- 05 7月, 2011 5 次提交
-
-
由 Yaniv Rosner 提交于
When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Add hardware PHY reset action for BCM578xx when fan failure occur. The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Add CL37 BAM support according to configuration. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2011 1 次提交
-
-
由 Jon Mason 提交于
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: NJon Mason <jdmason@kudzu.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2011 23 次提交
-
-
由 Vladislav Zolotarov 提交于
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Add supoprt for 3 COSes for 578xx devices. Fix HW configuration for PFC feature according to new HSI in link layer. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Vladislav Zolotarov 提交于
- Added support for a parity error handling for a 57712 chip. - Changed the parity recovery scheme from per-chip to per-engine. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Vlad Zolotarov 提交于
New FW/HSI (7.0): - Added support to 578xx chips - Improved HSI - much less driver's direct access to the FW internal memory needed. New implementation of the HSI handling layer in the bnx2x (bnx2x_sp.c): - Introduced chip dependent objects that have chip independent interfaces for configuration of MACs, multicast addresses, Rx mode, indirection table, fast path queues and function initialization/cleanup. - Objects functionality is based on the private function pointers, which allows not only a per-chip but also PF/VF differentiation while still preserving the same interface towards the driver. - Objects interface is not influenced by the HSI changes which do not require providing new parameters keeping the code outside the bnx2x_sp.c invariant with regard to such HSI chnages. Changes in a CNIC, bnx2fc and bnx2i modules due to the new HSI. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Vladislav Zolotarov 提交于
Moved the HSI dependent slow path code to a separate file. Currently it contains the implementation of MACs, Rx mode, multicast addresses, indirection table, fast path queue and function configuration code. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Yaniv Rosner 提交于
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
It's not needed any more since device always operates in interrupt-driven mode Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2011 9 次提交
-
-
由 Yaniv Rosner 提交于
Instead of setting CL45 mode for every CL45 access, apply it once during initialization. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Modify XGXS functions to follow rest of PHY scheme. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Fix link status synchronization between the primary function, and rest functions. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Move BCM8726 module detection code into a separate function to be called only once during initialization. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
This patch relocates some functions as a preparation for next patches, and also fixes some grammar mistakes. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Fix BCM84833 register settings. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
On 57712 chip, port number is enumerated per engine, so it requires adjustment in port display to the user. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
In case TX fault is detected on Fiber PHYs, declare the link as down until TX fault is gone. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Change return status from u8 to int. Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-