- 28 10月, 2010 12 次提交
-
-
由 Akira Takeuchi 提交于
Remove the monitor trap function and the set_jtag_stub function as they're not really necessary. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Add CPU register declarations for the AM34 subarch. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Don't hard code the cacheline size in the cache control register definitions. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Move the DMA engine control register definitions to the MN103E010 processor directory so that the MN2WS0050 processor can have its own. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Differentiate AM33_2 and AM33_3 CPU cores in configuration. The MN103E010 processor contains an AM33_2 core. Whilst we're at it, prepare for AM34-based stuff by declaring AM34_2 too. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
The local_irq_disable() function and co. merely raise the interrupt mask on the MN10300 arch to exclude normal interrupts. This still lets other, higher priority maskable interrupts through, such as are used to service gdbstub's serial port and the MN10300 on-chip serial port virtual FIFOs. Provide functions to allow the maskable interrupts to be fully disabled, which will exclude those interrupts. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Add reads[bwl]() and writes[bwl]() for MN10300. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Akira Takeuchi 提交于
Don't cast away the volatile in test_bit()'s parameter when we change its type from const volatile void * so that we can dereference it. Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Prevent cnt32_to_63() from being preempted in sched_clock() because it may read its internal counter, get preempted, get delayed for more than the half period of the 'TSC' and then write the internal counter, thus corrupting it. Whilst some callers of sched_clock() have interrupts disabled or hold spinlocks, not all do, and so preemption must be held here. Note that sched_clock() is called from lockdep, but that shouldn't be a problem because although preempt_disable() calls into lockdep, lockdep has a recursion counter to deal with this. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Justin Chen 提交于
Change the index to unsigned long in all bitops for [mn10300] Signed-off-by: NJustin Chen <justin.chen@hp.com> Reviewed-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Stoyan Gaydarov 提交于
Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 27 10月, 2010 16 次提交
-
-
由 Andrew Morton 提交于
Silly though it is, completions and wait_queue_heads use foo_ONSTACK (COMPLETION_INITIALIZER_ONSTACK, DECLARE_COMPLETION_ONSTACK, __WAIT_QUEUE_HEAD_INIT_ONSTACK and DECLARE_WAIT_QUEUE_HEAD_ONSTACK) so I guess workqueues should do the same thing. s/INIT_WORK_ON_STACK/INIT_WORK_ONSTACK/ s/INIT_DELAYED_WORK_ON_STACK/INIT_DELAYED_WORK_ONSTACK/ Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philippe De Muyter 提交于
Long ago, PT_TRACESYS_OFF and friends were introduced as hard defines to avoid straight constants in assembler parts of linux m68k. They are not used anymore, and were not updated to follow changes in linux kernel. Remove them. When similar constants are needed, they are now generated using asm-offsets.c. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hagen Paul Pfeifer 提交于
Use the new {max,min}3 macros to save some cycles and bytes on the stack. This patch substitutes trivial nested macros with their counterpart. Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Cc: Joe Perches <joe@perches.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
This patch removes __do_IRQ() from user mode linux. __do_IRQ is deprecated. Signed-off-by: NRichard Weinberger <richard@nod.at> Cc: Jeff Dike <jdike@addtoit.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
With glibc 2.11 or later that was built with --enable-multi-arch, the UML link fails with undefined references to __rel_iplt_start and similar symbols. In recent binutils, the default linker script defines these symbols (see ld --verbose). Fix the UML linker scripts to match the new defaults for these sections. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
I think that it's better to detect DMA misuse at build time rather than calling BUG_ON. Architectures that can't do DMA need to define CONFIG_NO_DMA. Thanks to Sam Ravnborg for explaining how CONFIG_NO_DMA and CONFIG_HAS_DMA work: http://marc.info/?l=linux-kernel&m=128359913825550&w=2 HAS_DMA is defined like this: config HAS_DMA boolean depends on !NO_DMA default y So to set HAS_DMA to true an arch should do: 1) Do not define NO_DMA 2) Define NO_DMA abd set it to 'n' Must archs - including um - used principle 1). In the um case we want to say that we do NOT have any DMA. This can be done in two ways. a) define NO_DMA and set it to 'y' b) redefine HAS_DMA and set it to 'n'. The patch you provided used principle b) where other archs use principle a). So I suggest you should use principle a) for um too. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Jeff Dike <jdike@addtoit.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
T2 are the only alpha SMP systems that do HAE switching at runtime, which is fundamentally racy on SMP. This patch limits MMIO space on T2 to HAE0 only, like we did on MCPCIA (rawhide) long ago. This leaves us with only 112 Mb of PCI MMIO (128 Mb HAE aperture minus 16 Mb reserved for EISA), but since linux PCI allocations are reasonably tight, it should be enough for sane hardware configurations. Also, fix a typo in MCPCIA_FROB_MMIO macro which shouldn't call set_hae() if MCPCIA_ONE_HAE_WINDOW is defined. It's more for correctness, as set_hae() is a no-op anyway in that case. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
access_error() already takes error_code as an argument, so there is no need for an additional write flag. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Acked-by: NWu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: NWu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Now that the KM_type stuff is history, clean up the compiler warning. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
Commit df9ee292 ("Fix IRQ flag handling naming") changed the IRQ flag handling naming scheme and broke UML: In file included from arch/um/include/asm/fixmap.h:5, from arch/um/include/shared/um_uaccess.h:10, from arch/um/include/asm/uaccess.h:41, from arch/um/include/asm/thread_info.h:13, from include/linux/thread_info.h:56, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/stat.h:60, from include/linux/module.h:10, from init/main.c:13: arch/um/include/asm/system.h:11:1: warning: "local_save_flags" redefined This patch brings the new scheme to UML and makes it work again. Signed-off-by: NRichard Weinberger <richard@nod.at> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
The linker script cleanup that I did in commit 5d150a97 ("um: Clean up linker script using standard macros.") (2.6.32) accidentally introduced an ALIGN(PAGE_SIZE) when converting to use INIT_TEXT_SECTION; Richard Weinberger reported that this causes the kernel to segfault with CONFIG_STATIC_LINK=y. I'm not certain why this extra alignment is a problem, but it seems likely it is because previously __init_begin = _stext = _text = _sinittext and with the extra ALIGN(PAGE_SIZE), _sinittext becomes different from the rest. So there is likely a bug here where something is assuming that _sinittext is the same as one of those other symbols. But reverting the accidental change fixes the regression, so it seems worth committing that now. Signed-off-by: NTim Abbott <tabbott@ksplice.com> Reported-by: NRichard Weinberger <richard@nod.at> Cc: Jeff Dike <jdike@addtoit.com> Tested by: Antoine Martin <antoine@nagafix.co.uk> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
This fixes a issue which was introduced by fe2cc53e ("uml: track and make up lost ticks"). timeval_to_ns() returns long long and not int. Due to that UML's timer did not work properlt and caused timer freezes. Signed-off-by: NRichard Weinberger <richard@nod.at> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 10月, 2010 12 次提交
-
-
由 Nicolas Ferre 提交于
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and board files. This also configures the DMA controller slave interface for at_hdmac dmaengine driver. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
When using CP15 cache operations (c7), we make sure that Rd (r0) is actually 0 as ARM 926 TRM is saying. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
For power management at91_pm_enter() routine, use the cpu_do_idle() for a rock solid "wait for interrupt" implementation. For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as we can access RAM even while in self-refresh mode. We keep plain access to CP15 for at91rm9200 as this feature is not available: instructions have to be in a single cache line. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Several at91sam9 chips need the alternate reset procedure to be sure to halt SDRAM smoothly before resetting the chip. This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips affected. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Generalize assembler reset routine to allow use on several at91sam9 chips. This patch replace double definitions of SDRAM controller registers and RSTC registers with use of classical header files. For this rework, we remove the not needed icache flush as it is already done in the calling function: arm_machine_restart(). Rename at91sam9g20_reset.S to generalize to several chips. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Preparing next patch with longer names Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Peter Horton 提交于
If the SDRAM is not cleanly shutdown before reset it can be left driving the bus, which then stops the bootloader booting from NAND. Signed-off-by: NPeter Horton <phorton@bitbox.co.uk> [nicolas.ferre@atmel.com: change file header line order] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Peter Gsellmann 提交于
Board is a carrier board for Stamp9G20, with additional peripherals for a building automation system Signed-off-by: NPeter Gsellmann <pgsellmann@portner-elektronik.at> [nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ian Campbell 提交于
CC arch/x86/xen/setup.o arch/x86/xen/setup.c: In function 'xen_memory_setup': arch/x86/xen/setup.c:161: error: implicit declaration of function 'xen_initial_domain' Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 David Howells 提交于
In the MN10300 arch, we occasionally see an assertion being tripped in alloc_cwqs() at the following line: /* just in case, make sure it's actually aligned */ ---> BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align)); return wq->cpu_wq.v ? 0 : -ENOMEM; The values are: wa->cpu_wq.v => 0x902776e0 align => 0x100 and align is calculated by the following: const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS, __alignof__(unsigned long long)); This is because the pointer in question (wq->cpu_wq.v) loses some of its lower bits to control flags, and so the object it points to must be sufficiently aligned to avoid the need to use those bits for pointing to things. Currently, 4 control bits and 4 colour bits are used in normal circumstances, plus a debugging bit if debugging is set. This requires the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512 bytes aligned with debugging). PERCPU() alignment on MN13000, however, is only 32 bytes as set in vmlinux.lds.S. So we set this to PAGE_SIZE (4096) to match most other arches and stick a comment in alloc_cwqs() for anyone else who triggers the assertion. Reported-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NMark Salter <msalter@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Frysinger 提交于
No one uses these MMRs so we didn't notice when the anomaly handling logic was inverted. Reported-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
This code was useful during early port development when our icache code wasn't solid, but that ship has sailed long ago, and no code calls this function anymore (irq_panic). So punt it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-