Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For KVM can reuse the type define, and need them to support shadow MTRR.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Prepare for exporting them.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Impact: cleanup

enable_mtrr_cleanup is static, and is never set to anything but 0 or 1.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: fix a crash/hard-reboot on certain configs while enabling cpu runtime

On some archs, the boot of a secondary cpu can have an early fragile state.
On x86-64, the pda is not initialized on the first stage of a cpu boot but
it is needed to get the cpu number and the current task pointer. This data
is needed during tracing. As they were dereferenced at this stage, we got a
crash while tracing a cpu being enabled at runtime.

Some other archs like ia64 can have such kind of issue too.

Changes on v2:

We dropped the previous solution of a per-arch called function to guess the
current state of a cpu. That could slow down the tracing.

This patch removes the -pg flag on arch/x86/kernel/cpu/common.c where
the low level cpu boot functions exist, on start_secondary() and a helper
function used at this stage.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, avoid sparse warnings, reduce kernel size a bit

Fixes these sparse warnings:

 arch/x86/kernel/cpu/common.c:869:6: warning: symbol 'boot_cpu_stack' was not declared. Should it be static?
 arch/x86/kernel/cpu/common.c:910:6: warning: symbol 'boot_exception_stacks' was not declared. Should it be static?
Signed-off-by: NJaswinder Singh <jaswinder@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix wrong cache sharing detection on platforms supporting > 8 bit apicid's

In the presence of extended topology eumeration leaf 0xb provided
by cpuid, 32bit extended initial_apicid in cpuinfo_x86 struct will be
updated by detect_extended_topology(). At this instance, we should also
reinit the apicid (which could also potentially be extended to 32bit).

With out this there will potentially be duplicate apicid's populated in the
per cpu's cpuinfo_x86 struct, resulting in wrong cache sharing topology etc
detected by init_intel_cacheinfo().
Reported-by: NDimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NDimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>

Impact: Remove cpumask_t's from stack.

Simple transition to work_on_cpu(), rather than cpumask games.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: jacob.shin@amd.com

Impact: remove cpumask_t from stack.

We should not try to save and restore cpus_allowed on current.

We can't use work_on_cpu() here, since it's in the hotplug cpu path
(if anyone else tries to get the hotplug lock from a workqueue we
could deadlock against them).

Fortunately, we can just use smp_call_function_single() since the
function can run from an interrupt.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@tv-sign.ru>

Impact: fix disabled MCE after resume

Don't prevent multiple initialization of MCEs.

Back from early prehistory mcheck_init() has a reentry check. Presumably
that was needed in very old kernels to prevent it entering twice.

But as Andreas points out this prevents CPU hotplug (and therefore resume)
to correctly reinitialize MCEs when a AP boots again after being
offlined.

Just drop the check.
Reported-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Replace incrementing irq stat with inc_irq_stat() in non-unified functions.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: reward non-stop TSCs with good TSC-based clocksources, etc.

Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means
that the TSC is invariant with C/P/T states and always runs at constant
frequency.

With Intel CPUs, we have 3 classes
* CPUs where TSC runs at constant rate and does not stop n C-states
* CPUs where TSC runs at constant rate, but will stop in deep C-states
* CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep
  C-states.

To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a
second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at
constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates
that TSC does not stop in deep C-states.

CPUID_0x8000000_Bit8 indicates both these feature bit can be set.
We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel
CPUs, based on model checks. We can use TSC on such CPUs for time, as long as
those CPUs do not support/enter deep C-states.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.

Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com

Impact: cleanup

Move the BTS bits from ptrace.c into ds.c.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new "power-tracer" ftrace plugin

This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.

An example way of using this is:

 mount -t debugfs none /sys/kernel/debug
 echo cstate > /sys/kernel/debug/tracing/current_tracer
 echo 1 > /sys/kernel/debug/tracing/tracing_enabled
 sleep 1
 echo 0 > /sys/kernel/debug/tracing/tracing_enabled
 cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A workaround for AMD CPU family 11h erratum 311 might cause that the
P-state Status Register shows a "current P-state" which is larger than
the "current P-state limit" in P-state Current Limit Register. For the
wrong P-state value there is no ACPI _PSS object defined and
powernow-k8/cpufreq can't determine the proper CPU frequency for that
state.

As a consequence this can cause a panic during boot (potentially with
all recent kernel versions -- at least I have reproduced it with
various 2.6.27 kernels and with the current .28 series), as an
example:

powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \
)
powernow-k8:    0 : pstate 0 (2200 MHz)
powernow-k8:    1 : pstate 1 (1100 MHz)
powernow-k8:    2 : pstate 2 (600 MHz)
BUG: unable to handle kernel paging request at ffff88086e7528b8
IP: [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
PGD 202063 PUD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16
RIP: 0010:[<ffffffff80486361>]  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0\
f
Synaptics claims to have extended capabilities, but I'm not able to read them.<6\
6
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0
RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c
RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080
R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10
R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000
Unable to initialize Synaptics hardware.
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0)
Stack:
 ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7
 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000
 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10
Call Trace:
 [<ffffffff804863c7>] ? cpufreq_stat_notifier_trans+0x51/0x83
 [<ffffffff8024b46c>] ? notifier_call_chain+0x29/0x4c
 [<ffffffff8024b561>] ? __srcu_notifier_call_chain+0x46/0x61
 [<ffffffff8048496d>] ? cpufreq_notify_transition+0x93/0xa9
 [<ffffffff8021ab8d>] ? powernowk8_target+0x1e8/0x5f3
 [<ffffffff80486687>] ? cpufreq_governor_performance+0x1b/0x20
 [<ffffffff80484886>] ? __cpufreq_governor+0x71/0xa8
 [<ffffffff80484b21>] ? __cpufreq_set_policy+0x101/0x13e
 [<ffffffff80485bcd>] ? cpufreq_add_dev+0x3f0/0x4cd
 [<ffffffff8048577a>] ? handle_update+0x0/0x8
 [<ffffffff803c2062>] ? sysdev_driver_register+0xb6/0x10d
 [<ffffffff8056592c>] ? powernowk8_init+0x0/0x7e
 [<ffffffff8048604c>] ? cpufreq_register_driver+0x8f/0x140
 [<ffffffff80209056>] ? _stext+0x56/0x14f
 [<ffffffff802c2234>] ? proc_register+0x122/0x17d
 [<ffffffff802c23a0>] ? create_proc_entry+0x73/0x8a
 [<ffffffff8025c259>] ? register_irq_proc+0x92/0xaa
 [<ffffffff8025c2c8>] ? init_irq_proc+0x57/0x69
 [<ffffffff807fc85f>] ? kernel_init+0x116/0x169
 [<ffffffff8020cc79>] ? child_rip+0xa/0x11
 [<ffffffff807fc749>] ? kernel_init+0x0/0x169
 [<ffffffff8020cc6f>] ? child_rip+0x0/0x11
Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\

RIP  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
 RSP <ffff88006fb83b20>
CR2: ffff88086e7528b8
---[ end trace 0678bac75e67a2f7 ]---
Kernel panic - not syncing: Attempted to kill init!

In short, aftereffect of the wrong P-state is that
cpufreq_stats_update() uses "-1" as index for some array in

cpufreq_stats_update (unsigned int cpu)
{
...
     if (stat->time_in_state)
                stat->time_in_state[stat->last_index] =
                        cputime64_add(stat->time_in_state[stat->last_index],
                                      cputime_sub(cur_time, stat->last_time));
...
}

Fortunately, the wrong P-state value is returned only if the core is
in P-state 0. This fix solves the problem by detecting the
out-of-range P-state, ignoring it, and using "0" instead.

Cc: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Impact: fix sparse build warning

Fix the following sparse warnings:

  arch/x86/kernel/cpu/hypervisor.c:37:15: warning: symbol
  'get_hypervisor_tsc_freq' was not declared. Should it be static?
  arch/x86/kernel/cpu/hypervisor.c:53:16: warning: symbol
  'init_hypervisor' was not declared. Should it be static?
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Cc: "Alok N Kataria" <akataria@vmware.com>
Cc: "Dan Hecht" <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix sparse build warning

Fix the following sparse warnings:

arch/x86/kernel/cpu/vmware.c:69:5: warning: symbol 'vmware_platform'
was not declared. Should it be static?
arch/x86/kernel/cpu/vmware.c:89:15: warning: symbol
'vmware_get_tsc_khz' was not declared. Should it be static?
arch/x86/kernel/cpu/vmware.c:107:16: warning: symbol
'vmware_set_feature_bits' was not declared. Should it be static?
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Cc: "Alok N Kataria" <akataria@vmware.com>
Cc: "Dan Hecht" <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: widen BTS/PEBS ptrace enablement to more CPU models

Move BTS initialisation out of an #ifdef CONFIG_X86_64 guard.

Assume core2 BTS and DS layout for future models of family 6 processors.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Should permit VMware detection on older platforms where the
vendor is changed.  Could theoretically cause a regression if some
weird serial number scheme contains the string "VMware" by pure
chance.  Seems unlikely, especially with the mixed case.

In some user configured cases, VMware may choose not to put a VMware specific
DMI string, but the product serial key is always there and is VMware specific.
Add a interface to check the serial key, when checking for VMware in the DMI
information.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: Fix possible failure to calibrate the TSC on Vmware near 4 GHz

The current version of the code to get the tsc frequency from
the VMware hypervisor, will be broken on processor with frequency
(4G-1) HZ, because on such processors eax will have UINT_MAX
and that would be legitimate.
We instead check that EBX did change to decide if we were able to
read the frequency from the hypervisor.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: Changes timebase calibration on Vmware.

Use the synthetic TSC_RELIABLE bit to workaround virtualization anomalies.

Virtual TSCs can be kept nearly in sync, but because the virtual TSC
offset is set by software, it's not perfect.  So, the TSC
synchronization test can fail. Even then the TSC can be used as a
clocksource since the VMware platform exports a reliable TSC to the
guest for timekeeping purposes. Use this bit to check if we need to
skip the TSC sync checks.

Along with this also set the CONSTANT_TSC bit when on VMware, since we
still want to use TSC as clocksource on VM running over hardware which
has unsynchronized TSC's (opteron's), since the hypervisor will take
care of providing consistent TSC to the guest.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: Changes timebase calibration on Vmware.

v3->v2 : Abstract the hypervisor detection and feature (tsc_freq) request
	 behind a hypervisor.c file
v2->v1 : Add a x86_hyper_vendor field to the cpuinfo_x86 structure.
	 This avoids multiple calls to the hypervisor detection function.

This patch adds function to detect if we are running under VMware.
The current way to check if we are on VMware is following,
#  check if "hypervisor present bit" is set, if so read the 0x40000000
   cpuid leaf and check for "VMwareVMware" signature.
#  if the above fails, check the DMI vendors name for "VMware" string
   if we find one we query the VMware hypervisor port to check if we are
   under VMware.

The DMI + "VMware hypervisor port check" is needed for older VMware products,
which don't implement the hypervisor signature cpuid leaf.
Also note that since we are checking for the DMI signature the hypervisor
port should never be accessed on native hardware.

This patch also adds a hypervisor_get_tsc_freq function, instead of
calibrating the frequency which can be error prone in virtualized
environment, we ask the hypervisor for it. We get the frequency from
the hypervisor by accessing the hypervisor port if we are running on VMware.
Other hypervisors too can add code to the generic routine to get frequency on
their platform.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: build fix on certain UP configs

fix:

 arch/x86/kernel/cpu/common.c: In function 'cpu_init':
 arch/x86/kernel/cpu/common.c:1141: error: 'boot_cpu_id' undeclared (first use in this function)
 arch/x86/kernel/cpu/common.c:1141: error: (Each undeclared identifier is reported only once
 arch/x86/kernel/cpu/common.c:1141: error: for each function it appears in.)

Pull in asm/smp.h on UP, so that we get the definition of
boot_cpu_id.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/cpu/common.c: In function 'early_identify_cpu':
 arch/x86/kernel/cpu/common.c:553: error: 'struct cpuinfo_x86' has no member named 'cpu_index'

as cpu_index is only available on SMP.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix /proc/cpuinfo output on x86/Voyager

Ever since

| commit 92cb7612
| Author: Mike Travis <travis@sgi.com>
| Date:   Fri Oct 19 20:35:04 2007 +0200
|
|     x86: convert cpuinfo_x86 array to a per_cpu array

We've had an extra field in cpuinfo_x86 which is cpu_index.
Unfortunately, voyager has never initialised this, although the only
noticeable impact seems to be that /proc/cpuinfo shows all zeros for
the processor ids.

Anyway, fix this by initialising the boot CPU properly and setting the
index when the secondaries update.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix on x86/Voyager

Given commits like this:

| Author: Suresh Siddha <suresh.b.siddha@intel.com>
| Date:   Tue Jul 29 10:29:19 2008 -0700
|
|     x86, xsave: enable xsave/xrstor on cpus with xsave support

Which deliberately expose boot cpu dependence to pieces of the system,
I think it's time to explicitly have a variable for it to prevent this
continual misassumption that the boot CPU is zero.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix x86/Voyager boot

CONFIG_SMP is used for features which work on *all* x86 boxes.
CONFIG_X86_SMP is used for standard PC like x86 boxes (for things like
multi core and apics)
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo said mtrr_cleanup() is big and ugly.

so break it up into more functions and make it more readable.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: fix missing CPUs in /proc/cpuinfo after CPU hotunplug/hotreplug

In my test, I found that if a cpu has been offline,
the next cpus may not be shown in the /proc/cpuinfo.

if one read() cannot consume the whole /proc/cpuinfo,
c_start() will be called again in the next read() calls.
And *pos has been increased by 1 by the caller(seq_read()).
if this time the cpu#*pos is offline, c_start() will return
NULL, and the next cpus can not be shown.

this fix use next_cpu_nr(*pos - 1, cpu_online_map) to
search the next unshown cpu.

the most easy way to reproduce this bug:
1) offline cpu#1             (cpu#0 is online)
2) dd ibs=2 if=/proc/cpuinfo
   the result is that only cpu#0 is shown.
   cpu#2 and cpu#3 .... cannot be shown in /proc/cpuinfo
   it's bug.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Update assorted email addresses and related info to point
to a single current, valid address.

additionally
- trivial CREDITS entry updates. (Not that this file means much any more)
- remove arjans dead redhat.com address from powernow driver
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The generated 'capflags.c' file wasn't properly ignored, and the list of
files in scripts/basic/ wasn't up-to-date.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

it can be called in the NMI path:

[    0.645999] calling  ftrace_dynamic_init+0x0/0xd6
[    0.647521] ------------[ cut here ]------------
[    0.647521] WARNING: at kernel/trace/ftrace.c:348 ftrace_record_ip+0x4e/0x252()
[    0.647521] Modules linked in:
[    0.647521] Pid: 15, comm: kstop1 Not tainted 2.6.27-rc1-tip #22686
[    0.647521]
[    0.647521] Call Trace:
[    0.647521]  <NMI>  [<ffffffff8024593f>] warn_on_slowpath+0x5d/0x84
[    0.647521]  [<ffffffff80220b99>] ? lapic_wd_event+0xb/0x5c
[    0.647521]  [<ffffffff80287b3b>] ftrace_record_ip+0x4e/0x252
[    0.647521]  [<ffffffff80211274>] mcount_call+0x5/0x31
[    0.647521]  [<ffffffff80220b9e>] ? lapic_wd_event+0x10/0x5c
[    0.647521]  [<ffffffff8083f3ec>] nmi_watchdog_tick+0x19d/0x1ad
[    0.647521]  [<ffffffff8083e875>] default_do_nmi+0x75/0x1e3
[    0.647521]  [<ffffffff8083f0b3>] do_nmi+0x5d/0x94
[    0.647521]  [<ffffffff8083e2d2>] nmi+0xa2/0xc2
[    0.647521]  [<ffffffff802b48c3>] ? check_bytes_and_report+0x11/0xcc
[    0.647521]  <<EOE>>  [<ffffffff80211274>] ? mcount_call+0x5/0x31
[    0.647521]  [<ffffffff802b49df>] check_object+0x61/0x1b0
[    0.647521]  [<ffffffff802b502a>] __slab_free+0x169/0x2ae
[    0.647521]  [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27
[    0.647521]  [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27
[    0.647521]  [<ffffffff802b60cd>] kmem_cache_free+0x85/0xb9
[    0.647521]  [<ffffffff80242dbf>] __cleanup_sighand+0x25/0x27
[    0.647521]  [<ffffffff80247b3d>] release_task+0x256/0x339
[    0.647521]  [<ffffffff802490b4>] do_exit+0x764/0x7ef
[    0.647521]  [<ffffffff8027624c>] __xchg+0x0/0x38
[    0.647521]  [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2
[    0.647521]  [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2
[    0.647521]  [<ffffffff8025922f>] kthread+0x4e/0x7b
[    0.647521]  [<ffffffff80212979>] child_rip+0xa/0x11
[    0.647521]  [<ffffffff80211c17>] ? restore_args+0x0/0x30
[    0.647521]  [<ffffffff802283a5>] ? native_load_tls+0x14/0x2e
[    0.647521]  [<ffffffff802591e1>] ? kthread+0x0/0x7b
[    0.647521]  [<ffffffff8021296f>] ? child_rip+0x0/0x11
[    0.647521]
[    0.647521] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.672032] initcall ftrace_dynamic_init+0x0/0xd6 returned 0 after 19 msecs

also mark it no-kprobes while at it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The flag_is_changeable_p() is used by
has_cpuid_p() which can return different results
in the code sequence below:

 if (!have_cpuid_p())
      identify_cpu_without_cpuid(c);

  /* cyrix could have cpuid enabled via c_identify()*/
  if (!have_cpuid_p())
      return;

Otherwise, the gcc 3.4.6 optimizes these two calls
into one which make the code not working correctly.

Cyrix cpus have the CPUID instruction enabled before
the second call to the have_cpuid_p() but
it is not detected due to the gcc optimization.
Thus the ARR registers (mtrr like) are not detected
on such a cpu.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Take it out of time initialization and move it to
cpu detection time.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some CPUs have vendor string in the middle of model_id instead of beginning
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>