Added a counter rx_noskb_drop for failure to allocate an skb.
Summed the per-channel rx_nodesc_trunc counters earlier so that they can
 be included in rx_dropped.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an MCDI command times out (whether or not we find it
completed when we poll), call efx_mcdi_abandon(), which tells
all subsequent MCDI calls to fail-fast, and queues up an FLR.

Because an FLR doesn't lead to receiving any reboot even from
the MC (unlike most other types of reset), we have to call
efx_ef10_reset_mc_allocations.
In efx_start_all(), if a reset (of any kind) is pending, we
bail out.
Without this, attempts to reconfigure (e.g. change mtu) can
cause driver/mc state inconsistency if the first MCDI call
triggers an FLR.

For similar reasons, on EF10, in
efx_reset_down(method=RESET_TYPE_MCDI_TIMEOUT), set the number
of active queues to zero before calling efx_stop_all().
And, on farch, in efx_reset_up(method=RESET_TYPE_MCDI_TIMEOUT),
set active_queues and flushes pending & outstanding to zero.

efx_mcdi_mode_{poll,event}() should not take us out of fail-fast
 mode. Instead, this is done by efx_mcdi_reset() after the FLR
completes.

The new FLR reset_type RESET_TYPE_MCDI_TIMEOUT doesn't really
fit into the hierarchy of reset 'scopes' whereby efx_reset()
decides some resets subsume others.  Thus, it uses separate logic.

Also, fixed up some inconsistency around RESET_TYPE_MC_BIST,
which was in the wrong place in that hierarchy.
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove trailing blank lines in several files.
Use only one blank line between functions.
Add a blank line as a separator in a few places.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The operation can now fail, so change its return type to int.

Remove the inline wrapper while we're changing the signature.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The EF10 implementation already does this, and it makes more logical
sense to group the RSS hash key and indirection table together.
Rename the operation to rx_push_rss_config.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The primary function of an EF10 controller will share its clock
device with other functions in the same domain (which we call
secondary functions).  To this end, we need to associate functions
on the same controller.

We do not control probe order, so allow primary and secondary
functions to appear in any order.  Maintain global lists of all
primary functions and of unassociated secondary functions,
and a list of secondary functions on each primary function.

Use the VPD serial number to tell whether functions are part of the
same controller.  VPD will not be readable by virtual functions, so
this may need to be revisited later.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Original version by Stuart Hodgson.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The EF10 firmware can optionally insert RX timestamps in the packet
prefix.  These only include the clock minor value.  We must also
enable periodic time sync events on each event queue which provide
the high bits of the clock value.

[bwh: Combined and rebased several changes.
 Added the above description and some sanity checks for inline vs
 separate timestamps.
 Changed efx_rx_skb_attach_timestamp() to read the packet prefix
 from the skb head area.]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We can potentially pull the entire packet contents into the head area
and then free the page it was in.  In order to read an inline
timestamp safely, we need to copy the prefix into the head area as
well.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

I added efx_ptp_get_mode() to avoid moving the definition for
efx_ptp_data, since the current PTP mode is needed for
siena.c:siena_set_ptp_hwtstamp.

[bwh: Also move the rx_filters mask, and add kernel-doc]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We don't directly control RX ingress on Siena or any later
controllers, and so we cannot prevent packets from entering the RX
datapath while the RX queues are not set up.  This results in
the hardware incrementing RX_NODESC_DROP_CNT, but it's not an
error and we should not include it in error stats.

When bringing an interface up or down, pull (or wait for) stats and
count the number of packets that were dropped while the interface was
down.  Subtract this from the reported RX dropped count.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

To run BISTs the MC goes down in to a special mode where it will only
respond to MCDI from the testing PF, and TX, RX and event queues are
torn down. Other PFs get a message as it goes down to tell them it's
going down.

When the other PFs get this message, they check the soft status
register to tell when the MC has rebooted after BIST mode and they can
start recovery.

[bwh: Convert the test result to 1 or -1 as for earlier NICs]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal
to 14 on EF10. So, it should be taken into account if arch requires IP header
to be 4-bytes aligned (via NET_IP_ALIGN).

Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family')
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

When using firmware assisted TSO, we use a single DMA mapping for
the linear area of a TSO skb.

We still have to segment the super-packet and insert a descriptor
containing the original headers before each segment of payload, so we
can unmap the linear area only after the last segment is completed.
The unmapping information for the linear area is therefore associated
with the last header descriptor.

We calculate the DMA address to unmap from using the map length and
the invariant that the end of the DMA mapping matches the end of
the data referenced by the last descriptor.  But this invariant is
broken when there is TCP payload in the linear area.

Fix this by adding and using an explicit dma_offset field.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Sufficiently small linear packets can be copied into the PIO buffer
with a single call to memcpy_toio().  Non-linear packets require an
intermediate cache-line-sized buffer.

[bwh: I wrote the first version of this, but Jon did the hard work to
 handle non-linear packets.]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Try to allocate a segment of PIO buffer to each TX channel.  If
allocation fails, log an error but continue.

PIO buffers must be mapped separately from the NIC registers, with
write-combining enabled.  Where the host page size is 4K, we could
potentially map each VI's registers and PIO buffer separately.
However, this would add significant complexity, and we also need to
support architectures such as POWER which have a greater page size.
So make a single contiguous write-combining mapping after the
uncacheable mapping, aligned to the host page size, and link PIO
buffers there.  Where necessary, allocate additional VIs within
the write-combining mapping purely for access to PIO buffers.

Link all TX buffers to TX queues and the additional VIs in
efx_ef10_dimension_resources() and in efx_ef10_init_nic() after
an MC reboot.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Update the dates for files that have been added to in 2012-2013.
Drop the 'Solarstorm' brand name that's still lingering here.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

This adds support for the EF10 network controller architecture and the
SFC9100 family, starting with SFC9120 'Farmingdale', and bumps the
driver version to 4.0.

New features in the SFC9100 family include:

- Flexible allocation of internal resources to PCIe physical and virtual
  functions under firmware control
- RX event merging to reduce DMA writes at high packet rates
- Integrated RX timestamping
- PIO buffers for lower TX latency
- Firmware-driven data path that supports additional offload features
  and filter types
- Delivery of packets between functions and to multiple recipients,
  allowing firmware to implement a vswitch
- Multiple RX flow hash (RSS) contexts with their own hash keys and
  indirection tables
- 40G MAC (single port only)

...not all of which are enabled in this initial driver or the initial
firmware release.

Much of the new code is by Jon Cooper.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The TX path firmware for EF10 supports 'option descriptors' to control
offloads and various other features.  Add a flag and field for these
in struct efx_tx_buffer, and don't treat them as DMA descriptors on
completion.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

On EF10, the firmware will initiate a queue flush in certain
error cases.  We need to accept that flush events might appear
at any time after a queue has been initialised, not just when
we try to flush them.

We can handle Falcon-architecture in just the same way.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

RX DMA scatter is always enabled on EF10.  Adjust the common RX
completion handling to allow for this.

RX completion events on EF10 include the length used from a single
descriptor, not the cumulative length used.  Add a field to struct
efx_rx_queue to hold the cumulative length.

[bwh: Also fix a related comment]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

On EF10, event queue initialisation requires an MCDI request which
may return failure.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Define a flag for struct efx_rx_buffer and efx_rx_packet() that
indicates packet length must be read from the prefix.  If this
is set, read the length in __efx_rx_packet() (when the prefix
should have arrived in cache).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add a counter for TX merged completion events.

This is implemented in the common TX path, because the NIC event
handlers only know how many descriptors were completed, not how many
packets.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

EF10 uses an entirely different RX prefix format from Falcon-arch.
Extend struct efx_nic_type to describe this.

[bwh: Also replace the magic numbers used for the Falcon-arch RX prefix]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Various hardware statistics that are available for Siena are
unavailable or meaningless for Falcon.  Huntington adds further to the
NIC-type-specific statistics, as it has different MAC blocks from
Falcon/Siena.

All NIC types still provide most statistics by DMA, and use
little-endian byte order.

Therefore:
1. Add some general utility functions for reporting hardware statistics,
   efx_nic_describe_stats() and efx_nic_update_stats().
2. Add an efx_nic_type::describe_stats operation to get the number and
   names of statistics, implemented using efx_nic_describe_stats()
3. Change efx_nic_type::update_stats to store the core statistics
   (struct rtnl_link_stats64) or full statistics (array of u64) in a
   caller-provided buffer.  Use efx_nic_update_stats() to aid in the
   implementation.
4. Rename struct efx_ethtool_stat to struct efx_sw_stat_desc and
   EFX_ETHTOOL_NUM_STATS to EFX_ETHTOOL_SW_STAT_COUNT.
5. Remove efx_nic::mac_stats and struct efx_mac_stats.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into
struct efx_nic_type.  Move the implementations into the appropriate
source files.

Several NVRAM functions are now only called from MTD operations which
are now implemented in the same file (falcon.c or mcdi.c).  There is no
need for them to be extern, or to be defined at all if CONFIG_SFC_MTD
is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections
in those files.

Most of the SPI-related definitions are also only used in falcon.c,
so move them there.  Put the remainder of spi.h into nic.h (which
previously included it).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Currently we use struct efx_mtd to represent a physical NVRAM device
and struct efx_mtd_partition to represent a partition on that device.
But this only really makes sense for Falcon, as we don't know or care
whether MC-managed NVRAM partitions are on one or more physical
devices.  It complicates iteration and provides little benefit.
Therefore:

- Replace the pointer to efx_mtd in mtd_info::priv with a pointer to efx_nic
- Move the falcon_spi_device pointer into the union in struct efx_mtd_partition
- Move the device name to efx_mtd_partition::dev_type_name
- Move the efx_mtd_ops pointer to efx_nic::mtd_ops
- Make efx_nic::mtd_list a list of partitions
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

On Falcon we implement MAC filtering requested by the stack using the
MAC wrapper's single unicast filter and multicast hash filter.  Siena
is very similar, though MAC configuration is mediated by the MC.

Since MCDI operations may sleep, reconfiguration is deferred from
ndo_set_rx_mode to a work item.  However, it still updates the private
variables describing the filter state synchronously.  Contrary to
comments, the later use of these variables is not protected using the
address lock, resulting in race conditions.

Move the state update to a new function
efx_farch_filter_sync_rx_mode() and make the Falcon-arch MAC
configuration functions call that, so that its use is consistently
serialised by the mac_lock.

Invert and rename the promiscuous flag to the more accurate
unicast_filter, and comment that both this and multicast_hash are
not used on EF10.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Aside from accelerated RFS, there is almost nothing that can be shared
between the filter table implementations for the Falcon architecture
and EF10.

Move the few shared functions into efx.c and rx.c and the rest into
farch.c.  Introduce efx_nic_type operations for the implementation and
inline wrapper functions that call these.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Move the common state from struct efx_filter_state into struct efx_nic.
Rename struct efx_filter_state to efx_farch_filter_state and change
the type of efx_nic::filter_state to void *.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

efx_fini_eventq() needs to be idempotent but EF10 firmware is
picky about queue states.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

EF10 functions don't have a fixed BAR size, and the minimum is not
large enough for all the queues we might want to allocate.  We have to
find out the BAR size at run-time, and therefore phys_addr_channels
and mem_map_size cannot be defined per-NIC-type.

Change efx_nic_type::mem_map_size to a function pointer which is
called to find the wanted memory map size (before probe).

Replace efx_nic_type::phys_addr_channels with efx_nic::max_channels,
to be initialised by the probe function.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

MCDI v2 adds a second header dword with wider command and length
fields.  It also defines extra error codes.

Change the fallback error number for unknown MCDI error codes from EIO
to EPROTO.  EIO is treated as indicating the MCDI transport has failed
and we need to reset the function, which is rather drastic.

v2 error codes and lengths don't fit into completion events, so for a
v2-capable transport, always read the response header rather then
using the event fields.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add efx_nic_type operations for the many efx_nic functions that need
to be implemented different on EF10.  For now, change most of the
existing efx_nic_*() functions into inline wrappers.  As a later step,
we may be able to improve branch prediction for operations used on the
fast path by copying the pointers into each queue/channel structure.

Move the Falcon/Siena implementations to new file farch.c and rename
the functions and static data to use a prefix of 'efx_farch_'.

Move efx_may_push_tx_desc() to nic.h, as the EF10 TX code will also
use it.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Currently efx_stop_datapath() will try to flush our DMA queues (if DMA
is enabled), then finalise software and hardware state for each queue.
However, for EF10 we must ask the MC to finalise each queue, which
implicitly starts flushing it, and then wait for the flush events.
We therefore need to delegate more of this to the NIC type.

Combine all the hardware operations into a new NIC-type operation
efx_nic_type::fini_dmaq, and call this before tearing down the
software state and buffers for all the DMA queues.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>