC.
Signed-off-by: NKarl Beldan <karl.beldan@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Very occasionally, (about one in a million) read operations are
ongoing after the timeout has expired.  So, retry three times
while the ongoing bit remains set.
Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We do not need BKL in UBI because we serialize things
properly.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>

This patch adds support for the integrated NAND flash controller of the
i.MX2 and i.MX3 family. It is tested on MX27 but should work on MX3
aswell.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Minor patch to help debugging of NAND detection.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch moves some attributes out from the platform data into the
dynamically created nand device.   This results into a cleaner interface
and allows to use constant pxa3xx_nand_flash definitions.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch marks some attributes as 'const' which are set only once and
never be modified by the driver.  There are some changes in parameter
list and variable declarations too which mark them as 'const'.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds a MTD_NAND_PXA3xx_BUILTIN configuration variables which
allows to disable usage of builtin flash-type table.  Not enabling this
option saves some space in the generated driver.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds 'flash' and 'num_flash' attributes to the platform data.
There was added code in the driver to iterate across these attributes in the
detect-flash routine.  This is done similarly to the existing method
which uses a 'builtin_flash_types' field.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch moves the exported datastructures from the pxa3xx_nand.c driver
into the <mach/pxa3xx_nand.h> header. This is a plain movement without
any modification of the attributes.

This is the first one of a set of patches which:

 * allows to specify used NAND flash in the platform code and allows to turn
   off the old way to specify NAND characteristics in the driver.  This way did
   not worked well as these characteristics depend on the platform and can not be
   derived from NAND id alone.

   E.g.  some NAND chips share the same ID (e.g.  K9K8G08U0A and K9NBG08U5A) but
   have different timings (which are written in the common driver currently and
   must be modified there).

 * adds 'const' annotations at various places

Further patches will be sent to the mtd-list.
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

It requires cfi_qry_mode_on(), which is in cfi_util.c

Reported by Russell King
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSemun Lee <semun.lee@samsung.com>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Not used anywhere yet, but this complements the existing plain
'insert_resource()' functionality with a version that can expand the
resource we are adding in order to fix up any conflicts it has with
existing resources.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: oxygen: fix distorted output on AK4396-based cards
  Revert "ALSA: hda - Added model selection for iMac 24""