Found by the kbuild test robot, the first argument to caam_init_rng
has a spurious ampersand.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HIGHMEM pages may not be mapped so we must kmap them before accessing.
This resolves a random OOPs error that was showing up during OpenSSL SHA tests.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch allocates memory from DMAable region to the caam_rng_ctx object,
earlier it had been statically allocated which resulted in errorneous
behaviour on inserting the caamrng module at the runtime.
Signed-off-by: NNitesh Lal <NiteshNarayanLal@freescale.com>
Acked-by: NRuchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When bringing a new RNG source online, it seems like it would make sense
to use some of its bytes to make the system entropy pool more random,
as done with all sorts of other devices that contain per-device or
per-boot differences.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Optimize the hashing operation in the MXS-DCP by doing two adjustments:
1) Given that the output buffer for the hash is now always correctly aligned,
   we can just use the buffer for the DCP DMA to store the resulting hash.
   We thus get rid of one copying of data. Moreover, we remove an entry from
   dcp_coherent_block{} and thus lower the memory footprint of the driver.
2) We map the output buffer for the hash for DMA only in case we will output
   the hash, not always, as it was now.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The DCP needs the bounce buffers, DMA descriptors and result buffers aligned
to 64 bytes (yet another hardware limitation). Make sure they are aligned by
properly aligning the structure which contains them during allocation.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make omap_des_copy_needed(), omap_des_copy_sgs(), because these
functions are used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1) SSYNC instruction is blackfin specific and takes no effect in this driver.
2) DMA descriptor and SG middle buffer are in DMA coherent memory. No need
to flush.
3) Turn kzalloc, ioremap and request_irq into managed device APIs respectively.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the crypto layer is able to queue up a command for processing
by the CCP on the initial call to ccp_crypto_enqueue_request and
the CCP returns -EBUSY, then if the backlog flag is not set the
command needs to be freed and not added to the active command list.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Invoke the callback routine associated with the crypto context
if an error is encountered sending the command to the CCP during
backlog processing.  This is needed to free any resources used
by the command.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If a CCP command has been queued for processing at the
crypto layer then, when dequeueing it for processing, the
"can backlog" flag must be set so that the request isn't
lost if the CCP backlog queue limit is reached.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

My guess is that this little endian configuration is never found in real
life, but if it were then the writel() arguments are in the wrong order
so the driver would crash immediately.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This driver has never been hooked up in any board file, and cannot be
instantiated via device tree. I've been told that, at least on Tegra20,
the HW is slower at crypto than the main CPU. I have no test-case for
it. Hence, remove it.

Cc: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add config and build options for the omap-des driver.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add omap-des driver with platform data for OMAP4/AM43xx. Support added for DES
ECB and CBC modes. Also add support for 3DES operation where 3 64-bit keys are
used to perform a DES encrypt-decrypt-encrypt (des3_ede) operation on a buffer.

Tests have been conducted with the CRYPTO test manager, and functionality is
verified at different page length alignments.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We should test the error case for each platform_get_irq() assignment and
propagate the error accordingly.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC ERA has to be retrieved by reading the "fsl,sec-era" property
from the device tree. This property is updated/filled in by
u-boot.
Signed-off-by: NAlex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

My static checker complains that:

	drivers/char/hw_random/core.c:341 hwrng_register()
	warn: we tested 'old_rng' before and it was 'false'

The problem is that sometimes we test "if (!old_rng)" and sometimes we
test "if (must_register_misc)".  The static checker knows they are
equivalent but a human being reading the code could easily be confused.

I have simplified the code by removing the "must_register_misc" variable
and I have removed the redundant check on "if (!old_rng)".
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

stmp_reset_block() may fail, so check its return value and propagate it in the
case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Using devm_kzalloc() can make the code cleaner.

While at it, remove the devm_kzalloc error message as there is standard OOM
message done by the core.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In function talitos_probe(), it will jump to err_out when getting an
error in talitos_probe_irq(). Then the uninitialized list head
priv->alg_list will be used in function talitos_remove(). In this case
we would get a call trace like the following. So move up the
initialization of priv->alg_list.

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc0459ff4
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=8 P1020 RDB
  Modules linked in:
  CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0-08789-g54c0a4b4 #33
  task: cf050000 ti: cf04c000 task.ti: cf04c000
  NIP: c0459ff4 LR: c0459fd4 CTR: c02f2438
  REGS: cf04dcb0 TRAP: 0300   Tainted: G        W     (3.13.0-08789-g54c0a4b4)
  MSR: 00029000 <CE,EE,ME>  CR: 82000028  XER: 20000000
  DEAR: 00000000 ESR: 00000000
  GPR00: c045ac28 cf04dd60 cf050000 cf2579c0 00021000 00000000 c02f35b0 0000014e
  GPR08: c07e702c cf104300 c07e702c 0000014e 22000024 00000000 c0002a3c 00000000
  GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c082e4e0 000000df
  GPR24: 00000000 00100100 00200200 cf257a2c cf0efe10 cf2579c0 cf0efe10 00000000
  NIP [c0459ff4] talitos_remove+0x3c/0x1c8
  LR [c0459fd4] talitos_remove+0x1c/0x1c8
  Call Trace:
  [cf04dd60] [c07485d8] __func__.13331+0x1241c8/0x1391c0 (unreliable)
  [cf04dd90] [c045ac28] talitos_probe+0x244/0x998
  [cf04dde0] [c0306a74] platform_drv_probe+0x28/0x68
  [cf04ddf0] [c0304d38] really_probe+0x78/0x250
  [cf04de10] [c030505c] __driver_attach+0xc8/0xcc
  [cf04de30] [c0302e98] bus_for_each_dev+0x6c/0xb8
  [cf04de60] [c03043cc] bus_add_driver+0x168/0x220
  [cf04de80] [c0305798] driver_register+0x88/0x130
  [cf04de90] [c0002458] do_one_initcall+0x14c/0x198
  [cf04df00] [c079f904] kernel_init_freeable+0x138/0x1d4
  [cf04df30] [c0002a50] kernel_init+0x14/0x124
  [cf04df40] [c000ec40] ret_from_kernel_thread+0x5c/0x64
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change from scheduling work to scheduling a tasklet to perform
the callback operations.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move to a single queue to serialize requests within a tfm. When
testing using IPSec with a large number of network connections
the per cpu tfm queuing logic was not working properly.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move the support to perform an HMAC calculation into
the CCP operations file.  This eliminates the need to
perform a synchronous SHA operation used to calculate
the HMAC.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Introduce module parameters that allow for disabling of a
crypto algorithm by not registering the algorithm with the
crypto API.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There are some suspicious looking lines of code in the new ccp driver, including
one that assigns a variable to itself, and another that overwrites a previous assignment.

This may have been a cut-and-paste error where 'src' was forgotten to be changed to 'dst'.
I have no hardware to test this, so this is untested.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>