Rename to a name that better match the other kconfig targets.

listnewconfig shall read as:

- list new options compared to current configuration

New options are now written to stdout so one can redirect the output.

Do not exit with an error code if there is new options.

These are feature changes compared to the original
nonint_oldconfig - but as this feature has not yet been in a
released kernel it should not matter.

It is still possible to do:

make listnewconfig
lookup new config options in Kconfig*
edit .config
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Acked-by: NAristeu Rozanski <aris@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Rename target to something that fall more in line
with the other kconfig targets.

oldnoconfig shall read as:

- read the old configuration and set all new options to no
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The list of options supported by conf is growing
and their abbreviation did not resemble anything usefull.

So drop the single letter options in favour of long options.

The long options are named equal to what we know from
the make target.
The internal implmentation was changed to match this,
resulting in much more readable code.

Support for short options is dropped - no one is supposed
to call this program direct anyway.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

There seems to be a kconfig bug due to MODULES not always being
evaluated if no .config is found. Take the following Kconfig as an
example:

config MODULES
	def_bool y

config FOO
	def_tristate m

With no .config, the following configuration is generated:

CONFIG_MODULES=y
CONFIG_FOO=y

With an empty .config, the following:

CONFIG_MODULES=y
CONFIG_FOO=m

Tristate choice statements can also exhibit the problem, due to having an
implicit rev_dep (select) containing "m".

The problem is that MODULES is never evaluted in conf_read_simple() unless
there's a .config. The following patch fixes this.
Signed-off-by: NUlf Magnusson <ulfalizer.lkml@gmail.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Give boolean symbols a 50% chance of getting enabled, rather than 67%.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This makes it so "make oldconfig" really prompts for any choice where
options that previously weren't visible just became so. Previously one
would have to remember to go over all choice values and check whether
some that previously couldn't be selected now can be.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The "select" statement in Kconfig files allows the enabling of options
even if they have unmet direct dependencies (i.e. "depends on" expands
to "no"). Currently, the "depends on" clauses are used in calculating
the visibility but they do not affect the reverse dependencies in any
way.

The patch introduces additional tracking of the "depends on" statements
and prints a warning on selecting an option if its direct dependencies
are not met.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Not sure if this is correct or not, but with
make menuconfig
  HOSTCC  scripts/kconfig/conf.o
scripts/kconfig/conf.c: In function 'conf_sym':
scripts/kconfig/conf.c:159:6: warning: variable 'type' set but not used
scripts/kconfig/conf.c: In function 'conf_choice':
scripts/kconfig/conf.c:231:6: warning: variable 'type' set but not used
  HOSTLD  scripts/kconfig/mconf

I get this using gcc 4.6.0 the below change fixes this form me.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Truncate list items to fit in a single line, otherwise those items
which have long prompts will cover some other items.

This follows the behavior of menubox.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Run:
	make ARCH=arm menuconfig

And then select "System Type" -> "ARM system type". The kconfig
"choice" menu at this point looks empty.

It's because config ARCH_S3C2410 has a long prompt:

config ARCH_S3C2410
        bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
	...

menuconfig centers the checklist according to this prompt without
considering the width of the list, and then things get wrong.
Reported-by: NNobin Mathew <nobin.mathew@gmail.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This feature has been supported in menuconfig and gconfig, so
here add it to xconfig.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Remove ConfigInfoView::setSource().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

@ok is a pointer to a bool var, so we should check the value of
*ok. But actually we don't need to check it, so just remove the
if statement.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

In gconfig if you enable "Show all options", you'll see some "(null)"
config options, and clicking those options triggers a warning:

(gconf:9368): Gtk-CRITICAL **: gtk_text_buffer_insert_with_tags: assertion `text != NULL' failed
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The logic should be reversed.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Suggested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Those configs are not new:

  $ cat .config
  ...
  CONFIG_NAMESPACES=y
  ...
  CONFIG_BLOCK=y
  ...

But are tagged as NEW:

  $ yes "" | make config > myconf
  $ cat myconf | grep '(NEW)'
  Namespaces support (NAMESPACES) [Y/?] (NEW) y
  ...
  Enable the block layer (BLOCK) [Y/?] (NEW) y
  ...

You can also notice this bug when using gconfig/xconfig.

It's because the SYMBOL_DEF_USER bit of an invisible symbol is cleared
when the config file is read:

int conf_read(const char *name)
{
	...
	for_all_symbols(i, sym) {
		if (sym_has_value(sym) && !sym_is_choice_value(sym)) {
			/* Reset values of generates values, so they'll appear
			 * as new, if they should become visible, but that
			 * doesn't quite work if the Kconfig and the saved
			 * configuration disagree.
			 */
			if (sym->visible == no && !conf_unsaved)
				sym->flags &= ~SYMBOL_DEF_USER;
	...
}

But a menu item which represents an invisible symbol is still
visible, if it's sub-menu is visible, so its SYMBOL_DEF_USER
bit should be set to indicate it's not NEW.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Without this patch, one has to refer to the Kconfig file to find
out the range of an integer/hex symbol.

  │ Symbol: NR_CPUS [=4]
  │ Type  : integer
  │ Range : [2 8]
  │ Prompt: Maximum number of CPUs
  │   Defined at arch/x86/Kconfig:761
  │   Depends on: SMP [=y] && !MAXSMP [=n]
  │   Location:
  │     -> Processor type and features
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Randy suggested to print out the symbol type in gconfig.

Note this change does more than Randy's suggestion, that it also
affects menuconfig and "make config".

  │ Symbol: BLOCK [=y]
  │ Type  : boolean
  │ Prompt: Enable the block layer
  │   Defined at block/Kconfig:4
  │   Depends on: EMBEDDED [=n]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch has been around for a long time in Fedora and Red Hat Enterprise
Linux kernels and it may be useful for others. The nonint_oldconfig target
will fail and print the unset config options while loose_nonint_oldconfig will
simply let the config option unset. They're useful in distro kernel packages
where the config files are built using a combination of smaller config files.

Arjan van de Ven wrote the initial nonint_config and Roland McGrath added the
loose_nonint_oldconfig.

Signed-off-by: Arjan van de Ven <arjan@redhat.com> [defunct email]
Whatevered-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAristeu Rozanski <aris@redhat.com>
[mmarek: whitespace fixes]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

There's a button in gconfig to "Show all options", but I think
normally we are not interested in those configs which have no
prompt and thus can't be changed, so here I add a new button to
show hidden options which have prompts.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Usage:
  Press <Z> to show all config symbols which have prompts.

Quote Tim Bird:

| I've been bitten by this numerous times.  I most often
| use ftrace on ARM, but when I go back to x86, I almost
| always go through a sequence of searching for the
| function graph tracer in the menus, then realizing it's
| completely missing until I disable CC_OPTIMIZE_FOR_SIZE.
|
| Is there any way to have the menu item appear, but be
| unsettable unless the SIZE option is disabled?  I'm
| not a Kconfig guru...

I myself found this useful too. For example, I need to test
ftrace/tracing and want to be sure all the tracing features are
enabled, so I  enter the "Tracers" menu, and press <Z> to
see if there is any config hidden.

I also noticed gconfig and xconfig have a button "Show all options",
but that's a bit too much, and I think normally what we are not
interested in those configs which have no prompt thus can't be
changed by users.

Exmaple:

      --- Tracers
      -*-   Kernel Function Tracer
      - -     Kernel Function Graph Tracer
      [*]   Interrupts-off Latency Tracer
      - -   Preemption-off Latency Tracer
      [*]   Sysprof Tracer

Here you can see 2 tracers are not selectable, and then can find
out how to make them selectable.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This option is a no-op, so remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Just use sym_get_type() and prop_get_type_name().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

zconfdump(), which is used for debugging, can't recognize P_SELECT,
P_RANGE and P_MENU (if associated with a symbol, aka "menuconfig"),
and output something like this:

config X86
  boolean
  default y
  unknown prop 6!
  unknown prop 6!
  unknown prop 6!
  ...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

- fix a typo in documentation
- fix a typo in a printk on error
- fix comments in dialog_inputbox()
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

A symbol's value won't be recalc-ed until we save config file or
enter the menu where the symbol sits.

So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER:

  Symbol: FUNCTION_GRAPH_TRACER [=y]
  Prompt: Kernel Function Graph Tracer
    Defined at kernel/trace/Kconfig:140
    Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y])
    ...

From the dependency it should result in FUNCTION_GRAPH_TRACER=n,
but it still shows FUNCTION_GRAPH_TRACER=y.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

While looking for something else I noticed that the symbol
hash function used by kconfig is quite poor. It doesn't
use any of the standard hash techniques but simply
adds up the string and then uses power of two masking,
which is both known to perform poorly.

The current x86 kconfig has over 7000 symbols.

When I instrumented it showed that the minimum hash chain
length was 16 and a significant number of them was over
30.

It didn't help that the hash table size was only 256 buckets.

This patch increases the hash table size to a larger prime
and switches to a FNV32 hash. I played around with a couple of hash
functions, but that one seemed to perform best with reasonable
hash table sizes.

Increasing the hash table size even further didn't
seem like a good idea, because there are a couple of global
walks which walk the complete hash table.

I also moved the unnamed bucket to 0. It's still the longest
of all the buckets (44 entries), but hopefully it's not
often hit except for the global walk which doesn't care.

The result is a much nicer distribution:
(first column bucket length, second number of buckets with that length)

1: 3505
2: 1236
3: 294
4: 52
5: 3
47: 1		<--- this is the unnamed symbols bucket

There are still some 5+ buckets, but increasing the hash table
even more would be likely not worth it.

This also cleans up the code slightly by removing hard coded
magic numbers.

I didn't notice a big performance difference either way
on my Nehalem system, but I presume it'll help somewhat
on slower systems.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch fixes two problems reported by Jan Engelhardt:
1) Border is now properly placed, to always be visible
2) Long menu items are properly displayed
Reported-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NNir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

scripts/kconfig/nconf.gui.c:23: warning: no previous prototype for 'set_normal_colors'
scripts/kconfig/nconf.gui.c:68: warning: no previous prototype for 'normal_color_theme'
scripts/kconfig/nconf.gui.c:100: warning: no previous prototype for 'no_colors_theme'
scripts/kconfig/nconf.c:455: warning: no previous prototype for 'process_special_keys'
scripts/kconfig/nconf.c:487: warning: no previous prototype for 'get_next_hot'
scripts/kconfig/nconf.c:506: warning: no previous prototype for 'canbhot'
scripts/kconfig/nconf.c:514: warning: no previous prototype for 'is_hot'
scripts/kconfig/nconf.c:522: warning: no previous prototype for 'make_hot'
scripts/kconfig/nconf.c:582: warning: no previous prototype for 'item_make'
scripts/kconfig/nconf.c:626: warning: no previous prototype for 'item_add_str'
scripts/kconfig/nconf.c:656: warning: no previous prototype for 'item_tag'
scripts/kconfig/nconf.c:668: warning: no previous prototype for 'curses_item_index'
scripts/kconfig/nconf.c:673: warning: no previous prototype for 'item_data'
scripts/kconfig/nconf.c:684: warning: no previous prototype for 'item_is_tag'
scripts/kconfig/nconf.c:691: warning: no previous prototype for 'set_config_filename'
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This patch was inspired by the kernel projects page, where an ncurses
replacement for menuconfig was mentioned (by Sam Ravnborg).

Building on menuconfig, this patch implements a more modern look
interface using ncurses and ncurses' satellite libraries (menu, panel,
form). The implementation does not depend on lxdialog, which is
currently distributed with the kernel.
Signed-off-by: NNir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Help text for certain config options is very extensive (the text
includes the names of all  other options the option in question depends
on). Long lines are not wrapped, making it impossible to see the list
without scrolling horizontally.

This patch adds some logic which wraps help screen lines at word
boundaries to prevent truncating.

Tested by running

  ARCH=powerpc make menuconfig O=/tmp/build

which shows that the long lines are now wrapped, and

 ARCH=powerpc make xconfig O=/tmp/build

to demonstrate that it still compiles and operates as expected.
Signed-off-by: NVadim Bendebury <vbendeb@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:

  $ make mrproper
  $ make defconfig && make silentoldconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  scripts/kconfig/conf -s arch/x86/Kconfig

  *** Error during update of the kernel configuration.
  ...

Move the mkdir command to the silentoldconfig target to make it work.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When the output directory is something other than the kernel source,
the streamline_config script gets confused. This patch passes in the
source directory to the script so that it can find the proper files.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Tested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

kconfig's keyword hash, lexer, and parser define various functions used
only locally.  Declare these functions as static, and regenerate the
corresponding generated files.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

zconf.y includes zconf.hash.c from the initial code section.
zconf.hash.c references the token constants from zconf.y.  However,
current bison defines the token constants after the initial code
section, making zconf.hash.c fail to compile.  Move the include of
zconf.hash.c later in zconf.y, so bison puts it after the token
constants.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>

Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: NTrevor Keith <tsrk@tsrk.net>
Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>