Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
the platforms that have had new targets added recently and move them over.

While I was at it, I also made the dtb generation more generic, i.e. if
the platform is enabled then all dtbs for that platform will be created.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brown <davidb@codeaurora.com>
Cc: Barry Song <Baohua.Song@csr.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>

Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform

Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.

Multi-platform support is dependent on mach/gpio.h removal and
restructuring of DEBUG_LL and dtb build rules included in this branch.

This has been built for all defconfigs, and booted on highbank with
all 5 platforms enabled.

By Rob Herring (18) and Arnd Bergmann (1)
via Rob Herring
* tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux:
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ARM: orion: move custom gpio functions to orion-gpio.h
  ARM: shmobile: move custom gpio functions to sh-gpio.h
  ARM: pxa: use gpio_to_irq for sharppm_sl
  net: pxaficp_ir: add irq resources
  usb: pxa27x_udc: remove IRQ_USB define
  staging: ste_rmi4: remove gpio.h include

Conflicts due to addition of bcm2835 and removal of pnx4008 in:
	arch/arm/Kconfig
	arch/arm/Makefile

Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in:
	arch/arm/mach-imx/Makefile.boot
	arch/arm/mach-mxs/Makefile.boot
	arch/arm/mach-tegra/Makefile.boot
Signed-off-by: NOlof Johansson <olof@lixom.net>

* next/soc: (50 commits)
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ARM: tegra30: add CPU hotplug support
  ARM: tegra: clean up the common assembly macros into sleep.h
  ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops
  ARM: tegra: introduce tegra_cpu_car_ops structures
  ARM: Tegra: Add smp_twd clock for Tegra20
  ARM: AM33XX: clock: Add dcan clock aliases for device-tree
  ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions
  ARM: OMAP: omap_device: idle devices with no driver bound
  ARM: OMAP: omap_device: don't attempt late suspend if no driver bound
  ARM: OMAP: omap_device: keep track of driver bound status
  ARM: OMAP3+: hwmod: Add AM33XX HWMOD data
  ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework
  ...

Change/remove conflict in arch/arm/mach-ux500/clock.c resolved.
Signed-off-by: NOlof Johansson <olof@lixom.net>

* next/dt: (182 commits)
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: dt: tegra: whistler: configure power off
  ARM: mxs: m28evk: Disable OCOTP OUI loading
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx23-olinuxino: Add USB host support
  ARM: dts: imx6q-sabrelite: add usbmisc device
  ARM: dts: mx23: Add USB resources
  ARM: dts: mxs: Add ethernetX to macX aliases
  ARM: msm: Remove non-DT targets from 8960
  ARM: msm: Add DT support for 8960
  ARM: msm: Move io mapping prototypes to common.h
  ARM: msm: Rename board-msm8x60 to signify its DT only status
  ARM: msm: Make 8660 a DT only target
  ARM: msm: Move 8660 to DT timer
  ARM: msm: Add DT support to msm_timer
  ...

* next/cleanup: (358 commits)
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
  ARM: OMAP2+: Make ctrl_module_core_44xx.h local
  ...

Merge tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
This branch contains mostly scripted changes to make omap
header files local where possible to get us closer to supporting
the ARM single zImage. After these changes mach includes are
pretty much out of the way for omap2+, but still lots of manual
work remains to sort through the remaining plat includes.

* tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
  ARM: OMAP2+: Make ctrl_module_core_44xx.h local
  ARM: OMAP2+: Make board-rx51.h local
  ...

From Shawn Guo:
This is the second round of imx-dt patches for 3.7.  It's based on
and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled.

* tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx6q-sabrelite: add usbmisc device

From Shawn Guo:
This is the second round of mxs-dt patches for 3.7.  It's based on
mxs-dt-3.7 and mxs-clk-dt-lookup which have been pulled into arm-soc.

* tag 'mxs-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: m28evk: Disable OCOTP OUI loading
  ARM: dts: imx23-olinuxino: Add USB host support
  ARM: dts: mx23: Add USB resources
  ARM: dts: mxs: Add ethernetX to macX aliases

Merge tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

ARM: tegra: switch to dmaengine

The Tegra code-base has contained both a legacy DMA and a dmaengine
driver since v3.6-rcX. This series flips Tegra's defconfig to enable
dmaengine rather than the legacy driver, and removes the legacy driver
and all client code.

* tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ASoC: tegra: remove support of legacy DMA driver based access
  spi: tegra: remove support of legacy DMA driver based access
  ARM: tegra: apbio: remove support of legacy DMA driver based access
  ARM: tegra: dma: remove legacy APB DMA driver
  ARM: tegra: config: enable dmaengine based APB DMA driver
  + sync to 3.6-rc6

On Harmony, LDO7 does not feed vdd_fuse. Correct the regulator name.
This issue was probably the result of copying Ventana's regulator setup
when creating the Harmony .dts file. No other naming issues appear to
exist.
Reported-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt

ARM: tegra: second round of device tree changes

This branch includes some late device tree changes for Tegra:

A property is added to Whistler's device tree to enable the PMIC to
act as the pm_power_off() implementation.

A number of new device tree are added for boards from Avionic Design.

* tag 'tegra-for-3.7-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: dt: tegra: whistler: configure power off

Merge tag 'rpi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/soc

ARM: add basic BCM2835 SoC and Raspberry Pi board support

The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic
support for this SoC; enough to boot the system into an initrd with
UART console, interrupt controller, timers, and a stub clock driver.

Also provided is a similarly basic device tree for the Raspberry Pi
Model B board.

This series was written by Simon Arlott, Chris Boot, and Dom Cobley
downstream, with reference to a Broadcom tree, and modified for upstream
and submitted by Stephen Warren.

* tag 'rpi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi

Merge branch 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:

Since there are many changes for gpio-samsung in my tree, this has been
included in my tree with Linus' agreement.

* 'next/gpio-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  gpio: samsung: add devicetree init for s3c24xx arches

From Kukjin Kim:

Here, there are cleanup patches for Samsung v3.7 and most of them are
related to cleanup Samsung specific gpio API.

* samsung/cleanup:
  gpio: samsung: Update documentation
  ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c
  ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c
  gpio-samsung: Remove now unused s3c2410_gpio* API
  ARM: S3C24XX: Remove obsolete GPIO API declarations
  ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API
  ARM: EXYNOS: cleanup unused code related to GPS

AM33xx hwmod data includes "mcspi.h" which has now been moved after
the platform_data move.  Fix it.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is only used by omap1.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This can be local to mach-omap2.
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is only used by omap1.

And to fix things properly, this should not be included
from the drivers at all.
Acked-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Cc: linux-mtd@lists.infradead.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: NTony Lindgren <tony@atomide.com>

We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: NTony Lindgren <tony@atomide.com>

This is no longer needed.
Signed-off-by: NTony Lindgren <tony@atomide.com>