The efer_reload is never used since
commit 26bb0981 ("KVM: VMX: Use shared msr infrastructure"),
so remove it.
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This patch allow to enable x86 feature TOPOEXT. This is needed to provide
information about SMT on AMD Zen CPUs to the guest.
Signed-off-by: NStanislav Lanci <pixo@polepetko.eu>
Tested-by: NNick Sarnie <commendsarnex@gmail.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBabu Moger <babu.moger@amd.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

I was investigating an issue with seabios >= 1.10 which stopped working
for nested KVM on Hyper-V. The problem appears to be in
handle_ept_violation() function: when we do fast mmio we need to skip
the instruction so we do kvm_skip_emulated_instruction(). This, however,
depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
However, this is not the case.

Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
EPT MISCONFIG occurs. While on real hardware it was observed to be set,
some hypervisors follow the spec and don't set it; we end up advancing
IP with some random value.

I checked with Microsoft and they confirmed they don't fill
VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.

Fix the issue by doing instruction skip through emulator when running
nested.

Fixes: 68c3b4d1Suggested-by: NRadim Krčmář <rkrcmar@redhat.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

All d-entries for vcpu have the same, "anon_inode:kvm-vcpu". That means
it is impossible to know the mapping between fds for vcpu and vcpu
from userland.

    # LC_ALL=C ls -l /proc/617/fd | grep vcpu
    lrwx------. 1 qemu qemu 64 Jan  7 16:50 18 -> anon_inode:kvm-vcpu
    lrwx------. 1 qemu qemu 64 Jan  7 16:50 19 -> anon_inode:kvm-vcpu

It is also impossible to know the mapping between vma for kvm_run
structure and vcpu from userland.

    # LC_ALL=C grep vcpu /proc/617/maps
    7f9d842d0000-7f9d842d3000 rw-s 00000000 00:0d 20393                      anon_inode:kvm-vcpu
    7f9d842d3000-7f9d842d6000 rw-s 00000000 00:0d 20393                      anon_inode:kvm-vcpu

This change adds vcpu id to d-entries for vcpu. With this change
you can get the following output:

    # LC_ALL=C ls -l /proc/617/fd | grep vcpu
    lrwx------. 1 qemu qemu 64 Jan  7 16:50 18 -> anon_inode:kvm-vcpu:0
    lrwx------. 1 qemu qemu 64 Jan  7 16:50 19 -> anon_inode:kvm-vcpu:1

    # LC_ALL=C grep vcpu /proc/617/maps
    7f9d842d0000-7f9d842d3000 rw-s 00000000 00:0d 20393                      anon_inode:kvm-vcpu:0
    7f9d842d3000-7f9d842d6000 rw-s 00000000 00:0d 20393                      anon_inode:kvm-vcpu:1

With the mappings known from the output, a tool like strace can report more details
of qemu-kvm process activities. Here is the strace output of my local prototype:

    # ./strace -KK -f -p 617 2>&1 | grep 'KVM_RUN\| K'
    ...
    [pid   664] ioctl(18, KVM_RUN, 0)       = 0 (KVM_EXIT_MMIO)
     K ready_for_interrupt_injection=1, if_flag=0, flags=0, cr8=0000000000000000, apic_base=0x000000fee00d00
     K phys_addr=0, len=1634035803, [33, 0, 0, 0, 0, 0, 0, 0], is_write=112
    [pid   664] ioctl(18, KVM_RUN, 0)       = 0 (KVM_EXIT_MMIO)
     K ready_for_interrupt_injection=1, if_flag=1, flags=0, cr8=0000000000000000, apic_base=0x000000fee00d00
     K phys_addr=0, len=1634035803, [33, 0, 0, 0, 0, 0, 0, 0], is_write=112
    ...
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

For EPT-violations that are triggered by a read, the pages are also mapped with
write permissions (if their memory region is also writable). That would avoid
getting yet another fault on the same page when a write occurs.

This optimization only happens when you have a "struct page" backing the memory
region. So also enable it for memory regions that do not have a "struct page".

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

KVM/ARM Changes for v4.16

The changes for this version include icache invalidation optimizations
(improving VM startup time), support for forwarded level-triggered
interrupts (improved performance for timers and passthrough platform
devices), a small fix for power-management notifiers, and some cosmetic
changes.

KVM: s390: update maintainers

When I introduced a static key to avoid work in the critical path for
userspace irqchips which is very rarely used, I accidentally messed up
my logic and used && where I should have used ||, because the point was
to short-circuit the evaluation in case userspace irqchips weren't even
in use.

This fixes an issue when running in-kernel irqchip VMs alongside
userspace irqchip VMs.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Fixes: c44c232ee2d3 ("KVM: arm/arm64: Avoid work when userspace iqchips are not used")
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

We were not decrementing the static key count in the right location.
kvm_arch_vcpu_destroy() is only called to clean up after a failed
VCPU create attempt, whereas kvm_arch_vcpu_free() is called on teardown
of the VM as well.  Move the static key decrement call to
kvm_arch_vcpu_free().
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

After the recently introduced support for level-triggered mapped
interrupt, I accidentally left the VCPU thread busily going back and
forward between the guest and the hypervisor whenever the guest was
blocking, because I would always incorrectly report that a timer
interrupt was pending.

This is because the timer->irq.level field is not valid for mapped
interrupts, where we offload the level state to the hardware, and as a
result this field is always true.

Luckily the problem can be relatively easily solved by not checking the
cached signal state of either timer in kvm_timer_should_fire() but
instead compute the timer state on the fly, which we do already if the
cached signal state wasn't high.  In fact, the only reason for checking
the cached signal state was a tiny optimization which would only be
potentially faster when the polling loop detects a pending timer
interrupt, which is quite unlikely.

Instead of duplicating the logic from kvm_arch_timer_handler(), we
enlighten kvm_timer_should_fire() to report something valid when the
timer state is loaded onto the hardware.  We can then call this from
kvm_arch_timer_handler() as well and avoid the call to
__timer_snapshot_state() in kvm_arch_timer_get_input_level().
Reported-by: NTomasz Nowicki <tn@semihalf.com>
Tested-by: NTomasz Nowicki <tn@semihalf.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

As I have neither too much time nor access to the architecture
documentation anymore, let's switch my status from maintainer to
reviewer. Janosch will step in as second maintainer.
Acked-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Acked-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Acked-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

KVM: s390: Fixes and features for 4.16 part 2

- exitless interrupts for emulated devices (Michael Mueller)
- cleanup of cpuflag handling (David Hildenbrand)
- kvm stat counter improvements (Christian Borntraeger)
- vsie improvements (David Hildenbrand)
- mm cleanup (Janosch Frank)

The patch modifies the previously defined GISA data structure to be
able to store two GISA formats, format-0 and format-1. Additionally,
it verifies the availability of the GISA format facility and enables
the use of a format-1 GISA in the SIE control block accordingly.

A format-1 can do everything that format-0 can and we will need it
for real HW passthrough. As there are systems with only format-0
we keep both variants.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The GISA format facility is required by the host to be able to process
a format-1 GISA. If not available, the used GISA format will be format-0.
All format-1 related extension will not be available in this case.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If the AIV facility is available, a GISA will be used to manage emulated
adapter interrupts.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The function returns a pending I/O interrupt with the highest
priority defined by its ISC.

Together with AIV activation, pending adapter interrupts are
managed by the GISA IPM. Thus kvm_s390_get_io_int() needs to
inspect the IPM as well when the interrupt with the highest
priority has to be identified.

In case classic and adapter interrupts with the same ISC are
pending, the classic interrupt will be returned first.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Pending interrupts marked in the GISA IPM are required to
become part of the answer of ioctl KVM_DEV_FLIC_GET_ALL_IRQS.

The ioctl KVM_DEV_FLIC_ENQUEUE is already capable to enqueue
adapter interrupts when a GISA is present.

With ioctl KVM_DEV_FLIC_CLEAR_IRQS the GISA IPM wil be cleared
now as well.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The function isc_to_int_word() allows the generation of interruption
words for adapter interrupts.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.

This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.

To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.

Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.

Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).

The code will be activated with a follow-up patch.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The patch adds an indication for the presence Adapter Interruption
Virtualization facility (AIV) of the general channel subsystem
characteristics.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[change wording]

The patch implements routines to access the GISA to test and modify
its Interruption Pending Mask (IPM) from the host side.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds a MSB0 bit numbering version of test_and_clear_bit().
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In preperation to support pass-through adapter interrupts, the Guest
Interruption State Area (GISA) and the Adapter Interruption Virtualization
(AIV) features will be introduced here.

This patch introduces format-0 GISA (that is defines the struct describing
the GISA, allocates storage for it, and introduces fields for the
GISA address in kvm_s390_sie_block and kvm_s390_vsie).

As the GISA requires storage below 2GB, it is put in sie_page2, which is
already allocated in ZONE_DMA. In addition, The GISA requires alignment to
its integral boundary. This is already naturally aligned via the
padding in the sie_page2.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch prepares a simplification of bit operations between the irq
pending mask for emulated interrupts and the Interruption Pending Mask
(IPM) which is part of the Guest Interruption State Area (GISA), a feature
that allows interrupt delivery to guests by means of the SIE instruction.

Without that change, a bit-wise *or* operation on parts of these two masks
would either require a look-up table of size 256 bytes to map the IPM
to the emulated irq pending mask bit orientation (all bits mirrored at half
byte) or a sequence of up to 8 condidional branches to perform tests of
single bit positions. Both options are to be rejected either by performance
or space utilization reasons.

Beyond that this change will be transparent.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags().
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it in all places where we set cpuflags.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-3-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

No need to make this function special. Move it to a header right away.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The overall instruction counter is larger than the sum of the
single counters. We should try to catch all instruction handlers
to make this match the summary counter.
Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe....
and remove other unused ones.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

Make the diagnose counters also appear as instruction counters.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>

We never call it with anything but PROT_READ. This is a left over from
an old prototype. For creation of shadow page tables, we always only
have to protect the original table in guest memory from write accesses,
so we can properly invalidate the shadow on writes. Other protections
are not needed.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123212618.32611-1-david@redhat.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This way, the values cannot change, even if another VCPU might try to
mess with the nested SCB currently getting executed by another VCPU.

We now always use the same gpa for pinning and unpinning a page (for
unpinning, it is only relevant to mark the guest page dirty for
migration).
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-3-david@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Another VCPU might try to modify the SCB while we are creating the
shadow SCB. In general this is no problem - unless the compiler decides
to not load values once, but e.g. twice.

For us, this is only relevant when checking/working with such values.
E.g. the prefix value, the mso, state of transactional execution and
addresses of satellite blocks.

E.g. if we blindly forward values (e.g. general purpose registers or
execution controls after masking), we don't care.

Leaving unpin_blocks() untouched for now, will handle it separately.

The worst thing right now that I can see would be a missed prefix
un/remap (mso, prefix, tx) or using wrong guest addresses. Nothing
critical, but let's try to avoid unpredictable behavior.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-2-david@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

cpu_pm_enter() calls the pm notifier chain with CPU_PM_ENTER, then if
there is a failure: CPU_PM_ENTER_FAILED.

When KVM receives CPU_PM_ENTER it calls cpu_hyp_reset() which will
return us to the hyp-stub. If we subsequently get a CPU_PM_ENTER_FAILED,
KVM does nothing, leaving the CPU running with the hyp-stub, at odds
with kvm_arm_hardware_enabled.

Add CPU_PM_ENTER_FAILED as a fallthrough for CPU_PM_EXIT, this reloads
KVM based on kvm_arm_hardware_enabled. This is safe even if CPU_PM_ENTER
never gets as far as KVM, as cpu_hyp_reinit() calls cpu_hyp_reset()
to make sure the hyp-stub is loaded before reloading KVM.

Fixes: 67f69197 ("arm64: kvm: allows kvm cpu hotplug")
Cc: <stable@vger.kernel.org> # v4.7+
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

It seems it hasn't even been used before the last cleanup and was
overlooked.
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1513169613-13509-12-git-send-email-frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Add an extra temporary register parameter to uaccess_ttbr0_disable which
is about to be required for arm64 PAN support.

This patch doesn't introduce any functional change but ensures that the
kernel compiles once the KVM/ARM tree is merged with the arm64 tree by
ensuring a trivially mergable conflict with commit
6b88a32c
("arm64: kpti: Fix the interaction between ASID switching and software PAN").

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Remove duplicate expression in nested_vmx_prepare_msr_bitmap, and make
the register names clearer in hardware_setup.
Suggested-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[Resolved rebase conflict after removing Intel PT. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>