* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: clean up multiple crtc handling for evergreen+ (v2)

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C2440: fix section mismatch on mini2440
  ARM: S3C24XX: drop return codes in void function of dma.c
  ARM: S3C24XX: don't use uninitialized variable in dma.c
  ARM: EXYNOS4: Set appropriate I2C device variant
  ARM: S5PC100: Fix for compilation error
  spi/s3c64xx: Bug fix for SPI with different FIFO level
  ARM: SAMSUNG: Add tx_st_done variable
  ARM: EXYNOS4: Address a section mismatch w/ suspend issue.
  ARM: S5P: Fix bug on init of PWMTimers for HRTimer
  ARM: SAMSUNG: header file revised to prevent declaring duplicated
  ARM: EXYNOS4: fix improper gpio configuration
  ARM: EXYNOS4: Fix card detection for sdhci 0 and 2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: max8997: Fix setting inappropriate value for ramp_delay variable
  regulator: db8500-prcmu: small fixes
  regulator: max8997: remove dependency on platform_data pointer
  regulator: MAX8997: Fix for divide by zero error
  regulator: max8952 - fix wrong gpio valid check

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  btrfs: fix oops when doing space balance
  Btrfs: don't panic if we get an error while balancing V2
  btrfs: add missing options displayed in mount output

Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver handles the variants pca9530-pca9533, so it chose the name
"pca953x".  However, there is a gpio driver which decided on the same
name.  As a result, those two can't be loaded at the same time.  Add a
subsystem prefix to make the driver name unique.  Device matching will not
suffer, because both are I2C drivers which match using a
i2c_device_id-table which is not altered.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remap_pfn_range() means map physical address pfn<<PAGE_SHIFT to user addr.

For nommu arch it's implemented by vma->vm_start = pfn << PAGE_SHIFT which
is wrong acroding the original meaning of this function.  And some driver
developer using remap_pfn_range() with correct parameter will get
unexpected result because vm_start is changed.  It should be implementd
like addr = pfn << PAGE_SHIFT but which is meanless on nommu arch, this
patch just make it simply return.

Parameter name and setting of vma->vm_flags also be fixed.
Signed-off-by: NBob Liu <lliubbo@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a regression in 3.0 reported by Paul Parsons regarding the
removal of the msleep(1) in the ds1wm_reset() function:

: The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying"
: error messages on an HP iPAQ hx4700 PDA (XScale-PXA270):
:
: <snip>
: Driver for 1-wire Dallas network protocol.
: DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
: 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
: ds1wm ds1wm: pass: 1 bus error, retrying
: ds1wm ds1wm: pass: 2 bus error, retrying
: ds1wm ds1wm: pass: 3 bus error, retrying
: ds1wm ds1wm: pass: 4 bus error, retrying
: ds1wm ds1wm: pass: 5 bus error, retrying
: ...
:
: The visible result is that the battery charging LED is erratic; sometimes
: it works, mostly it doesn't.
:
: The linux-2.6.39 DS1WM 1-wire driver worked OK.  I haven't tried 3.0-rc1,
: 3.0-rc2, or 3.0-rc3.

This sleep should not be required on normal circuitry provided the
pull-ups on the bus are correctly adapted to the slaves.  Unfortunately,
this is not always the case.  The sleep is restored but as a parameter to
the probe function in the pdata.

[akpm@linux-foundation.org: coding-style fixes]
Reported-by: NPaul Parsons <lost.distance@yahoo.com>
Tested-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NJean-François Dagenais <dagenaisj@sonatest.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 889976db ("memcg: reclaim memory from nodes in round-robin
order") adds an numa node round-robin for memcg.  But the information is
updated once per 10sec.

This patch changes the update trigger from jiffies to memcg's event count.
 After this patch, numa scan information will be updated when we see 1024
events of pagein/pageout under a memcg.

[akpm@linux-foundation.org: attempt to repair code layout]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, in mem_cgroup_hierarchical_reclaim(), mem_cgroup_local_usage() is
used for checking whether the memcg contains reclaimable pages or not.  If
no pages in it, the routine skips it.

But, mem_cgroup_local_usage() contains Unevictable pages and cannot handle
"noswap" condition correctly.  This doesn't work on a swapless system.

This patch adds test_mem_cgroup_reclaimable() and replaces
mem_cgroup_local_usage().  test_mem_cgroup_reclaimable() see LRU counter
and returns correct answer to the caller.  And this new function has
"noswap" argument and can see only FILE LRU if necessary.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix kerneldoc layout]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__tlb_remove_page() switches to a new batch page, but still checks space
in the old batch.  This check always fails, and causes a forced tlb flush.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.  Unfortunately, if the highest zone is small, a
problem occurs.

When balance_pgdat() returns, it may be at a lower classzone_idx than it
started because the highest zone was unreclaimable.  Before checking if it
should go to sleep though, it checks pgdat->classzone_idx which when there
is no other activity will be MAX_NR_ZONES-1.  It interprets this as it has
been woken up while reclaiming, skips scheduling and reclaims again.  As
there is no useful reclaim work to do, it enters into a loop of shrinking
slab consuming loads of CPU until the highest zone becomes reclaimable for
a long period of time.

There are two problems here.  1) If the returned classzone or order is
lower, it'll continue reclaiming without scheduling.  2) if the highest
zone was marked unreclaimable but balance_pgdat() returns immediately at
DEF_PRIORITY, the new lower classzone is not communicated back to kswapd()
for sleeping.

This patch does two things that are related.  If the end_zone is
unreclaimable, this information is communicated back.  Second, if the
classzone or order was reduced due to failing to reclaim, new information
is not read from pgdat and instead an attempt is made to go to sleep.  Due
to this, it is also necessary that pgdat->classzone_idx be initialised
each time to pgdat->nr_zones - 1 to avoid re-reads being interpreted as
wakeups.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NAndrew Lutomirski <luto@mit.edu>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When deciding if kswapd is sleeping prematurely, the classzone is taken
into account but this is different to what balance_pgdat() and the
allocator are doing.  Specifically, the DMA zone will be checked based on
the classzone used when waking kswapd which could be for a GFP_KERNEL or
GFP_HIGHMEM request.  The lowmem reserve limit kicks in, the watermark is
not met and kswapd thinks it's sleeping prematurely keeping kswapd awake in
error.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NAndrew Lutomirski <luto@mit.edu>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.

When kswapd applies pressure to zones during node balancing, it checks if
the zone is above a high+balance_gap threshold.  If it is, it does not
apply pressure but it unconditionally shrinks slab on a global basis which
is excessive.  In the event kswapd is being kept awake due to a high small
unreclaimable zone, it skips zone shrinking but still calls shrink_slab().

Once pressure has been applied, the check for zone being unreclaimable is
being made before the check is made if all_unreclaimable should be set.
This miss of unreclaimable can cause has_under_min_watermark_zone to be
set due to an unreclaimable zone preventing kswapd backing off on
congestion_wait().
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NAndrew Lutomirski <luto@mit.edu>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.  Unfortunately, if the highest zone is small, a
problem occurs.

This seems to happen most with recent sandybridge laptops but it's
probably a co-incidence as some of these laptops just happen to have a
small Normal zone.  The reproduction case is almost always during copying
large files that kswapd pegs at 100% CPU until the file is deleted or
cache is dropped.

The problem is mostly down to sleeping_prematurely() keeping kswapd awake
when the highest zone is small and unreclaimable and compounded by the
fact we shrink slabs even when not shrinking zones causing a lot of time
to be spent in shrinkers and a lot of memory to be reclaimed.

Patch 1 corrects sleeping_prematurely to check the zones matching
	the classzone_idx instead of all zones.

Patch 2 avoids shrinking slab when we are not shrinking a zone.

Patch 3 notes that sleeping_prematurely is checking lower zones against
	a high classzone which is not what allocators or balance_pgdat()
	is doing leading to an artifical belief that kswapd should be
	still awake.

Patch 4 notes that when balance_pgdat() gives up on a high zone that the
	decision is not communicated to sleeping_prematurely()

This problem affects 2.6.38.8 for certain and is expected to affect 2.6.39
and 3.0-rc4 as well.  If accepted, they need to go to -stable to be picked
up by distros and this series is against 3.0-rc4.  I've cc'd people that
reported similar problems recently to see if they still suffer from the
problem and if this fixes it.

This patch: correct the check for kswapd sleeping in sleeping_prematurely()

During allocator-intensive workloads, kswapd will be woken frequently
causing free memory to oscillate between the high and min watermark.  This
is expected behaviour.

A problem occurs if the highest zone is small.  balance_pgdat() only
considers unreclaimable zones when priority is DEF_PRIORITY but
sleeping_prematurely considers all zones.  It's possible for this sequence
to occur

  1. kswapd wakes up and enters balance_pgdat()
  2. At DEF_PRIORITY, marks highest zone unreclaimable
  3. At DEF_PRIORITY-1, ignores highest zone setting end_zone
  4. At DEF_PRIORITY-1, calls shrink_slab freeing memory from
        highest zone, clearing all_unreclaimable. Highest zone
        is still unbalanced
  5. kswapd returns and calls sleeping_prematurely
  6. sleeping_prematurely looks at *all* zones, not just the ones
     being considered by balance_pgdat. The highest small zone
     has all_unreclaimable cleared but the zone is not
     balanced. all_zones_ok is false so kswapd stays awake

This patch corrects the behaviour of sleeping_prematurely to check the
zones balance_pgdat() checked.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NPádraig Brady <P@draigBrady.com>
Tested-by: NAndrew Lutomirski <luto@mit.edu>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ramp_delay variable can be set lower than the desired value.
This patch fixes it.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungMin Park <kyungmin.park@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Small cleanups for better readability.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

The platform_data (pdata) may be pointing to __initdata section, which
may be free'd from the memory. The dependency on pdata in non-init
functions is removed in this patch to allow platform to declare
__initdata for platform data.
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Currently, ramp_delay variable is used uninitialzed in
max8997_set_voltage_ldobuck which gets called through
regulator_register calls.

To fix the problem, in max8997_pmic_probe, ramp_delay initialization
code is moved before calls to regulator_register.

Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Acked-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Acked-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

evergreen+ asics have 2-6 crtcs.  Don't access crtc registers
for crtc regs that don't exist as they have very high latency
and may cause problems on some asics.  The previous code missed
a few cases and was not fine grained enough (missed the 4 crtc
case for example).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=38800

v2: fix typo noticed by Chris Bandy <cbandy@jbandy.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Reviewed-by: NMichel Dänzer <michel@daenzer.net>
Tested-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio/langwell_gpio: ack the correct bit for langwell gpio interrupts

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: unpin stale inodes directly in IOP_COMMITTED

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: drop __initdata tags from static struct platform_device declarations

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/kms: allow drm_mode_group with no objects
  drm/radeon/kms: free ib pool on module unloading
  drm/radeon/kms: fix typo in evergreen disp int status register
  drm/radeon/kms: fix typo in IH_CNTL swap bitfield

The wrong bit was masked when acking langwell gpio interrupts.

Reason for maskig the wrong bit was probably because__ffs() and ffs() functions
return bit indexes differently (0..31 vs 1..32)

This fixes langwell based devices from hanging when a gpio interrupt is
triggered and undoes the breakage which occurred in change set
732063b9Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

If mini2440_init() is in __init, mini2440_parse_features() should also
be in __init. Fixes:

(.text+0x9adc): Section mismatch in reference from the function mini2440_parse_features.clone.0() to the
(unknown reference) .init.data:(unknown)
The function mini2440_parse_features.clone.0() references the (unknown reference) __initdata (unknown).
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Michel Pollet <buserror@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit bb072c3c (ARM / Samsung: Use struct syscore_ops for "core" power
management) turned s3c2410_dma_resume_chan() from int to void. So, drop
the actual return values, too. Fixes:

arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_resume_chan':
arch/arm/plat-s3c24xx/dma.c:1238:3: warning: 'return' with a value, in function returning void
arch/arm/plat-s3c24xx/dma.c:1250:2: warning: 'return' with a value, in function returning void
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit 8970ef47 (S3C24XX: Remove hardware specific registers from DMA
calls) removed the parameter dcon in s3c2410_dma_config() and calculates
it on its own. So the debug-output for the old parameter can go, too.
Fixes:

arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_config':
arch/arm/plat-s3c24xx/dma.c:1030:2: warning: 'dcon' is used uninitialized in this function
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

* 'for-30-rc5/all-i2c' of git://git.fluff.org/bjdooks/linux:
  i2c-bfin-twi: abort transfer is MEM bit is reset unexpectedly
  i2c-s3c2410: Remove useless break code
  i2c-s3c2410: Fix typo 'i2s' -> 'i2c'
  i2c: tegra: Assign unused slave address

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: additional regression fix for device removal

Commit e534c5b8 (USB: fix regression
occurring during device removal) didn't go far enough.  It failed to
take into account that when a driver claims multiple interfaces, it may
release them all at the same time.  As a result, some interfaces can
get released before they are unregistered, and we deadlock trying to
acquire the bandwidth_mutex that we already own.

This patch (asl478) handles this case by setting the "unregistering"
flag on all the interfaces before removing any of them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Tested-by: NÉric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Fix free_unnecessary_pages()

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: we should write meta data updates with FLUSH FUA
  drbd: fix limit define, we support 1 PiByte now
  drbd: when receive times out on meta socket, also check last receive time on data socket
  drbd: account bitmap IO during resync as resync-(related-)-io
  drbd: don't cond_resched_lock with IRQs disabled
  drbd: add missing spinlock to bitmap receive
  drbd: Use the correct max_bio_size when creating resync requests
  cfq-iosched: make code consistent
  cfq-iosched: fix a rcu warning

Add an FS-Cache helper to bulk uncache pages on an inode.  This will
only work for the circumstance where the pages in the cache correspond
1:1 with the pages attached to an inode's page cache.

This is required for CIFS and NFS: When disabling inode cookie, we were
returning the cookie and setting cifsi->fscache to NULL but failed to
invalidate any previously mapped pages.  This resulted in "Bad page
state" errors and manifested in other kind of errors when running
fsstress.  Fix it by uncaching mapped pages when we disable the inode
cookie.

This patch should fix the following oops and "Bad page state" errors
seen during fsstress testing.

  ------------[ cut here ]------------
  kernel BUG at fs/cachefiles/namei.c:201!
  invalid opcode: 0000 [#1] SMP
  Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs
  RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  RSP: 0018:ffff88002ce6dd00  EFLAGS: 00010282
  RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282
  RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300
  R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840
  R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0
  FS:  00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0)
  Stack:
   0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00
   ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380
   ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56
  Call Trace:
   cachefiles_lookup_object+0x78/0xd4 [cachefiles]
   fscache_lookup_object+0x131/0x16d [fscache]
   fscache_object_work_func+0x1bc/0x669 [fscache]
   process_one_work+0x186/0x298
   worker_thread+0xda/0x15d
   kthread+0x84/0x8c
   kernel_thread_helper+0x4/0x10
  RIP  cachefiles_walk_to_object+0x436/0x745 [cachefiles]
  ---[ end trace 1d481c9af1804caa ]---

I tested the uncaching by the following means:

 (1) Create a big file on my NFS server (104857600 bytes).

 (2) Read the file into the cache with md5sum on the NFS client.  Look in
     /proc/fs/fscache/stats:

	Pages  : mrk=25601 unc=0

 (3) Open the file for read/write ("bash 5<>/warthog/bigfile").  Look in proc
     again:

	Pages  : mrk=25601 unc=25601
Reported-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NSuresh Jayaraman <sjayaraman@suse.de>
cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Don't use the EFI reboot method by default
  x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup
  x86, reboot: Acer Aspire One A110 reboot quirk
  x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machines

Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: Fix boot crash when kmemleak and debugobjects enabled

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  jump_label: Fix jump_label update for modules
  oprofile, x86: Fix race in nmi handler while starting counters

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Disable (revert) SCHED_LOAD_SCALE increase
  sched, cgroups: Fix MIN_SHARES on 64-bit boxen

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it
  net: refine {udp|tcp|sctp}_mem limits
  vmxnet3: round down # of queues to power of two
  net: sh_eth: fix the parameter for the ETHER of SH7757
  net: sh_eth: fix cannot work half-duplex mode
  net: vlan: enable soft features regardless of underlying device
  vmxnet3: fix starving rx ring whenoc_skb kb fails
  bridge: Always flood broadcast packets
  greth: greth_set_mac_add would corrupt the MAC address.
  net: bind() fix error return on wrong address family
  natsemi: silence dma-debug warnings
  net: 8139too: Initial necessary vlan_features to support vlan
  Fix call trace when interrupts are disabled while sleeping function kzalloc is called
  qlge:Version change to v1.00.00.29
  qlge: Fix printk priority so chip fatal errors are always reported.
  qlge:Fix crash caused by mailbox execution on wedged chip.
  xfrm4: Don't call icmp_send on local error
  ipv4: Don't use ufo handling on later transformed packets
  xfrm: Remove family arg from xfrm_bundle_ok
  ipv6: Don't put artificial limit on routing table size.
  ...

Previously we would check for acpi_sci_override_gsi == gsi every time
a PCI device was enabled. That works during early bootup, but later
on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup.
The reason is that acpi_sci_override_gsi was declared in __initdata and
after early bootup could contain bogus values.

This patch moves the check for acpi_sci_override_gsi to the
site where the ACPI SCI is preset.

CC: stable@kernel.org
Reported-by: NRaghavendra D Prabhu <rprabhu@wnohang.net>
Tested-by: NRaghavendra D Prabhu <rprabhu@wnohang.net>
[http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html]
Suggested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>