Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 12月, 2009 2 次提交
    • H
      x86: Regex support and known-movable symbols for relocs, fix _end · 873b5271
      由 H. Peter Anvin 提交于 
      This adds a new category of symbols to the relocs program: symbols
which are known to be relative, even though the linker emits them as
absolute; this is the case for symbols that live in the linker script,
which currently applies to _end.

Unfortunately the previous workaround of putting _end in its own empty
section was defeated by newer binutils, which remove empty sections
completely.

This patch also changes the symbol matching to use regular expressions
instead of hardcoded C for specific patterns.

This is a decidedly non-minimal patch: a modified version of the
relocs program is used as part of the Syslinux build, and this 	is
basically a backport to Linux of some of those changes; they have
thus been well tested.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4AF86211.3070103@zytor.com>
Acked-by: NMichal Marek <mmarek@suse.cz>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
      873b5271
    • H
      x86, msr: Remove incorrect, duplicated code in the MSR driver · 494c2ebf
      由 H. Peter Anvin 提交于 
      The MSR driver would compute the values for cpu and c at declaration,
and then again in the body of the function.  This isn't merely
redundant, but unsafe, since cpu might not refer to a valid CPU at
that point.

Remove the unnecessary and dangerous references in the declarations.
This code now matches the equivalent code in the CPUID driver.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      494c2ebf
  3. 14 12月, 2009 5 次提交
  5. 13 12月, 2009 1 次提交
  7. 12 12月, 2009 3 次提交
    • M
      x86: Limit the number of processor bootup messages · 2eaad1fd
      由 Mike Travis 提交于 
      When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.

This set of patches limits the number of repetitious messages
which contain no additional information.  Much of this information
is obtainable from the /proc and /sysfs.   Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.

The new cpu bootup sequence for system_state == SYSTEM_BOOTING:

Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
...
Booting Node   3, Processors  #56 #57 #58 #59 #60 #61 #62 #63 Ok.
Brought up 64 CPUs

After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:

    Booting Node %d Processor %d APIC 0x%x

Status of the following lines:

    CPU: Physical Processor ID:		printed once (for boot cpu)
    CPU: Processor Core ID:		printed once (for boot cpu)
    CPU: Hyper-Threading is disabled	printed once (for boot cpu)
    CPU: Thermal monitoring enabled	printed once (for boot cpu)
    CPU %d/0x%x -> Node %d:		removed
    CPU %d is now offline:		only if system_state == RUNNING
    Initializing CPU#%d:		KERN_DEBUG
Signed-off-by: NMike Travis <travis@sgi.com>
LKML-Reference: <4B219E28.8080601@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      2eaad1fd
    • M
      x86: Remove enabling x2apic message for every CPU · 450b1e8d
      由 Mike Travis 提交于 
      Print only once that the system is supporting x2apic mode.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4B226E92.5080904@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      450b1e8d
    • B
      x86, msr: Add support for non-contiguous cpumasks · 50542251
      由 Borislav Petkov 提交于 
      The current rd/wrmsr_on_cpus helpers assume that the supplied
cpumasks are contiguous. However, there are machines out there
like some K8 multinode Opterons which have a non-contiguous core
enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see
http://www.gossamer-threads.com/lists/linux/kernel/1160268.

This patch fixes out-of-bounds writes (see URL above) by adding per-CPU
msr structs which are used on the respective cores.

Additionally, two helpers, msrs_{alloc,free}, are provided for use by
the callers of the MSR accessors.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091211171440.GD31998@aftab>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      50542251
  9. 11 12月, 2009 2 次提交
    • Y
      x86: Use find_e820() instead of hard coded trampoline address · 893f38d1
      由 Yinghai Lu 提交于 
      Jens found the following crash/regression:

[    0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page

and

[    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE

and bisected it to b24c2a92 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").

It turns out the BIOS is using the first 64k for mptable,
without reserving it.

So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.
Reported-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Tested-by: NJens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      893f38d1
    • P
      x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks · ebb682f5
      由 Prarit Bhargava 提交于 
      The per_cpu cpuid4_info shared_map can contain stale data when CPUs are added
and removed.

The stale data can lead to a NULL pointer derefernce panic on a remove of a
CPU that has had siblings previously removed.

This patch resolves the panic by verifying a cpu is actually online before
adding it to the shared_cpu_map, only examining cpus that are part of
the same lower level cache, and by updating other siblings lowest level cache
maps when a cpu is added.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
LKML-Reference: <20091209183336.17855.98708.sendpatchset@prarit.bos.redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      ebb682f5
  11. 10 12月, 2009 8 次提交
  13. 09 12月, 2009 13 次提交
  15. 08 12月, 2009 4 次提交
  17. 07 12月, 2009 2 次提交