The bfin_mac driver keeps its statistics in net_device->stats, so the
stats member in struct bfin_mac_local is unused. Remove it, as well as
the accompanying comment.

Cc: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ndev is being checked to see if it is a null pointer however before
the null check ndev is being dereferenced; hence there is a potential
null pointer dereference bug that needs fixing. Fix this by only
dereferencing ndev after the null check.

Detected by CoverityScan, CID#1420760, CID#140761 ("Dereference
before null check")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: mpls: multipath route cleanups

When a device associated with a nexthop is deleted, the nexthop in
the route is effectively removed, so remove it from the route dump.

Further, when all nexhops have been deleted the route is effectively
done, so remove the route.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When all devices for all nexthops in a route have been deleted, the
route is effectively dead, so remove it.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the device for a nexthop in a multipath route is deleted, the nexthop
is effectively removed from the route. Currently, a route dump still
returns the nexhop though without the device set:

$ ip -f mpls ro ls
100
	nexthopvia inet 10.11.1.2  dev br0
	nexthopvia inet 10.100.3.1  dev eth3
$ ip li del br0
$ ip -f mpls ro ls
100
	nexthopvia inet 10.11.1.2  dev * dead linkdown
	nexthopvia inet 10.100.3.1  dev eth3

Since the nexthop is effectively deleted, drop the hop from the route
dump.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

K. Y. Srinivasan says:

====================
netvsc: Fix miscellaneous issues

Fix miscellaneous issues.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the return value correctly.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All netvsc channels are handled via NAPI. Setup the "read mode" correctly
for the netvsc sub-channels.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jonas Bonn says:

====================
GTP SGSN-side tunnel

Changes since v4:

* Respin the series on top of net-next; the conflicts were trivial,
  amounting to just code having been shifted about
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The GTP-tunnel driver is explicitly GGSN-side as it searches for PDP
contexts based on the incoming packets _destination_ address.  If we
want to place ourselves on the SGSN side of the  tunnel, then we want
to be identifying PDP contexts based on _source_ address.

Let it be noted that in a "real" configuration this module would never
be used:  the SGSN normally does not see IP packets as input.  The
justification for this functionality is for PGW load-testing applications
where the input to the SGSN is locally generally IP traffic.

This patch adds a "role" argument at GTP-link creation time to specify
whether we are on the GGSN or SGSN side of the tunnel; this flag is then
used to determine which part of the IP packet to use in determining
the PDP context.
Signed-off-by: NJonas Bonn <jonas@southpole.se>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a mostly cosmetic rename of the SGSN netlink attribute to
the GTP link.  The justification for this is that we will be making
the module support decapsulation of "downstream" SGSN packets, in
which case the netlink parameter actually refers to the upstream GGSN
peer.  Renaming the parameter makes the relationship clearer.

The legacy name is maintained as a define in the header file in order
to not break existing code.
Signed-off-by: NJonas Bonn <jonas@southpole.se>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniele Palmas says:

====================
net: usb: qmi_wwan: add qmap mux protocol support

This patch adds support for qmap mux protocol available in recent
Qualcomm based modems.

The qmap mux protocol can be used for multiplexing data packets in
order to have multiple ip streams through the same physical device.

Two new sysfs files are added for adding/removing the qmap mux based
interfaces (named qmimux):

/sys/class/net/<iface>/qmi/add_mux
/sys/class/net/<iface>/qmi/del_mux

Main patch author is Bjørn Mork <bjorn@mork.no>

An userspace implementation of the qmi requests needed to support
multiple ip streams is already available (namely libqmi since
version 1.18.0).

The qmap mux feature has been recently implemented in Codeaurora
gobinet out-of-kernel driver that was the inspiration for this
development.

Tests have been performed with Telit LE922A6 (PID 0x1040)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the documentation related to the new files added for
qmap mux support.
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for qmap mux protocol available in recent
Qualcomm based modems.

The qmap mux protocol can be used for multiplexing data packets in
order to have multiple ip streams through the same physical device.

Two new sysfs files are added for adding/removing the qmap mux based
interfaces (named qmimux):

- /sys/class/net/<iface>/qmi/add_mux
- /sys/class/net/<iface>/qmi/del_mux

Main patch author is Bjørn Mork <bjorn@mork.no>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the return allocated index and err value are multiplexed.
This patch changes the API to decouple the ret value from the allocated
index.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Add busy poll support for epoll

This patch set adds support for using busy polling with epoll. The main
idea behind this is that we record the NAPI ID for the last event that is
moved onto the ready list for the epoll context and then when we no longer
have any events on the ready list we begin polling with that ID. If the
busy polling does not yield any events then we will reset the NAPI ID to 0
and wait until a new event is added to the ready list with a valid NAPI ID
before we will resume busy polling.

Most of the changes in this set authored by me are meant to be cleanup or
fixes for various things. For example, I am trying to make it so that we
don't perform hash look-ups for the NAPI instance when we are only working
with sender_cpu and the like.

At the heart of this set is the last 3 patches which enable epoll support
and add support for obtaining the NAPI ID of a given socket. With these it
becomes possible for an application to make use of epoll and get optimal
busy poll utilization by stacking multiple sockets with the same NAPI ID on
the same epoll context.

v1: The first version of this series only allowed epoll to busy poll if all
    of the sockets with a NAPI ID shared the same NAPI ID. I feel we were
    too strict with this requirement, so I changed the behavior for v2.
v2: The second version was pretty much a full rewrite of the first set. The
    main changes consisted of pulling apart several patches to better
    address the need to clean up a few items and to make the code easier to
    review. In the set however I went a bit overboard and was trying to fix
    an issue that would only occur with 500+ years of uptime, and in the
    process limited the range for busy_poll/busy_read unnecessarily.
v3: Split off the code for limiting busy_poll and busy_read into a separate
    patch for net.
    Updated patch that changed busy loop time tracking so that it uses
    "local_clock() >> 10" as we originally did.
    Tweaked "Change return type.." patch by moving declaration of "work"
    inside the loop where is was accessed and always reset to 0.
    Added "Acked-by" for patches that received acks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This socket option returns the NAPI ID associated with the queue on which
the last frame is received. This information can be used by the apps to
split the incoming flows among the threads based on the Rx queue on which
they are received.

If the NAPI ID actually represents a sender_cpu then the value is ignored
and 0 is returned.
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds busy poll support to epoll. The implementation is meant to
be opportunistic in that it will take the NAPI ID from the last socket
that is added to the ready list that contains a valid NAPI ID and it will
use that for busy polling until the ready list goes empty.  Once the ready
list goes empty the NAPI ID is reset and busy polling is disabled until a
new socket is added to the ready list.

In addition when we insert a new socket into the epoll we record the NAPI
ID and assume we are going to receive events on it.  If that doesn't occur
it will be evicted as the active NAPI ID and we will resume normal
behavior.

An application can use SO_INCOMING_CPU or SO_REUSEPORT_ATTACH_C/EBPF socket
options to spread the incoming connections to specific worker threads
based on the incoming queue. This enables epoll for each worker thread
to have only sockets that receive packets from a single queue. So when an
application calls epoll_wait() and there are no events available to report,
busy polling is done on the associated queue to pull the packets.
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the core functionality in sk_busy_loop() to napi_busy_loop() and
make it independent of sk.

This enables re-using this function in epoll busy loop implementation.
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch flips the logic we were using to determine if the busy polling
has timed out.  The main motivation for this is that we will need to
support two different possible timeout values in the future and by
recording the start time rather than when we would want to end we can focus
on making the end_time specific to the task be it epoll or socket based
polling.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

checking the return value of sk_busy_loop. As there are only a few
consumers of that data, and the data being checked for can be replaced
with a check for !skb_queue_empty() we might as well just pull the code
out of sk_busy_loop and place it in the spots that actually need it.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of defining two versions of skb_mark_napi_id I think it is more
readable to just match the format of the sk_mark_napi_id functions and just
wrap the contents of the function instead of defining two versions of the
function.  This way we can save a few lines of code since we only need 2 of
the ifdef/endif but needed 5 for the extra function declaration.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While working on some recent busy poll changes we found that child sockets
were being instantiated without NAPI ID being set.  In our first attempt to
fix it, it was suggested that we should just pull programming the NAPI ID
into the function itself since all callers will need to have it set.

In addition to the NAPI ID change I have dropped the code that was
populating the Rx hash since it was actually being populated in
tcp_get_cookie_sock.
Reported-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is a cleanup/fix for NAPI IDs following the changes that made it
so that sender_cpu and napi_id were doing a better job of sharing the same
location in the sk_buff.

One issue I found is that we weren't validating the napi_id as being valid
before we started trying to setup the busy polling.  This change corrects
that by using the MIN_NAPI_ID value that is now used in both allocating the
NAPI IDs, as well as validating them.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox mlx5e XDP performance optimization

This series provides some preformancee optimizations for mlx5e
driver, especially for XDP TX flows.

1st patch is a simple change of rmb to dma_rmb in CQE fetch routine
which shows a huge gain for both RX and TX packet rates.

2nd patch removes write combining logic from the driver TX handler
and simplifies the TX logic while improving TX CPU utilization.

All other patches combined provide some refactoring to the driver TX
flows to allow some significant XDP TX improvements.

More details and performance numbers per patch can be found in each patch
commit message compared to the preceding patch.

Overall performance improvemnets
  System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

Test case                   Baseline      Now      improvement
---------------------------------------------------------------
TX packets (24 threads)     45Mpps        54Mpps      20%
TC stack Drop (1 core)      3.45Mpps      3.6Mpps     5%
XDP Drop      (1 core)      14Mpps        16.9Mpps    20%
XDP TX        (1 core)      10.4Mpps      13.7Mpps    31%
====================
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Different SQ types (tx, xdp, ico) are growing apart, we separate them
and remove unwanted parts in each one of them, to simplify data path and
utilize data cache.

Remove DB union from SQ structures since it is not needed anymore as we
now have different SQ data type for each SQ.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the next patches we will introduce different SQ types,
and we would want to reuse those functions, in this patch we make them
agnostic to SQ type (txq, xdp, ico).
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename mlx5e_{create,destroy}_{sq,rq,cq} to
mlx5e_{alloc,free}_{sq,rq,cq}.

Rename mlx5e_{enable,disable}_{sq,rq,cq} to
mlx5e_{create,destroy}_{sq,rq,cq}.

mlx5e_{enable,disable}_{sq,rq,cq} used to actually create/destroy the SQ
in FW, so we rename them to align the functions names with FW semantics.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the next patches we will introduce different SQ types, for that we here
generalize some TX helper functions to work with more basic SQ parameters,
in order to re-use them for the different SQ types.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XDP SQ has a fixed size WQE (MLX5E_XDP_TX_WQEBBS = 1) and only posts
one kind of WQE (MLX5_OPCODE_SEND),

Also we initialize SQ descriptors static fields once on open_xdpsq,
rather than every time on critical path.

Optimize the code in light of those facts and add a prefetch of the TX
descriptor first thing in the xdp xmit function.

Performance improvement:
System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

Test case              Before     Now        improvement
---------------------------------------------------------------
XDP TX   (1 core)      13Mpps    13.7Mpps       5%
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Handle XDP TX completions before handling RX packets, to make sure more
free space is available for XDP TX packets a moment before handling
RX packets.

Performance improvement:
System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

Test case              Before     Now      improvement
---------------------------------------------------------------
XDP Drop (1 core)      16.9Mpps  16.9Mpps    No change
XDP TX   (1 core)      12Mpps    13Mpps      8%
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To save many rq->channel->sq dereferences in fast-path.
And rename it to xdpsq.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move struct mlx5e_rq and friends to appear after mlx5e_sq declaration in
en.h.

We will need this for next patch to move the mlx5e_sq instance into
mlx5e_rq struct for XDP SQs.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XDP code belongs to RX path, move mlx5e_poll_xdp_tx_cq and
mlx5e_free_xdp_tx_descs to en_rx.c.

Rename them to mlx5e_poll_xdpsq_cq and mlx5e_free_xdpsq_descs.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One is sufficient since Blue Flame is not supported anymore.
This will also come in handy for switchdev mode to save resources, since
VF representors will use same single UAR as well for their own SQs.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx5e netdev Blue Flame (write combining) support demands a lot of
overhead for a little latency gain for some special cases, this overhead
is hurting the common case.

Here we remove xmit Blue Flame support by creating all bfregs with no
write combining for all SQs, and we remove a lot of BF logic and
conditions from xmit data path.

Simplify mlx5e_tx_notify_hw (doorbell function) by removing BF related
code and by removing one memory barrier needed for WC mapped SQ doorbell
buffers, which no longer exist.

Performance improvement:
System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

Test case                   Before      Now      improvement
---------------------------------------------------------------
TX packets (24 threads)     50Mpps      54Mpps    8%
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dma_rmb in mlx5e_get_cqe rather than aggressive rmb (at least on
some architectures), this should help improve the performance on such
CPU archs where dma_rmb is optimized.

Performance improvement:
System: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz

Test case                   Baseline      Now      improvement
---------------------------------------------------------------
TX packets (24 threads)     45Mpps        50Mpps      11%
TC stack Drop (1 core)      3.45Mpps      3.6Mpps     5%
XDP Drop      (1 core)      14Mpps        16.9Mpps    20%
XDP TX        (1 core)      10.4Mpps      12Mpps      15%
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bcm_sf2 does require the MDIO_BCM_UNIMAC driver which is now dependent
on OF_MDIO but also internally uses of_mdio.c provided routines which
are guarted with OF_MDIO.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>