Simple code reorganisation so we can change the logic for deciding what
full constraints are more easily.
Signed-off-by: NMark Brown <broonie@linaro.org>

The s5m8767 regulator driver parse always the voltage table of buck2/3/4.
If gpio_dvs feature isn't used and dts haven't included the voltage table
of buck2/3/4, s5m8767 regulator driver return error and file probe state.

This patch check only voltage table of buck on s5m8767_pmic_dt_parse_pdata()
if buck[2-4]_gpiodvs is true.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch parse 'buck[2-4]_ramp_enable and buck_ramp_delay' platform data
from dts file.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This reverts commit 68f75060.

Michael reported that with this patch we loose the fix_io code path from
da9052_reg_update. Thus revert it.
Reported-by: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

These patches add the ability to create an alternative device on which
a lookup for a certain supply should be conducted.

A common use-case for this would be devices that are logically
represented as a collection of drivers within Linux but are are
presented as a single device from device tree. It this case it is
necessary for each sub device to locate their supply data on the main
device.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch errors and warning.

  ERROR: spaces required around that '=' (ctx:VxV)
  ERROR: space required before the open parenthesis '('
  WARNING: line over 80 characters
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warning.

  WARNING: line over 80 characters
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warning.

  WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warnings.

  WARNING: Avoid unnecessary line continuations
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warning.

  WARNING: quoted string split across lines
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warnings.

  WARNING: please, no spaces at the start of a line
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warnings.

  WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the following checkpatch warning.

  WARNING: quoted string split across lines
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Correct spelling typo within various part of the kernel
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add REGULATOR_LINEAR_RANGE macro and convert regulator drivers to use it.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

linear ranges means each range has linear voltage settings.
So we can calculate max_uV for each linear range in regulator core rather than
set the max_uV field in drivers.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

commit 40b1936e (regulator: Introduce TI Adaptive Body Bias(ABB) on-chip
LDO driver) missed a pair of brackets which cause the wrong vset data to be
picked up from efuse, resulting in bad VBB voltage values.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

As per the devicetree binding document of TPS65910, the "regulators"
subnode should be under the parent node, not outside of parent node.
Hence to get the regulator node, the correct call is
of_get_child_by_name() rather than of_find_node_by_name() which searches
the "regulators" node from the parent node to end of DTS file.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

As per the devicetree binding document of TPS6586x, the "regulators"
subnode should be under the parent node, not outside of parent node.
Hence to get the regulator node, the correct call is
of_get_child_by_name() rather than of_find_node_by_name() which searches
the "regulators" node from the parent node to end of DTS file.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

As per the devicetree binding document of TPS65090, the "regulators"
subnode should be under the parent node, not outside of parent node.
Hence to get the regulator node, the correct call is
of_get_child_by_name() rather than of_find_node_by_name() which searches
the "regulators" node from the parent node to end of DTS file.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The device tree binding of Palmas regulator driver says as:

palmas_pmis {
	compatible = "ti,palmas-pmic";
	...
	regulators {
		...
	}
};

In this "regulators" subnode is expected to be part of parent node, not
the outside of parent node. Hence to get the regulator node, the correct
call is of_get_child_by_name() rather than of_find_node_by_name() which
actually searches the "regulators" node from the parent node to end of DTS
file.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

'break' after goto has no effect. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

This helps people spot if they have missed a supply from a device tree or
equivalent data structure.
Suggested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

AS3722_SDx_VSEL_MAX means the maximum selecter, the n_voltages should be
AS3722_SDx_VSEL_MAX + 1.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix off-by-one in the equation to calculate max_uV and also adjust the _min_uV
setting accordingly.

For LDOs:
The voltage select bits set the LDO output voltage 0.825V...3.3V, 25mV steps
  ....00h : LDO off
  01h-24h : V_LDO4 = 0.8V + ldo4_vsel * 25mV
                   = 0.825V + (ldo4_vsel - 1h) * 25mV
  25h-3Fh : do not use
  40h-7Fh : V_LDO4 = 1.725V + (ldo4_vsel - 40h) * 25mV

For SD2345:
The voltage select bits set the DC/DC output voltage level and power the DC/DC
converter down.
  ....00h : DC/DC powered down
  01h-40h : V_SD2 = 0.6V + sd2_vsel * 12.5mV
                  = 0.6125V + (sd2_vsel - 1h) * 12.5mV
  41h-70h : V_SD2 = 1.4V + (sd2_vsel - 40h) * 25mV
                  = 1.425V + (sd2_vsel - 41h) * 25mV
  71h-7Fh : V_SD2 = 2.6V + (sd2_vsel - 70h) * 50mV
                  = 2.65V + (sd2_vsel - 71h) * 50mV

Note, the third entry in as3722_sd2345_ranges is wrong in current code.
Fix it based on the datasheet.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use devm_regulator_register() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>