Replace lp5521/5523_unregister_sysfs() with lp55xx_unregister_sysfs().

 On unloading the driver, running engines should be stopped.
 Use explicit driver function, lp5521/5523_stop_engine().

 Unused functions are removed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 lp55xx_unregister_sysfs() is used for removing lp55xx device attributes.
 Chip specific and engine attributes are removed on unloading the driver.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521 and LP5523 have a selftest function which is run via the sysfs.
 Use lp55xx driver data and R/W functions rather than lp5521/5523 private data
 and functions.
 Additionally, if-statements are changed for code simplicity.
 Unused functions, lp5521/5523_read() are removed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 lp5521/5523_register_sysfs() are replaced with lp55xx common driver function,
 lp55xx_register_sysfs().
 Chip specific device attributes are configurable using 'dev_attr_group'.

 Error condition name is changed:
 use specific error condition, 'err_register_sysfs' rather than unclear name,
 'fail2'.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 To support device specific attributes, new common driver function is added.
 Eventually those are created on registering the sysfs with common dev attrs.
 Furthermore, this patch makes adding device attributes simple in each driver.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP55xx common driver provides generic firmware interface
 for running a LED pattern.
 LP5521 and LP5523 have many device attributes for running patterns.
 This patch cleans up those complex code.

 Removed device attributes:
 engine1_mode
 engine2_mode
 engine3_mode
 engine1_load
 engine2_load
 engine3_load
 engine1_leds
 engine2_leds
 engine3_leds

 All device attributes and functions are replaced with two callback functions,
 'firmware_cb' and 'run_engine'.

 New engine functions:
 lp5523_load/stop/run_engine(), lp5523_update_program_memory() and
 lp5523_wait_opmode_done()
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP55xx common driver provides generic firmware interface
 for running a LED pattern.
 LP5521 and LP5523 have many device attributes for running patterns.
 This patch cleans up those complex code.

 Removed device attributes:
 engine1_mode
 engine2_mode
 engine3_mode
 engine1_load
 engine2_load
 engine3_load
 led_pattern

 All device attributes and functions are replaced with two callback functions,
 'firmware_cb' and 'run_engine'.

 New engine functions:
 lp5521_load/stop/run_engine(), lp5521_update_program_memory() and
 lp5521_wait_opmode_done()
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 This patch provides additional device attributes which enable
 loading the firmware. ('select_engine' and 'run_engine')
 To run a LED pattern, two parts of driver should be enabled.

 Common features : lp55xx-common
 ===============================
 Firmware interface for loading LED patterns

 Chip specific features : leds-lp5521, leds-lp5523
 =================================================
 Register addresses for loading firmware data
 Register addresses for running selected engine

 Pattern programming sequence
 ============================
 LP55xx chips have three program engines.
 To load and run a LED pattern, the programming sequence is as follows.
 (1) Select an engine number (1/2/3)
 (2) Set engine mode to load
 (3) Write pattern data into selected area
 (4) Set engine mode to run

 This sequence is almost same as the firmware interface.
 (1) Select an engine number               : 'select_engine' dev attribute
 (2) Mode change to load                   : 'loading' of firmware class
 (3) Write pattern data into selected area : 'data' of firmware class
 (4) Mode change to run                    : 'run_engine' dev attribute

 (1) and (4) are device specific features which provide callback functions
 (2) and (3) are common features.

 For example,
 echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
 echo 1 > /sys/class/firmware/lp5521/loading
 echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
 echo 0 > /sys/class/firmware/lp5521/loading
 echo 1 > /sys/bus/i2c/devices/xxxx/run_engine

 As soon as 'loading' is set to 0, registered callback is called.
 Inside the callback, the selected engine is loaded and memory is updated.
 To run programmed pattern, 'run_engine' attribute should be enabled.

 Device specific data structure
 ==============================
 o Firmware callback
   load selected engine and update program memory
 o Run engine
   change the engine mode
 o 'engine_idx' and firmware data, 'fw'
   Those are used in the driver internally with callback functions
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP55xx family chips have internal program memory which run various patterns.
 Using this memory, LEDs continue on blinking/dimming without continuous I2C
 commands. That means the I2C HOST can be entered into sleep once the memory
 is updated.

 An application can get hex data from a file and write them into
 the program memory through the I2C. This is general firwmare interface.

 This patch is the initial step for adding the firmware interface.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Use lp55xx_unregister_leds() rather than duplicate code.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 To unregister led class devices and sysfs attributes,
 LP5521 and LP5523 have each driver function.
 This patch makes both drivers simple using common driver function,
 lp55xx_unregister_leds().

 And some unused variables are removed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LED current is configurable via the sysfs.
 Max current is a read-only attribute.
 These attributes code can be shared in lp55xx common driver.

 Device attributes: 'led_current' and 'max_current'
 move to lp55xx common driver

 Replaced functions:
 show_max_current()  => lp55xx_show_max_current()
 show_current()      => lp55xx_show_current()
 store_current()     => lp55xx_store_current()

 LED setting function: set_led_current()
 Current registers are device specific, so configurable function is added
 in each driver.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 lp5521_set_brightness() and lp5523_set_brightness() are replaced with
 common function, lp55xx_set_brightness().
 This function is invoked when the brightness of each LED channel is updated.
 LP5521 and LP5523 have different register address for the brightness control,
 so this work is done by chip specific brightness_work_fn().

 lp5521/5523_led_brightness_work():
 use lp55xx_led and lp55xx_chip data structure.
 use lp55xx write function.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 lp5521_init_led() and lp5523_init_led() are replaced with one common function,
 lp55xx_init_led().
 Max channels is configurable, so it's used in lp55xx_init_led().

 'LP5523_LEDS' are changed to 'LP5523_MAX_LEDS'.

 lp55xx_set_brightness, lp55xx_led_attributes: skeleton
 Will be filled in next patches.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LED class devices are registered in lp5521_register_leds() and
 lp5523_register_leds().
 Two separate functions are merged into consolidated lp55xx function,
 lp55xx_register_leds().

 Error handling fix:
 Unregistering LEDS are handled in lp55xx_register_leds() when LED registration
 failure occurs. So each driver error handler is changed to 'err_register_leds'

 Chip dependency: 'brightness_work_fn' and 'set_led_current'
 To make the structure abstract, both functions are configured in each driver.
 Those functions should be done by each driver because register control is
 chip-dependant work.

 lp55xx_init_led: skeleton
 Will be filled in next patch
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Two separate de-init functions are merged into one common function.
 And it is used in err_post_init of lp55xx_init_device().
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 lp5521/5523_init_device() are replaced with lp55xx common function,
 lp55xx_init_device().

 Error handler in init_device:
 deinit function are matched with 'err_post_init' section in
 lp55xx_init_device().

 Remove LP5523 engine intialization code:
 Engine functionality is not mandatory but optional.
 Moreover engine initialization is done internally with device reset command.
 Therefore, this code is unnecessary.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521/5523 chip configuration is replaced with lp55xx common function,
 lp55xx_post_init_device().

 Name change:
 lp5521/5523_configure() to lp5521/5523_post_init_device()
 These are called in init function.

 Register access function
 Argument type is changed from 'i2c_client' to 'lp55xx_chip'.
 Use exported R/W functions of lp55xx common driver.

 Temporary variables in lp5521/5523_init_device()
 These functions will be removed but temporary variables are needed for
 blocking build warnings - incompatible pointer.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521/5523 chip detection functions are replaced with lp55xx common function,
 lp55xx_detect_device().
 Chip dependent address and values are configurable in each driver.
 In init function, chip detection is executed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521/5523 reset device functions are moved to lp55xx common driver.
 Value of register address and value are chip dependent.
 Those are configured in each driver.
 In init function, reset command is executed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521/5523 platform data functions are moved to lp55xx common driver.
 New init function, lp55xx_init_device() is created.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 This patch is a preceding step for making common lp55xx init function.

 Return code:
 Do not use 'OR' arithmetic for the result.
 If some error occurs, just return it.

 Remove engine verification code:
 To check whether internal engine works or not, many lines of code are executed.
 However, this job is unnecessary during the chip initialization because
 the engine usage is not mandatory but optional function.
 LED engines are enabled when specific LED pattern is loaded.
 Therefore, this verification code is removed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 This patch is a preceding step for making common lp55xx init function.

 LP5521_REG_R_CURRENT register code moved:
 Chip specific code moved from lp5521_init_device() to lp5521_configure().

 Remove engine init function:
 LP5521 has internal program engines which are used for running LED patterns.
 (blinking, ramp up/down and other emotional visual effects)
 Engine initialization is done by reset command in lp5521_init_device().
 Remove this duplicate code.

 Return code:
 Do not use 'OR' arithmetic for the result.
 If some error occus, just return it.

 Enable latency:
 Use explicit named function, lp5521_wait_enable_done().
 According to the datasheet, 500us is guaranteed time.
 Thus wait time is changed from 1000us to 500us.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 LP5521 and LP5523 data structures have common features.
 Use common lp55xx data structures rather than chip specific data.
 Legacy code in probe is replaced with this new data structures.

 lp55xx_chip          : Common data between lp5521_chip and lp5523_chip
 lp55xx_led           : Common LED structure between lp5521_led and lp5523_led
 lp55xx_platform_data : Common platform data between lp5521_platform_data and
                        lp5523_platform_data
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Change the name of chip data structure and platform data.
 This patch is a preceding step for cleaning up lp5521/5523 probe and remove.
 These data will be replaced with new lp55xx common data structures
 in next patch.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 This patch supports basic common driver code for LP5521, LP5523/55231 devices.

 ( Driver Structure Data )

 lp55xx_led and lp55xx_chip
 In lp55xx common driver, two different data structure is used.
 o lp55xx_led
   control multi output LED channels such as led current, channel index.
 o lp55xx_chip
   general chip control such like the I2C and platform data.

 For example, LP5521 has maximum 3 LED channels.
 LP5523/55231 has 9 output channels.

 lp55xx_chip for LP5521 ... lp55xx_led #1
                            lp55xx_led #2
                            lp55xx_led #3

 lp55xx_chip for LP5523 ... lp55xx_led #1
                            lp55xx_led #2
                            .
                            .
                            lp55xx_led #9

 ( Platform Data )

 LP5521 and LP5523/55231 have own specific platform data.
 However, this data can be handled with just one platform data structure.
 The lp55xx platform data is declared in the header.
 This structure is derived from leds-lp5521.h and leds-lp5523.h
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Chip specific function is configured when the device is initialized.
 So _configure() is moved to each device init function.

 If chip configuration gets failed, the device is de-initialized in
 each _init_device(), not probe().

 For compile error fix, function type declarations are added.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Use explicit each driver function rather than raw command.
 These function will be merged into the lp55xx common driver.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 To make LED unregistration code simple, new function, _unregister_leds()
 is added in each driver.
 This patch is a preceding step for lp55xx common driver architecture.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 To make LED initialization code simple, new function, _register_leds()
 is added at each driver.
 This patch is a preceding step for lp55xx common driver architecture.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 Device de-initialization code is moved to _deinit_device() at each driver.
 This patch is a preceding step for lp55xx common driver architecture.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

 To make _probe() simple, device initialization code is moved to
 _init_device() at each driver.
 This patch is a preceding step for lp55xx common driver architecture.

 leds-lp5521:
 When 'lp5521_init_device()' gets failed, error handling should be 'fail1'
 rather than 'fail2'.
   fail1: releasing platform resource and return code
   fail2: releasing allocated LED devices with handling 'fail1'
 The 'lp5521_init_device()' is called before creating LED devices.
 Thus, 'goto fail1' is proper error handler of this function.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Fixed the checkpatch warning as below:

  WARNING: static const char * array should probably be static const char * const
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

This macro is used to create a struct pci_device_id array.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Fixed the checkpatch warning as below:

  WARNING: suspect code indent for conditional statements (8, 8)
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Fixed the checkpatch warning as below:

  WARNING: Avoid CamelCase: <devAttr>

Rename devAttr to attr.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Fixed the checkpatch warning as below:

  WARNING: Avoid CamelCase: <devAttr>

Rename devAttr to attr.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

I spent a few minutes to understand why the code catching the mismatch case
by checking if k is 0 or not. And the code using "k - 1" as array index is
unusual.

This patch checks acceptable rate from the lowest rate, and then we don't need
to subtract k by 1. This change improves the readability.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

Add lm3530_led_enable() and lm3530_led_disable() helper functions.
This ensures setting drvdata->enable to correct status if regulator_disable
fails.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NShreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Acked-by: NMilo Kim <milo.kim@ti.com>
Tested-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

The lp8788-keyled is a platform driver of lp8788-mfd. The platform
device is allocated when mfd_add_devices() is called in lp8788-mfd.
On the other hand, 'lp->dev' is the i2c client device.

Therefore, this 'platform_device' is a proper parent device in case
of resource managed mem alloc, registering led device and device
kernel messages.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NBryan Wu <cooloney@gmail.com>