- 06 1月, 2014 4 次提交
-
-
由 Sachin Kamat 提交于
Local variable used only in this file is made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Sachin Kamat 提交于
Local variables used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Sachin Kamat 提交于
The contents of this header file are not referenced in the driver. Remove its inclusion. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
The arm_big_little cpufreq driver is only used by ARM bigLITTLE platforms and hence must depend on CONFIG_BIG_LITTLE. This was highlighted by Russell earlier when he reported this issue: drivers/built-in.o: In function `bL_cpufreq_set_rate': powercap_sys.c:(.text+0x5ed9a0): undefined reference to `bL_switch_request_cb' Reported-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 31 12月, 2013 1 次提交
-
-
由 Rafael J. Wysocki 提交于
If pstate.current_pstate is 0 after the initial intel_pstate_get_cpu_pstates(), this means that we were unable to obtain any useful P-state information and there is no reason to continue, so free memory and return an error in that case. This fixes the following divide error occuring in a nested KVM guest: Intel P-state driver initializing. Intel pstate controlling: cpu 0 cpufreq: __cpufreq_add_dev: ->get() failed divide error: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-0.rc4.git5.1.fc21.x86_64 #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88001ea20000 ti: ffff88001e9bc000 task.ti: ffff88001e9bc000 RIP: 0010:[<ffffffff815c551d>] [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP: 0000:ffff88001ee03e18 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88001a454348 RCX: 0000000000006100 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001ee03e38 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88001ea20000 R11: 0000000000000000 R12: 00000c0a1ea20000 R13: 1ea200001ea20000 R14: ffffffff815c5400 R15: ffff88001a454348 FS: 0000000000000000(0000) GS:ffff88001ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000001c0c000 CR4: 00000000000006f0 Stack: fffffffb1a454390 ffffffff821a4500 ffff88001a454390 0000000000000100 ffff88001ee03ea8 ffffffff81083e9a ffffffff81083e15 ffffffff82d5ed40 ffffffff8258cc60 0000000000000000 ffffffff81ac39de 0000000000000000 Call Trace: <IRQ> [<ffffffff81083e9a>] call_timer_fn+0x8a/0x310 [<ffffffff81083e15>] ? call_timer_fn+0x5/0x310 [<ffffffff815c5400>] ? pid_param_set+0x130/0x130 [<ffffffff81084354>] run_timer_softirq+0x234/0x380 [<ffffffff8107aee4>] __do_softirq+0x104/0x430 [<ffffffff8107b5fd>] irq_exit+0xcd/0xe0 [<ffffffff81770645>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff8176efb2>] apic_timer_interrupt+0x72/0x80 <EOI> [<ffffffff810e15cd>] ? vprintk_emit+0x1dd/0x5e0 [<ffffffff81757719>] printk+0x67/0x69 [<ffffffff815c1493>] __cpufreq_add_dev.isra.13+0x883/0x8d0 [<ffffffff815c14f0>] cpufreq_add_dev+0x10/0x20 [<ffffffff814a14d1>] subsys_interface_register+0xb1/0xf0 [<ffffffff815bf5cf>] cpufreq_register_driver+0x9f/0x210 [<ffffffff81fb19af>] intel_pstate_init+0x27d/0x3be [<ffffffff81761e3e>] ? mutex_unlock+0xe/0x10 [<ffffffff81fb1732>] ? cpufreq_gov_dbs_init+0x12/0x12 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0 [<ffffffff8109dbf5>] ? parse_args+0x225/0x3f0 [<ffffffff81f64193>] kernel_init_freeable+0x1fc/0x287 [<ffffffff81f638d0>] ? do_early_param+0x88/0x88 [<ffffffff8174b530>] ? rest_init+0x150/0x150 [<ffffffff8174b53e>] kernel_init+0xe/0x130 [<ffffffff8176e27c>] ret_from_fork+0x7c/0xb0 [<ffffffff8174b530>] ? rest_init+0x150/0x150 Code: c1 e0 05 48 63 bc 03 10 01 00 00 48 63 83 d0 00 00 00 48 63 d6 48 c1 e2 08 c1 e1 08 4c 63 c2 48 c1 e0 08 48 98 48 c1 e0 08 48 99 <49> f7 f8 48 98 48 0f af f8 48 c1 ff 08 29 f9 89 ca c1 fa 1f 89 RIP [<ffffffff815c551d>] intel_pstate_timer_func+0x11d/0x2b0 RSP <ffff88001ee03e18> ---[ end trace f166110ed22cc37a ]--- Kernel panic - not syncing: Fatal exception in interrupt Reported-and-tested-by: NKashyap Chamarthy <kchamart@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: All applicable <stable@vger.kernel.org>
-
- 29 12月, 2013 2 次提交
-
-
由 Viresh Kumar 提交于
Prevent __cpufreq_add_dev() from overwriting the existing values of user_policy.{min|max|policy|governor} with defaults during resume from system suspend. Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Changelog] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
If cpufreq_policy_restore() returns NULL during system resume, __cpufreq_add_dev() should just fall back to the full initialization instead of returning an error, because that may actually make things work. Moreover, it should not leave stale fallback data behind after it has failed to restore a previously existing policy. This change is based on Viresh Kumar's work. Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
-
- 23 12月, 2013 2 次提交
-
-
由 Mark Brown 提交于
PM_OPP is a helper library used by several of the existing cpufreq drivers. Some of the drivers select this symbol while others depend on it and rely on the architecture to enable it. Make this behaviour more consistent and obvious by having all the drivers select the symbol. This will also allow better build coverage of the affected drivers. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Mark Brown 提交于
The patch currently under review to enable ARM cpufreq drivers for ARM64 which is useful due to the large amount of shared IP between ARM and ARM64 SoCs. However the big.LITTLE switcher relies on an architecture interface to build which is not present on ARM64. Add a dependency until that is resolved. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 22 12月, 2013 4 次提交
-
-
由 Dirk Brandewie 提交于
Remove the periodic P state boost. This code required for some corner case benchmark tests. The calculation of the required P state was incorrect/inaccurate and would not allow P state increase. This was fixed by a combination of commits: 2134ed4d cpufreq / intel_pstate: Change to scale off of max P-state d253d2a5 intel_pstate: Improve accuracy by not truncating until final result References: https://bugzilla.kernel.org/show_bug.cgi?id=64271Reported-by: NDoug Smythies <dsmythies@telus.net> Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dirk Brandewie 提交于
Baytrail requires setting P state and voltage pairs when adjusting the requested P state. Add function for retrieving the valid voltage values and modify *_set_pstate() functions to caluclate the appropriate voltage for the requested P state. Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Jason Baron 提交于
When configuring a default governor (via CONFIG_CPU_FREQ_DEFAULT_*) with the intel_pstate driver, the desired default policy is not properly set. For example, setting 'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' ends up with the 'powersave' policy being set. Fix by configuring the correct default policy, if either 'powersave' or 'performance' are requested. Otherwise, fallback to what the driver originally set via its 'init' routine. Signed-off-by: NJason Baron <jbaron@akamai.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
There are cases where cpufreq_add_dev() may fail for some CPUs during system resume. With the current code we will still have sysfs cpufreq files for those CPUs and struct cpufreq_policy would be already freed for them. Hence any operation on those sysfs files would result in kernel warnings. Example of problems resulting from resume errors (from Bjørn Mork): WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [<ffffffff81380b0e>] dump_stack+0x55/0x76 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac [<ffffffff81122562>] do_dentry_open+0x17c/0x257 [<ffffffff8112267e>] finish_open+0x41/0x4f [<ffffffff81130225>] do_last+0x80c/0x9ba [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42 [<ffffffff81130606>] path_openat+0x233/0x4a1 [<ffffffff81130b7e>] do_filp_open+0x35/0x85 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa [<ffffffff811233a7>] SyS_openat+0xf/0x11 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b To fix this, remove those sysfs files or put the associated kobject in case of such errors. Also, to make it simple, remove the cpufreq sysfs links from all the CPUs (except for the policy->cpu) during suspend, as that operation won't result in a loss of sysfs file permissions and we can create those links during resume just fine. Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-and-tested-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Changelog] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 10 12月, 2013 1 次提交
-
-
由 Matthias Brugger 提交于
The function at32_cpufreq_driver_init was marked as __init but will be called from inside the cpufreq framework. This lead to the following a section mismatch during compilation: WARNING: drivers/built-in.o(.data+0x2448): Section mismatch in reference from the variable at32_driver to the function .init.text:at32_cpufreq_driver_init() The variable at32_driver references the function __init at32_cpufreq_driver_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
- 08 12月, 2013 2 次提交
-
-
由 Rafael J. Wysocki 提交于
Commit 2167e239 (cpufreq: fix garbage kobjects on errors during suspend/resume) breaks suspend/resume on Martin Ziegler's system (hard lockup during resume), so revert it. Fixes: 2167e239 (cpufreq: fix garbage kobjects on errors during suspend/resume) References: https://bugzilla.kernel.org/show_bug.cgi?id=66751Reported-by: NMartin Ziegler <ziegler@uni-freiburg.de> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Commit 5a87182a (cpufreq: suspend governors on system suspend/hibernate) causes hibernation problems to happen on Bjørn Mork's and Paul Bolle's systems, so revert it. Fixes: 5a87182a (cpufreq: suspend governors on system suspend/hibernate) Reported-by: NBjørn Mork <bjorn@mork.no> Reported-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 12月, 2013 2 次提交
-
-
由 Paul Walmsley 提交于
Treat both negative and zero return values from clk_round_rate() as errors. This is needed since subsequent patches will convert clk_round_rate()'s return value to be an unsigned type, rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Eventually, when calling clk_round_rate(), only a return value of zero will be considered a error. All other values will be considered valid rates. The comparison against values less than 0 is kept to preserve the correct behavior in the meantime. Signed-off-by: NPaul Walmsley <pwalmsley@nvidia.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Paul Walmsley 提交于
Treat both negative and zero return values from clk_round_rate() as errors. This is needed since subsequent patches will convert clk_round_rate()'s return value to be an unsigned type, rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Eventually, when calling clk_round_rate(), only a return value of zero will be considered a error. All other values will be considered valid rates. The comparison against values less than 0 is kept to preserve the correct behavior in the meantime. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 03 12月, 2013 1 次提交
-
-
由 Bjørn Mork 提交于
This is effectively a revert of commit 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume"), which enabled suspend/resume optimizations leaving the sysfs files in place. Errors during suspend/resume are not handled properly, leaving dead sysfs attributes in case of failures. There are are number of functions with special code for the "frozen" case, and all these need to also have special error handling. The problem is easy to demonstrate by making cpufreq_driver->init() or cpufreq_driver->get() fail during resume. The code is too complex for a simple fix, with split code paths in multiple blocks within a number of functions. It is therefore best to revert the patch enabling this code until the error handling is in place. Examples of problems resulting from resume errors: WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [<ffffffff81380b0e>] dump_stack+0x55/0x76 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac [<ffffffff81122562>] do_dentry_open+0x17c/0x257 [<ffffffff8112267e>] finish_open+0x41/0x4f [<ffffffff81130225>] do_last+0x80c/0x9ba [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42 [<ffffffff81130606>] path_openat+0x233/0x4a1 [<ffffffff81130b7e>] do_filp_open+0x35/0x85 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa [<ffffffff811233a7>] SyS_openat+0xf/0x11 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b The failure to restore cpufreq devices on cancelled hibernation is not a new bug. It is caused by the ACPI _PPC call failing unless the hibernate is completed. This makes the acpi_cpufreq driver fail its init. Previously, the cpufreq device could be restored by offlining the cpu temporarily. And as a complete hibernation cycle would do this, it would be automatically restored most of the time. But after commit 5302c3fb the leftover sysfs attributes will block any device add action. Therefore offlining and onlining CPU 1 will no longer restore the cpufreq object, and a complete suspend/resume cycle will replace it with garbage. Fixes: 5302c3fb ("cpufreq: Perform light-weight init/teardown during suspend/resume") Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 28 11月, 2013 1 次提交
-
-
由 Viresh Kumar 提交于
This patch adds cpufreq suspend/resume calls to dpm_{suspend|resume}_noirq() for handling suspend/resume of cpufreq governors. Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found anr issue where tunables configuration for clusters/sockets with non-boot CPUs was getting lost after suspend/resume, as we were notifying governors with CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that policy and so deallocating memory for tunables. This is fixed by this patch as we don't allow any operation on governors after device suspend and before device resume now. Reported-and-tested-by: NLan Tianyu <tianyu.lan@intel.com> Reported-by: NJinhyuk Choi <jinchoi@broadcom.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> [rjw: Changelog, minor cleanups] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 21 11月, 2013 2 次提交
-
-
由 Sachin Kamat 提交于
The init functions are linked statically (no support for dynamic loading) and have no other users. Hence remove EXPORT_SYMBOL for these functions. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Stephen Warren 提交于
d4019f0a "cpufreq: move freq change notifications to cpufreq core" added code to the cpufreq core to print an error if a cpufreq driver's .target() function returned an error. This exposed the fact that Tegra's cpufreq driver returns an error when it is ignoring requests due to the system being suspended. Modify Tegra's .target() function not to return an error in this case; this prevents the error prints. The argument is that since the suspend hook can't and doesn't inform the cpufreq core when its requests will be ignored, there's no way for the cpufreq core to squelch them, so it's not an error for the requests to keep coming. This change make the Tegra driver consistent with how the Exynos handles the same situation. Note that s5pv210-cpufreq.c probably suffers from this same issue though. Fixes: d4019f0a (cpufreq: move freq change notifications to cpufreq core) Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 16 11月, 2013 1 次提交
-
-
由 lan,Tianyu 提交于
The related code has been changed and the comment is out of date. So remove it. Signed-off-by: NLan Tianyu <tianyu.lan@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 14 11月, 2013 1 次提交
-
-
由 viresh kumar 提交于
With a recent change "d4019f0a cpufreq: move freq change notifications to cpufreq core" few variables (r & ret) are removed by mistake and hence these warnings: drivers/cpufreq/omap-cpufreq.c: In function omap_target: drivers/cpufreq/omap-cpufreq.c:64:2: error: ret undeclared (first use in this function) drivers/cpufreq/omap-cpufreq.c:64:2: note: each undeclared identifier is reported only once for each function it appears in drivers/cpufreq/omap-cpufreq.c:94:3: error: r undeclared (first use in this function) drivers/cpufreq/omap-cpufreq.c:116:1: warning: control reaches end of non-void function [-Wreturn-type] Lets fix them by declaring those variables again. Fixes: d4019f0a (cpufreq: move freq change notifications to cpufreq core) Reported-by: NSebastian Capella <sebastian.capella@linaro.org> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 13 11月, 2013 1 次提交
-
-
由 Xiaoguang Chen 提交于
When requested_freq is over policy->max, set it to policy->max. This can help to speed up decreasing frequency. Signed-off-by: NXiaoguang Chen <chenxg@marvell.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 08 11月, 2013 1 次提交
-
-
由 Xiaoguang Chen 提交于
When decreasing frequency, requested_freq may be less than freq_target, So requested_freq minus freq_target may be negative, But reqested_freq's unit is unsigned int, then the negative result will be one larger interger which may be even higher than requested_freq. This patch is to fix such issue. when result becomes negative, set requested_freq as the min value of policy. Signed-off-by: NXiaoguang Chen <chenxg@marvell.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 11月, 2013 1 次提交
-
-
由 Adrian Huang 提交于
Do not load the Intel pstate driver if the platform firmware (ACPI BIOS) supports the power management alternatives. The ACPI BIOS indicates that the OS control mode can be used if the _PSS (Performance Supported States) is defined in ACPI table. For the OS control mode, the Intel pstate driver will be loaded. HP BIOS has several power management modes (firmware, OS-control and so on). For the OS control mode in HP BIOS, the Intel p-state driver will be loaded. When the customer chooses the firmware power management in HP BIOS, the Intel p-state driver will be ignored. I put hw_vendor_info vendor_info in case other vendors (Dell, Lenovo...) have their firmware power management. Vendors should make sure their firmware power management works properly, and they can go for adding their vendor info to the variable. I have verified the patch on HP ProLiant servers. The patch worked correctly. Signed-off-by: NAdrian Huang <adrianhuang0701@gmail.com> [rjw: Fixed up !CONFIG_ACPI build] [Linda Knippers: As Adrian has recently left HP, I retested the updated patch on an HP ProLiant server and verified that it is behaving correctly. When the BIOS is configured for OS control for power management, the intel_pstate driver loads as expected. When the BIOS is configured to provide the power management, the intel_pstate driver does not load and we get the pcc_cpufreq driver instead.] Signed-off-by: NLinda Knippers <linda.knippers@hp.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 01 11月, 2013 1 次提交
-
-
由 Stratos Karafotis 提交于
After commit dfa5bb62 (cpufreq: ondemand: Change the calculation of target frequency), this return statement is no longer needed. Reported-by: NHenrik Nilsson <Karl.Henrik.Nilsson@gmail.com> Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 31 10月, 2013 5 次提交
-
-
由 Viresh Kumar 提交于
Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NRussell King <linux@arm.linux.org.uk> Acked-by: NStephen Warren <swarren@nvidia.com> Tested-by: NAndrew Lunn <andrew@lunn.ch> Tested-by: NNicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: NLan Tianyu <tianyu.lan@intel.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
There are few special cases like exynos5440 which doesn't send POSTCHANGE notification from their ->target() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. From which they finally send POSTCHANGE notification. Its better if we distinguish them from other cpufreq drivers in some way so that core can handle them specially. So this patch introduces another flag: CPUFREQ_ASYNC_NOTIFICATION, which will be set by such drivers. This also changes exynos5440-cpufreq.c and powernow-k8 in order to set this flag. Acked-by: NAmit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dirk Brandewie 提交于
Fixes warnings reported by kbuild test robot sparse warnings: (new ones prefixed by >>) drivers/cpufreq/intel_pstate.c:729:6: sparse: symbol 'copy_pid_params' was not declared. Should it be static? drivers/cpufreq/intel_pstate.c:739:6: sparse: symbol 'copy_cpu_funcs' was not declared. Should it be static? Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Nicolas Pitre 提交于
The b.L switcher can be turned on/off at run time. It is therefore necessary to change the cpufreq driver behavior accordingly. The driver must be unregistered/registered with the cpufreq core to reconfigure freq tables for the virtual or actual CPUs. This is accomplished via the b.L switcher notifier callback. Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
This patch adds IKS (In Kernel Switcher) support to cpufreq driver. This creates a combined freq table for A7-A15 CPU pairs. A7 frequencies are virtualized and scaled down to half the actual frequencies to approximate a linear scale across the combined A7+A15 range. When the requested frequency change crosses the A7-A15 boundary a cluster switch is invoked. Based on earlier work from Sudeep KarkadaNagesha. Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 30 10月, 2013 1 次提交
-
-
由 Sudeep KarkadaNagesha 提交于
The TC2(i.e. CA15_A7) Versatile Express has external Cortex M3 based power controller which is responsible for CPU DVFS and SPC provides the interface for the same. This patch adds a tiny interface driver to check if OPPs are initialised by SPC platform code and register the arm_big_little cpufreq driver. Signed-off-by: NSudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 26 10月, 2013 6 次提交
-
-
由 viresh kumar 提交于
We have per-CPU cpu_policy_rwsem for cpufreq core, but we never use all of them. We always use rwsem of policy->cpu and so we can actually make this rwsem per policy instead. This patch does this change. With this change other tricky situations are also avoided now, like which lock to take while we are changing policy->cpu, etc. Suggested-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dirk Brandewie 提交于
Add support for the Baytrail processor. Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Dirk Brandewie 提交于
Non-core processors have a different MSR layout to commumicate P state information. Refactor the driver to use CPU dependent accessors to P state information. Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NRussell King <linux@arm.linux.org.uk> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rjw@rjwysocki.net>
-
由 Nishanth Menon 提交于
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp.h to pm_opp.h Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Nishanth Menon 提交于
Since Operating Performance Points (OPP) data structures are specific to device specific power management, be specific and rename opp_* data structures in OPP library with dev_pm_opp_* equivalent. Affected structures are: struct opp enum opp_event Minor checkpatch warning resulting of this change was fixed as well. Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-