* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  spi.h: missing kernel-doc notation, please fix
  of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
  of: Fix missing includes
  ata: update for of_device to platform_device replacement
  microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
  microblaze: Fix of/address: Merge all of the bus translation code
  booting-without-of: Remove nonexistent chapters from TOC, fix numbering

Added comments in kernel-doc notation for previously added struct fields.
Signed-off-by: NErnst Schwab <eschwab@online.de>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  AppArmor: fix task_setrlimit prototype

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  vt,console,kdb: preserve console_blanked while in kdb
  vt: fix regression warnings from KMS merge
  arm,kgdb: fix GDB_MAX_REGS no longer used
  kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c
  kdb: fix compile error without CONFIG_KALLSYMS

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  platform/x86: move rfkill for Dell Mini 1012 to compal-laptop
  thinkpad-acpi: Add KEY_CAMERA (Fn-F6) for Lenovo keyboards
  thinkpad-acpi: add support for model-specific keymaps
  thinkpad-acpi: lock down size of hotkey keymap
  thinkpad-acpi: untangle ACPI/vendor backlight selection
  thinkpad-acpi: find ACPI video device by synthetic HID
  intel_ips: potential null dereference
  drivers/platform/x86: Adjust confusing if indentation
  x86: intel_ips: do not use PCI resources before pci_enable_device()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix false warning saying one of two super blocks is broken
  nilfs2: fix list corruption after ifile creation failure

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Fix a memmove bug in dev_gro_receive()
  net sched: fix some kernel memory leaks
  netfilter: {ip,ip6,arp}_tables: avoid lockdep false positive
  Revert "netlink: netlink_recvmsg() fix"
  ipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mss
  xfrm: Use GFP_ATOMIC in xfrm_compile_policy
  ath5k: disable ASPM L0s for all cards
  ath9k_htc: load proper firmware for device ID 7015
  wl1251: fix trigger scan timeout usage
  ath9k_htc: Fix disconnect issue in HT40 mode.
  ath9k_htc: fix panic on packet injection using airbase-ng tool.
  ipw2100: register pm_qos request before registering pci driver

list_add() corruption messages reported from shmem_fill_super()'s recently
introduced percpu_counter_init(): shmem_put_super() needs to remember to
percpu_counter_destroy().  And also check error from percpu_counter_init().
Reported-bisected-and-tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix atomic64_t routine return values.
  sparc64: Fix rwsem constant bug leading to hangs.
  sparc: Hook up new fanotify and prlimit64 syscalls.
  sparc: Really fix "console=" for serial consoles.

* master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: amba clcd: don't disable an already disabled clock
  ARM: Tighten check for allowable CPSR values
  ARM: 6329/1: wire up sys_accept4() on ARM
  ARM: 6328/1: Build with -fno-dwarf2-cfi-asm
  ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used

Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using a program like the following:

	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/types.h>
	#include <sys/wait.h>

	int main() {
		id_t id;
		siginfo_t infop;
		pid_t res;

		id = fork();
		if (id == 0) { sleep(1); exit(0); }
		kill(id, SIGSTOP);
		alarm(1);
		waitid(P_PID, id, &infop, WCONTINUED);
		return 0;
	}

to call waitid() on a stopped process results in access to the child task's
credentials without the RCU read lock being held - which may be replaced in the
meantime - eliciting the following warning:

	===================================================
	[ INFO: suspicious rcu_dereference_check() usage. ]
	---------------------------------------------------
	kernel/exit.c:1460 invoked rcu_dereference_check() without protection!

	other info that might help us debug this:

	rcu_scheduler_active = 1, debug_locks = 1
	2 locks held by waitid02/22252:
	 #0:  (tasklist_lock){.?.?..}, at: [<ffffffff81061ce5>] do_wait+0xc5/0x310
	 #1:  (&(&sighand->siglock)->rlock){-.-...}, at: [<ffffffff810611da>]
	wait_consider_task+0x19a/0xbe0

	stack backtrace:
	Pid: 22252, comm: waitid02 Not tainted 2.6.35-323cd+ #3
	Call Trace:
	 [<ffffffff81095da4>] lockdep_rcu_dereference+0xa4/0xc0
	 [<ffffffff81061b31>] wait_consider_task+0xaf1/0xbe0
	 [<ffffffff81061d15>] do_wait+0xf5/0x310
	 [<ffffffff810620b6>] sys_waitid+0x86/0x1f0
	 [<ffffffff8105fce0>] ? child_wait_callback+0x0/0x70
	 [<ffffffff81003282>] system_call_fastpath+0x16/0x1b

This is fixed by holding the RCU read lock in wait_task_continued() to ensure
that the task's current credentials aren't destroyed between us reading the
cred pointer and us reading the UID from those credentials.

Furthermore, protect wait_task_stopped() in the same way.

We don't need to keep holding the RCU read lock once we've read the UID from
the credentials as holding the RCU read lock doesn't stop the target task from
changing its creds under us - so the credentials may be outdated immediately
after we've read the pointer, lock or no lock.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

>Xin Xiaohui wrote:
> I looked into the code dev_gro_receive(), found the code here:
> if the frags[0] is pulled to 0, then the page will be released,
> and memmove() frags left.
> Is that right? I'm not sure if memmove do right or not, but
> frags[0].size is never set after memove at least. what I think
> a simple way is not to do anything if we found frags[0].size == 0.
> The patch is as followed.
...

This version of the patch fixes the bug directly in memmove.
Reported-by: N"Xin, Xiaohui" <xiaohui.xin@intel.com>
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Should return 'long' instead of 'int'.

Thanks to Dimitris Michailidis and Tony Luck.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noticed by Linus, it is critical that some of the
rwsem constants be signed.  Yet, hex constants are
unsigned unless explicitly casted or negated.

The most critical one is RWSEM_WAITING_BIAS.

This bug was exacerbated by commit
424acaae ("rwsem: wake queued readers
when writer blocks on active read lock")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We leak at least 32bits of kernel memory to user land in tc dump,
because we dont init all fields (capab ?) of the dumped structure.

Use C99 initializers so that holes and non explicit fields are zeroed.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 24b36f01 (netfilter: {ip,ip6,arp}_tables: dont block
bottom half more than necessary), lockdep can raise a warning
because we attempt to lock a spinlock with BH enabled, while
the same lock is usually locked by another cpu in a softirq context.

Disable again BH to avoid these lockdep warnings.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Diagnosed-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the clock enable/disable tracking in the AMBA CLCD driver so
that the driver doesn't try to disable an already disabled clock,
thereby causing the clock (if shared) to become unbalanced.

This resolves a problem with CLCD on LPC32xx ARM platforms.
Reported-by: NKevin Wells <wellsk40@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The drivers for Xilinx' SystemACE and physically mapped MTDs were missing
prototypes for of_address_to_resource(). This patch adds the necessary
headers.
Signed-off-by: NGraeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch fixes missing includes from a number of .c files because
the code (wrongfully) depended on prom.h including them.  The include
of linux/of_address.h was removed in microblaze prom.h in commit
"of/address: Clean up function declarations" (sha1 id 22ae782f), but
not fixed in some callers.  This patch fixes them up.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NMichal Simek <monstr@monstr.eu>

After rlimits tree was merged we get the following errors:
security/apparmor/lsm.c:663:2: warning: initialization from incompatible pointer type

It is because AppArmor was merged in the meantime, but uses the old
prototype. So fix it by adding struct task_struct as a first parameter
of apparmor_task_setrlimit.

NOTE that this is ONLY a compilation warning fix (and crashes caused
by that). It needs proper handling in AppArmor depending on who is the
'task'.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The only tricky bit is the compat version of fanotify_mark, which
which on 32-bit the 64-bit mark argument is passed in as "high32",
"low32".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Commit b45cfba4 (vt,console,kdb:
implement atomic console enter/leave functions) introduced the ability
to atomically change the console mode with kernel mode setting but did
not preserve the state of the console_blanked variable.

The console_blanked variable must be restored when executing the
con_debug_leave() or further kernel mode set changes (such as using
chvt X) will fail to correctly set the state of console.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
CC: Andrew Morton <akpm@linux-foundation.org>

Fix the following new sparse warnings in vt.c introduced by the commit
b45cfba4 (vt,console,kdb: implement
atomic console enter/leave functions):

drivers/char/vt.c:197:5: warning: symbol 'saved_fg_console' was not declared. Should it be static?
drivers/char/vt.c:198:5: warning: symbol 'saved_last_console' was not declared. Should it be static?
drivers/char/vt.c:199:5: warning: symbol 'saved_want_console' was not declared. Should it be static?
drivers/char/vt.c:200:5: warning: symbol 'saved_vc_mode' was not declared. Should it be static?
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
CC: Andrew Morton <akpm@linux-foundation.org>

According to commit 22eeef4b

    kgdb,arm: Individual register get/set for arm

It's now replaced by DBG_MAX_REG_NUM.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

breakinfo->pev is a pointer to percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

If CONFIG_KGDB_KDB is set and CONFIG_KALLSYMS is not set the kernel
will fail to build with the error:

kernel/built-in.o: In function `kallsyms_symbol_next':
kernel/debug/kdb/kdb_support.c:237: undefined reference to `kdb_walk_kallsyms'
kernel/built-in.o: In function `kallsyms_symbol_complete':
kernel/debug/kdb/kdb_support.c:193: undefined reference to `kdb_walk_kallsyms'

The kdb_walk_kallsyms needs a #ifdef proper header to match the C
implementation.  This patch also fixes the compiler warnings in
kdb_support.c when compiling without CONFIG_KALLSYMS set.  The
compiler warnings are a result of the kallsyms_lookup() macro not
initializing the two of the pass by reference variables.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Reported-by: NMichal Simek <monstr@monstr.eu>

Commit 58f9b0b0 should
contain this fix too.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Commit dbbdee94 removed
of_irq_pci_swizzle but didn't use pci_swizzle_interrupt_pin
instead.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Marvell and GPIO bindings live in their own files, so the TOC should not
mention them.

Also fix chapters numbering.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

If a video head and keyboard are hooked up, specifying "console=ttyS0"
or similar to use a serial console will not work properly.

The key issue is that we must register all serial console capable
devices with register_console(), otherwise the command line specified
device won't be found.  The sun serial drivers would only register
themselves as console devices if the OpenFirmware specified console
device node matched.  To fix this part we now unconditionally get
the serial console register by setting serial_drv->cons always.

Secondarily we must not add_preferred_console() using the firmware
provided console setting if the user gaven an override on the kernel
command line using "console="  The "primary framebuffer" matching
logic was always triggering o n openfirmware device node match, make
it not when a command line override was given.
Reported-by: NFrans Pop <elendil@planet.nl>
Tested-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like others in the Mini series, the Dell Mini 1012 does not support
the smbios hook required by dell-laptop.
Signed-off-by: NVictor van den Elzen <victor.vde@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

On the T410s and most likely other current models, Fn-F6 is labeled as
Camera/Headphone key.  Report key presses as KEY_CAMERA.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Acked-by: NJerone Young <jerone.young@canonical.com>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Use the quirks engine to select model-specific keymaps, which makes
it much easier to extend should we need it.

Keycodes are based on the tables at
http://www.thinkwiki.org/wiki/Default_meanings_of_special_keys.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Use a safer coding style for the hotkey keymap.  This does not fix any
problems, as the current code is correct.  But it might help avoid
mistakes in the future.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

acpi_video_backlight_support() already tells us if ACPI is handling
backlight control through the generic ACPI handle.  It is better to just
trust it.

While at it, adjust down a printk priority, and test earlier for
brightness_enable=0.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>