This lets the transport do endian conversion if necessary, and insulates
the drivers from the difference.

Most drivers can use the simple helpers virtio_cread() and virtio_cwrite().
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This lets the us do endian conversion if necessary, and insulates the
drivers from that change.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

unreferenced object 0xffff88003d467e20 (size 32):
  comm "softirq", pid 0, jiffies 4295197765 (age 6.364s)
  hex dump (first 32 bytes):
    28 19 bf 3d 00 00 00 00 0c 00 00 00 01 00 01 00  (..=............
    02 dc 51 3c 00 00 00 00 56 00 00 00 00 00 00 00  ..Q<....V.......
  backtrace:
    [<ffffffff8152db19>] kmemleak_alloc+0x59/0xc0
    [<ffffffff81102e93>] __kmalloc+0xf3/0x180
    [<ffffffff812db5d6>] vring_add_indirect+0x36/0x280
    [<ffffffff812dc59f>] virtqueue_add_outbuf+0xbf/0x4e0
    [<ffffffff813a8b30>] start_xmit+0x1a0/0x3b0
    [<ffffffff81445861>] dev_hard_start_xmit+0x2d1/0x4d0
    [<ffffffff81460052>] sch_direct_xmit+0xf2/0x1c0
    [<ffffffff81445c28>] dev_queue_xmit+0x1c8/0x460
    [<ffffffff814e3187>] ip6_finish_output2+0x1d7/0x470
    [<ffffffff814e34b0>] ip6_finish_output+0x90/0xb0
    [<ffffffff814e3507>] ip6_output+0x37/0xb0
    [<ffffffff815021eb>] igmp6_send+0x2db/0x470
    [<ffffffff81502645>] igmp6_timer_handler+0x95/0xa0
    [<ffffffff8104b57c>] call_timer_fn+0x2c/0x90
    [<ffffffff8104b7ba>] run_timer_softirq+0x1da/0x1f0
    [<ffffffff81045721>] __do_softirq+0xd1/0x1b0

Address gets embedded in a descriptor via virt_to_phys().  See detach_buf,
which frees it:

	if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT)
		kfree(phys_to_virt(vq->vring.desc[i].addr));
Reported-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Fix-suggested-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Typing-done-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The freeze and restore functions defined in virtio drivers are used
for suspend and hibernate, so CONFIG_PM_SLEEP is more appropriate than
CONFIG_PM. This patch replace all CONFIG_PM with CONFIG_PM_SLEEP for
virtio drivers that implement freeze and restore callbacks.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Pull drm fixes from Dave Airlie:
 - some small fixes for msm and exynos
 - a regression revert affecting nouveau users with old userspace
 - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  Revert "drm: mark context support as a legacy subsystem"
  drm/i915: Don't enable the cursor on a disable pipe
  drm/i915: do not update cursor in crtc mode set
  drm/exynos: fix return value check in lowlevel_buffer_allocate()
  drm/exynos: Fix address space warnings in exynos_drm_fbdev.c
  drm/exynos: Fix address space warning in exynos_drm_buf.c
  drm/exynos: Remove redundant OF dependency
  drm/msm: drop unnecessary set_need_resched()
  drm/i915: kill set_need_resched
  drm/msm: fix potential NULL pointer dereference
  drm/i915/dvo: set crtc timings again for panel fixed modes
  drm/i915/sdvo: Robustify the dtd<->drm_mode conversions
  drm/msm: workaround for missing irq
  drm/msm: return -EBUSY if bo still active
  drm/msm: fix return value check in ERR_PTR()
  drm/msm: fix cmdstream size check
  drm/msm: hangcheck harder
  drm/msm: handle read vs write fences
  drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion
  drm/i915: Use proper print format for debug prints
  ...

Pull block IO fixes from Jens Axboe:
 "After merge window, no new stuff this time only a collection of neatly
  confined and simple fixes"

* 'for-3.12/core' of git://git.kernel.dk/linux-block:
  cfq: explicitly use 64bit divide operation for 64bit arguments
  block: Add nr_bios to block_rq_remap tracepoint
  If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up.
  bio-integrity: Fix use of bs->bio_integrity_pool after free
  blkcg: relocate root_blkg setting and clearing
  block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
  block: trace all devices plug operation

Pull btrfs fixes from Chris Mason:
 "These are mostly bug fixes and a two small performance fixes.  The
  most important of the bunch are Josef's fix for a snapshotting
  regression and Mark's update to fix compile problems on arm"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
  Btrfs: create the uuid tree on remount rw
  btrfs: change extent-same to copy entire argument struct
  Btrfs: dir_inode_operations should use btrfs_update_time also
  btrfs: Add btrfs: prefix to kernel log output
  btrfs: refuse to remount read-write after abort
  Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0
  Btrfs: don't leak transaction in btrfs_sync_file()
  Btrfs: add the missing mutex unlock in write_all_supers()
  Btrfs: iput inode on allocation failure
  Btrfs: remove space_info->reservation_progress
  Btrfs: kill delay_iput arg to the wait_ordered functions
  Btrfs: fix worst case calculator for space usage
  Revert "Btrfs: rework the overcommit logic to be based on the total size"
  Btrfs: improve replacing nocow extents
  Btrfs: drop dir i_size when adding new names on replay
  Btrfs: replay dir_index items before other items
  Btrfs: check roots last log commit when checking if an inode has been logged
  Btrfs: actually log directory we are fsync()'ing
  Btrfs: actually limit the size of delalloc range
  Btrfs: allocate the free space by the existed max extent size when ENOSPC
  ...

'samples' is 64bit operant, but do_div() second parameter is 32.
do_div silently truncates high 32 bits and calculated result
is invalid.

In case if low 32bit of 'samples' are zeros then do_div() produces
kernel crash.
Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NFS client bugfix from Trond Myklebust:
 "Fix a regression due to incorrect sharing of gss auth caches"

* tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  RPCSEC_GSS: fix crash on destroying gss auth

Adding the number of bios in a remapped request to 'block_rq_remap'
tracepoint.

Request remapper clones bios in a request to track the completion
status of each bio. So the number of bios can be useful information
for investigation.

Related discussions:
  http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html
  http://www.redhat.com/archives/dm-devel/2013-September/msg00024.htmlSigned-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Users have been complaining of the uuid tree stuff warning that there is no uuid
root when trying to do snapshot operations.  This is because if you mount -o ro
we will not create the uuid tree.  But then if you mount -o rw,remount we will
still not create it and then any subsequent snapshot/subvol operations you try
to do will fail gloriously.  Fix this by creating the uuid_root on remount rw if
it was not already there.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data
back to it's argument struct. Unfortunately, not all architectures provide
__put_user_unaligned(), so compiles break on them if btrfs is selected.

Instead, just copy the whole struct in / out at the start and end of
operations, respectively.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Commit 2bc55652 (Btrfs: don't update atime on
RO subvolumes) ensures that the access time of an inode is not updated when
the inode lives in a read-only subvolume.
However, if a directory on a read-only subvolume is accessed, the atime is
updated. This results in a write operation to a read-only subvolume. I
believe that access times should never be updated on read-only subvolumes.

To reproduce:

 # mkfs.btrfs -f /dev/dm-3
 (...)
 # mount /dev/dm-3 /mnt
 # btrfs subvol create /mnt/sub
 	Create subvolume '/mnt/sub'
 # mkdir /mnt/sub/dir
 # echo "abc" > /mnt/sub/dir/file
 # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap
 	Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap'
 # stat /mnt/rosnap/dir
 	File: `/mnt/rosnap/dir'
 	Size: 8         Blocks: 0          IO Block: 4096   directory
 Device: 16h/22d    Inode: 257         Links: 1
 Access: (0755/drwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
 	Access: 2013-09-11 07:21:49.389157126 -0400
 	Modify: 2013-09-11 07:22:02.330156079 -0400
 	Change: 2013-09-11 07:22:02.330156079 -0400
 # ls /mnt/rosnap/dir
 	file
 # stat /mnt/rosnap/dir
 	File: `/mnt/rosnap/dir'
 	Size: 8         Blocks: 0          IO Block: 4096   directory
 Device: 16h/22d    Inode: 257         Links: 1
 Access: (0755/drwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
 	Access: 2013-09-11 07:22:56.797151670 -0400
 	Modify: 2013-09-11 07:22:02.330156079 -0400
 	Change: 2013-09-11 07:22:02.330156079 -0400
Reported-by: NKoen De Wit <koen.de.wit@oracle.com>
Signed-off-by: NGuangyu Sun <guangyu.sun@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The kernel log entries for device label %s and device fsid %pU
are missing the btrfs: prefix. Add those here.
Signed-off-by: NFrank Holton <fholton@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

It's still possible to flip the filesystem into RW mode after it's
remounted RO due to an abort. There are lots of places that check for
the superblock error bit and will not write data, but we should not let
the filesystem appear read-write.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default
subvolume by passing a subvolume id of 0.
Signed-off-by: Nchandan <chandan@linux.vnet.ibm.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns
a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would
return without ending/freeing the transaction.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The BUG() was replaced by btrfs_error() and return -EIO with the
patch "get rid of one BUG() in write_all_supers()", but the missing
mutex_unlock() was overlooked.

The 0-DAY kernel build service from Intel reported the missing
unlock which was found by the coccinelle tool:

    fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We don't do the iput when we fail to allocate our delayed delalloc work in
__start_delalloc_inodes, fix this.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This isn't used for anything anymore, just remove it.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it.  However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Forever ago I made the worst case calculator say that we could potentially split
into 3 blocks for every level on the way down, which isn't right.  If we split
we're only going to get two new blocks, the one we originally cow'ed and the new
one we're going to split.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This reverts commit 70afa399.  It is causing
performance issues and wasn't actually correct.  There were problems with the
way we flushed delalloc and that was the real cause of the early enospc.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Various people have hit a deadlock when running btrfs/011.  This is because when
replacing nocow extents we will take the i_mutex to make sure nobody messes with
the file while we are replacing the extent.  The problem is we are already
holding a transaction open, which is a locking inversion, so instead we need to
save these inodes we find and then process them outside of the transaction.

Further we can't just lock the inode and assume we are good to go.  We need to
lock the extent range and then read back the extent cache for the inode to make
sure the extent really still points at the physical block we want.  If it
doesn't we don't have to copy it.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So if we have dir_index items in the log that means we also have the inode item
as well, which means that the inode's i_size is correct.  However when we
process dir_index'es we call btrfs_add_link() which will increase the
directory's i_size for the new entry.  To fix this we need to just set the dir
items i_size to 0, and then as we find dir_index items we adjust the i_size.
btrfs_add_link() will do it for new entries, and if the entry already exists we
can just add the name_len to the i_size ourselves.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

A user reported a bug where his log would not replay because he was getting
-EEXIST back.  This was because he had a file moved into a directory that was
logged.  What happens is the file had a lower inode number, and so it is
processed first when replaying the log, and so we add the inode ref in for the
directory it was moved to.  But then we process the directories DIR_INDEX item
and try to add the inode ref for that inode and it fails because we already
added it when we replayed the inode.  To solve this problem we need to just
process any DIR_INDEX items we have in the log first so this all is taken care
of, and then we can replay the rest of the items.  With this patch my reproducer
can remount the file system properly instead of erroring out.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Liu introduced a local copy of the last log commit for an inode to make sure we
actually log an inode even if a log commit has already taken place.  In order to
make sure we didn't relog the same inode multiple times he set this local copy
to the current trans when we log the inode, because usually we log the inode and
then sync the log.  The exception to this is during rename, we will relog an
inode if the name changed and it is already in the log.  The problem with this
is then we go to sync the inode, and our check to see if the inode has already
been logged is tripped and we don't sync the log.  To fix this we need to _also_
check against the roots last log commit, because it could be less than what is
in our local copy of the log commit.  This fixes a bug where we rename a file
into a directory and then fsync the directory and then on remount the directory
is no longer there.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If you just create a directory and then fsync that directory and then pull the
power plug you will come back up and the directory will not be there.  That is
because we won't actually create directories if we've logged files inside of
them since they will be created on replay, but in this check we will set our
logged_trans of our current directory if it happens to be a directory, making us
think it doesn't need to be logged.  Fix the logic to only do this to parent
directories.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So forever we have had this thing to limit the amount of delalloc pages we'll
setup to be written out to 128mb.  This is because we have to lock all the pages
in this range, so anything above this gets a bit unweildly, and also without a
limit we'll happily allocate gigantic chunks of disk space.  Turns out our check
for this wasn't quite right, we wouldn't actually limit the chunk we wanted to
write out, we'd just stop looking for more space after we went over the limit.
So if you do a giant 20gb dd on my box with lots of ram I could get 2gig
extents.  This is fine normally, except when you go to relocate these extents
and we can't find enough space to relocate these moster extents, since we have
to be able to allocate exactly the same sized extent to move it around.  So fix
this by actually enforcing the limit.  With this patch I'm no longer seeing
giant 1.5gb extents.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

By the current code, if the requested size is very large, and all the extents
in the free space cache are small, we will waste lots of the cpu time to cut
the requested size in half and search the cache again and again until it gets
down to the size the allocator can return. In fact, we can know the max extent
size in the cache after the first search, so we needn't cut the size in half
repeatedly, and just use the max extent size directly. This way can save
lots of cpu time and make the performance grow up when there are only fragments
in the free space cache.

According to my test, if there are only 4KB free space extents in the fs,
and the total size of those extents are 256MB, we can reduce the execute
time of the following test from 5.4s to 1.4s.
  dd if=/dev/zero of=<testfile> bs=1MB count=1 oflag=sync

Changelog v2 -> v3:
- fix the problem that we skip the block group with the space which is
  less than we need.

Changelog v1 -> v2:
- address the problem that we return a wrong start position when searching
  the free space in a bitmap.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We want to know if there are debugging features compiled in, this may
affect performance. The message is printed before the sanity checks.

(This commit message is a copy of David Sterba's commit message when
he introduced btrfs_print_info()).
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Instead of removing the current inode from the red black tree
and then add the new one, just use the red black tree replace
operation, which is more efficient.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If replace was suspended by the umount, replace target device is added
to the fs_devices->alloc_list during a later mount.  This is obviously
wrong.  ->is_tgtdev_for_dev_replace is supposed to guard against that,
but ->is_tgtdev_for_dev_replace is (and can only ever be) initialized
*after* everything is opened and fs_devices lists are populated.  Fix
this by checking the devid instead: for replace targets it's always
equal to BTRFS_DEV_REPLACE_DEVID.

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we failed to actually allocate the correct size of the extent to relocate we
will end up in an infinite loop because we won't return an error, we'll just
move on to the next extent.  So fix this up by returning an error, and then fix
all the callers to return an error up the stack rather than BUG_ON()'ing.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Linux 3.11

Pull ACPI and power management fixes from Rafael Wysocki:

 1) Four fixes for cpufreq regressions introduced by the changes that
    removed Device Tree parsing for CPU device nodes from cpufreq
    drivers from Sudeep KarkadaNagesha.

 2) Two fixes for recent cpufreq regressions introduced by changes
    related to the preservation of sysfs attributes over system
    suspend/resume cycles from Viresh Kumar.

 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that
    fails to stop PME polling for devices put into the D3cold power
    state from Rafael J Wysocki.

 4) Fix for bad interactions between cpufreq and udev on systems
    supporting intel_pstate where acpi-cpufreq is available as well
    from Yinghai Lu.

* tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: return EEXIST instead of EBUSY for second registering
  PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
  ARM: shmobile: change dev_id to cpu0 while registering cpu clock
  ARM: i.MX: change dev_id to cpu0 while registering cpu clock
  cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device
  cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device
  cpufreq: unlock correct rwsem while updating policy->cpu
  cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()

Pull vhost updates from Michael Tsirkin:
 "vhost: minor changes on top of 3.12-rc1

  This fixes module loading for vhost-scsi, and tweaks locking in vhost
  core a bit.  Both of these are not exactly release blockers but it's
  early in the cycle so I think it's a good idea to apply them now"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-scsi: whitespace tweak
  vhost/scsi: use vmalloc for order-10 allocation
  vhost: wake up worker outside spin_lock

Don't try to dump the index key that distinguishes an object if netfs
data in the cookie the object refers to has been cleared (ie.  the
cookie has passed most of the way through
__fscache_relinquish_cookie()).

Since the netfs holds the index key, we can't get at it once the ->def
and ->netfs_data pointers have been cleared - and a NULL pointer
exception will ensue, usually just after a:

	CacheFiles: Error: Unexpected object collision

error is reported.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In cachefiles_check_auxdata(), we allocate auxbuf but fail to free it if
we determine there's an error or that the data is stale.

Further, assigning the output of vfs_getxattr() to auxbuf->len gives
problems with checking for errors as auxbuf->len is a u16.  We don't
actually need to set auxbuf->len, so keep the length in a variable for
now.  We shouldn't need to check the upper limit of the buffer as an
overflow there should be indicated by -ERANGE.

While we're at it, fscache_check_aux() returns an enum value, not an
int, so assign it to an appropriately typed variable rather than to ret.
Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Hongyi Jia <jiayisuse@gmail.com>
cc: Milosz Tanski <milosz@adfin.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>