- 30 6月, 2006 1 次提交
-
-
由 Russell King 提交于
On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 6月, 2006 25 次提交
-
-
由 Jürgen Schindele 提交于
Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: NJrgen Schindele <linux@schindele.name> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The bootloader on the LogicPD PXA270 platform informs the kernel of which type of TFT screen is connected via an lcd=$FOO kernel command line parameter. Before this patch, we ignored this parameter and just hardcoded the use of the Sharp lq64d343 display kit. This patch implement parsing of the command line option, and chooses the right pxafb_mach_info to use (six choices) based on this command line option. Also fix the fb settings to correspond with those of the bootloader. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The "id(wb)BRR" suffix reports which CPU debugging options were (or were not) selected at kernel build time. Rather than have every proc-*.S file implement this, report the control register value, from which this information can be deduced. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The code in "1007:" is in the .fixup section, which in the mmuless case is discarded. Since this code is referenced from the .text section, it causes an link error. Move this code into the .text section instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hyok S. Choi 提交于
In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Hyok says Intel Xscale is not currently supported by uCLinux. Rather than adding #error statements to the Xscale support files and causing !MMU+Xscale configurations to fail to build, prevent Xscale-based machines from being selected in !MMU mode. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hyok S. Choi 提交于
This is a trivial patch to export flush_dcache_page in mm/nommu.c. Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove fault-armv.o, mmap.o and mm-armv.o from uclinux builds - these are concerned with MMU-ful operations, and as such are redundant for uclinux. Since this also removes iotable_init() and iotable_init() is used extensively in the platform support files, just make it a no-op. Based upon a couple of patches by Hyok. Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
TABLE_SIZE is never used in arch/arm/mm/init.c. create_memmap_holes(), memtable_init, and setup_io_desc() no longer exist in the kernel. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
nommu doesn't require a complex flush_dcache_page implementation like the MMU-ful CPUs do, so provide a simplified version in nommu.c and omit flush.c from the build as appropriate. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hyok S. Choi 提交于
Include Kconfig-nommu when MMU is not selected. (This is part of a patch from Hyok.) Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
nommu doesn't have any form of remapping support, so ioremap, etc become stubs which just return the casted address, doing nothing else. Move ioport_map(), ioport_unmap(), pci_iomap(), pci_iounmap() into a separate file which is always built. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hyok S. Choi 提交于
Since uclinux doesn't make use of the TLB, including the TLB maintainence and CPU-optimised copypage functions does not make sense. Remove them. (This is part of one of Hyok's patches.) Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
MMUless systems have only one address space for all threads, so both the usual access_ok() checks, and the exception handling do not make much sense. Hence, discard the fixup and exception tables at link time, use memcpy/memset for the user copy/clearing functions, and define the permission check macros to be constants. Some of this patch was derived from the equivalent patch by Hyok S. Choi. Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Since there can be no fixed location for the TLS value with nommu systems, we must provide TLS register emulation in order to support TLS binaries on CPUs without the thread register. Part of a patch from Hyok S. Choi, and cleaned up by rmk. Signed-off-by: NHyok S. Choi <hyok.choi@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Guennadi Liakhovetski 提交于
Patch from Guennadi Liakhovetski Currently probe_irq_on() on PXA will silently reconfigure all output GPIOs, that are not configured as alternate functions, for input. Avoid that. Upon CPU reset all GPIOs are configured as inputs, so, if a GPIO is configured as output, it has been done so intentionally. Signed-off-by: NG. Liakhovetski <gl@dsa-ac.de> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch makes it possible to get/set a task's Crunch state via the ptrace(2) system call. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch makes the kernel save Crunch state in userland signal frames, so that any userland signal handler can safely use the Crunch coprocessor without corrupting the Crunch state of the code it preempted. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The S3C2440 and S3C2442 have an extended USB gadget controller, so re-name the platform device to inform the driver that it needs to change some parameters Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Back in the days when we had armo (26-bit) and armv (32-bit) combined, we had an additional layer to the uaccess macros to ensure correct typing. Since we no longer have 26-bit in this tree, we no longer need this layer, so eliminate it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 6月, 2006 1 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
With Goto-san's patch, we can add new pgdat/node at runtime. I'm now considering node-hot-add with cpu + memory on ACPI. I found acpi container, which describes node, could evaluate cpu before memory. This means cpu-hot-add occurs before memory hot add. In most part, cpu-hot-add doesn't depend on node hot add. But register_cpu(), which creates symbolic link from node to cpu, requires that node should be onlined before register_cpu(). When a node is onlined, its pgdat should be there. This patch-set holds off creating symbolic link from node to cpu until node is onlined. This removes node arguments from register_cpu(). Now, register_cpu() requires 'struct node' as its argument. But the array of struct node is now unified in driver/base/node.c now (By Goto's node hotplug patch). We can get struct node in generic way. So, this argument is not necessary now. This patch also guarantees add cpu under node only when node is onlined. It is necessary for node-hot-add vs. cpu-hot-add patch following this. Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard to its 'struct node *root' argument. This patch removes it. Also modify callers of register_cpu()/unregister_cpu, whose args are changed by register-cpu-remove-node-struct patch. [Brice.Goglin@ens-lyon.org: fix it] Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 13 次提交
-
-
由 Tony Lindgren 提交于
Multiplexing for 24xx GPMC wait pin monitoring Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
MT_MEMORY is needed in order to execute code in SRAM. Also need to use section mapping. Based on a patch by Richard Woodruff. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Timo Teras 提交于
- Initialize timer outside of spinlock to reduce the time the spinlock is held - Do clk_get to the source clocks during initialization to avoid sleeping later - New function to set counter register Signed-off-by: NTimo Teras <timo.teras@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
Since the mutex protecting the clock list is static, the list itself should be too. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Mux updates for external DMA and GPIO. GPIO updates by Igor Stoppa. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
This patch adds support for omap24xx power domains and allows suspend to work. Please note that for some reason core power domain still does not seem to idle. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Update cpufreq support for 24xx Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
Implement basic support for General-Purpose Memory Controller as found on OMAP2420. Dynamic CS address space allocation still needs to be done. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
- DMA CSR register is cleared by reading on omap1, but on omap2 it is cleard by writing to it. - DMA TOUT interrupt does not exist on omap24xx, rename it - Add SECURE and MISALIGNED errors by default for omap24xx - Add defines for external DMA request lines Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kyungmin Park 提交于
OMAP2 DMA burst setting support Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Timo Teras 提交于
The dmtimer framework update broke 32 kHz timer as udelay() does not work before system timer is started (and GPT1 should not be reset). This also makes the GP timer use GPT1. This requires a fix in clock framework. Signed-off-by: NTimo Teras <timo.teras@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Timo Teras 提交于
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: NTimo Teras <timo.teras@solidboot.com> Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-