Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 26 7月, 2008 16 次提交
  3. 25 7月, 2008 16 次提交
    • U
      flag parameters: NONBLOCK in pipe · be61a86d
      由 Ulrich Drepper 提交于 
      This patch adds O_NONBLOCK support to pipe2.  It is minimally more involved
than the patches for eventfd et.al but still trivial.  The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fds[2];
  if (syscall (__NR_pipe2, fds, 0) == -1)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (fl & O_NONBLOCK)
        {
          printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
    {
      puts ("pipe2(O_NONBLOCK) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int fl = fcntl (fds[i], F_GETFL);
      if (fl == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((fl & O_NONBLOCK) == 0)
        {
          printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
          return 1;
        }
      close (fds[i]);
    }

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      be61a86d
    • U
      flag parameters: inotify_init · 4006553b
      由 Ulrich Drepper 提交于 
      This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before).  The
values accepted for this parameter are function-specific and defined in the
inotify.h header.  Here the values must match the O_* flags, though.  In this
patch CLOEXEC support is introduced.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("inotify_init1(0) set close-on-exit");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4006553b
    • U
      flag parameters: eventfd · b087498e
      由 Ulrich Drepper 提交于 
      This patch adds the new eventfd2 syscall.  It extends the old eventfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("eventfd2(0) sets close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b087498e
    • U
      flag parameters: signalfd · 9deb27ba
      由 Ulrich Drepper 提交于 
      This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9deb27ba
    • U
      flag parameters: paccept · aaca0bdc
      由 Ulrich Drepper 提交于 
      This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      aaca0bdc
    • U
      generic irqs: handle failure of irqchip->set_type in setup_irq · 82736f4d
      由 Uwe Kleine-König 提交于 
      set_type returns an int indicating success or failure, but up to now
setup_irq ignores that.

In my case this resulted in a machine hang:

gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but
arm/ns9xxx can only trigger on one direction so set_type didn't touch
the configuration which happens do default to a level sensitiveness and
returned -EINVAL.  setup_irq ignored that and unmasked the irq.  This
resulted in an endless triggering of the gpio-key interrupt service
routine which effectively killed the machine.

With this patch applied setup_irq propagates the error to the caller.

Note that before in the case

	chip && !chip->set_type && !chip->name

a NULL pointer was feed to printk.  This is fixed, too.
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      82736f4d
    • D
      pm: fix try_to_freeze_tasks()'s use of do_div() · f0af566d
      由 David Howells 提交于 
      Fix try_to_freeze_tasks()'s use of do_div() on an s64 by making
elapsed_csecs64 a u64 instead and dividing that.

Possibly this should be guarded lest the interval calculation turn up
negative, but the possible negativity of the result of the division is
cast away anyway.

This was introduced by patch 438e2ce6.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f0af566d
    • Z
      pm: schedule sysrq poweroff on boot cpu · 2f15fc4b
      由 Zhang Rui 提交于 
      schedule sysrq poweroff on boot cpu.

sysrq poweroff needs to disable nonboot cpus, and we need to run this on boot
cpu to avoid any recursion.  http://bugzilla.kernel.org/show_bug.cgi?id=10897

[kosaki.motohiro@jp.fujitsu.com: build fix]
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Tested-by: NRus <harbour@sfinx.od.ua>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2f15fc4b
    • Z
      pm: introduce new interfaces schedule_work_on() and queue_work_on() · c1a220e7
      由 Zhang Rui 提交于 
      This interface allows adding a job on a specific cpu.

Although a work struct on a cpu will be scheduled to other cpu if the cpu
dies, there is a recursion if a work task tries to offline the cpu it's
running on.  we need to schedule the task to a specific cpu in this case.
http://bugzilla.kernel.org/show_bug.cgi?id=10897

[oleg@tv-sign.ru: cleanups]
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Tested-by: NRus <harbour@sfinx.od.ua>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c1a220e7
    • A
      pm: hibernation: simplify memory bitmap · 0d83304c
      由 Akinobu Mita 提交于 
      This patch simplifies the memory bitmap manipulations.

- remove the member size in struct bm_block

It is not necessary for struct bm_block to have the number of bit chunks that
can be calculated by using end_pfn and start_pfn.

- use find_next_bit() for memory_bm_next_pfn

No need to invent the bitmap library only for the memory bitmap.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0d83304c
    • D
      pm: boot time suspend selftest · 77437fd4
      由 David Brownell 提交于 
      Boot-time test for system suspend states (STR or standby).  The generic
RTC framework triggers wakeup alarms, which are used to exit those states.

  - Measures some aspects of suspend time ... this uses "jiffies" until
    someone converts it to use a timebase that works properly even while
    timer IRQs are disabled.

  - Triggered by a command line parameter.  By default nothing even
    vaguely troublesome will happen, but "test_suspend=mem" will give
    you a brief STR test during system boot.  (Or you may need to use
    "test_suspend=standby" instead, if your hardware needs that.)

This isn't without problems.  It fires early enough during boot that for
example both PCMCIA and MMC stacks have misbehaved.  The workaround in
those cases was to boot without such media cards inserted.

[matthltc@us.ibm.com: fix compile failure in boot time suspend selftest]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      77437fd4
    • P
      swsusp: provide users with a hint about the no_console_suspend option · 0d63081d
      由 Pavel Machek 提交于 
      Tell the user about the no_console_suspend option, so that we don't have to
tell each bug reporter personally.

[akpm@linux-foundation.org: clarify the text a little]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0d63081d
    • A
      security: filesystem capabilities refactor kernel code · ab763c71
      由 Andrew G. Morgan 提交于 
      To date, we've tried hard to confine filesystem support for capabilities
to the security modules.  This has left a lot of the code in
kernel/capability.c in a state where it looks like it supports something
that filesystem support for capabilities actually suppresses when the LSM
security/commmoncap.c code runs.  What is left is a lot of code that uses
sub-optimal locking in the main kernel

With this change we refactor the main kernel code and make it explicit
which locks are needed and that the only remaining kernel races in this
area are associated with non-filesystem capability code.
Signed-off-by: NAndrew G. Morgan <morgan@kernel.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ab763c71
    • A
      hugetlb: multiple hstates for multiple page sizes · e5ff2159
      由 Andi Kleen 提交于 
      Add basic support for more than one hstate in hugetlbfs.  This is the key
to supporting multiple hugetlbfs page sizes at once.

- Rather than a single hstate, we now have an array, with an iterator
- default_hstate continues to be the struct hstate which we use by default
- Add functions for architectures to register new hstates

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e5ff2159
    • M
      hugetlb: reserve huge pages for reliable MAP_PRIVATE hugetlbfs mappings until fork() · a1e78772
      由 Mel Gorman 提交于 
      This patch reserves huge pages at mmap() time for MAP_PRIVATE mappings in
a similar manner to the reservations taken for MAP_SHARED mappings.  The
reserve count is accounted both globally and on a per-VMA basis for
private mappings.  This guarantees that a process that successfully calls
mmap() will successfully fault all pages in the future unless fork() is
called.

The characteristics of private mappings of hugetlbfs files behaviour after
this patch are;

1. The process calling mmap() is guaranteed to succeed all future faults until
   it forks().
2. On fork(), the parent may die due to SIGKILL on writes to the private
   mapping if enough pages are not available for the COW. For reasonably
   reliable behaviour in the face of a small huge page pool, children of
   hugepage-aware processes should not reference the mappings; such as
   might occur when fork()ing to exec().
3. On fork(), the child VMAs inherit no reserves. Reads on pages already
   faulted by the parent will succeed. Successful writes will depend on enough
   huge pages being free in the pool.
4. Quotas of the hugetlbfs mount are checked at reserve time for the mapper
   and at fault time otherwise.

Before this patch, all reads or writes in the child potentially needs page
allocations that can later lead to the death of the parent.  This applies
to reads and writes of uninstantiated pages as well as COW.  After the
patch it is only a write to an instantiated page that causes problems.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NAdam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a1e78772
    • A
      mm/vmstat.c: proper externs · c748e134
      由 Adrian Bunk 提交于 
      This patch adds proper extern declarations for five variables in
include/linux/vmstat.h
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c748e134
  5. 24 7月, 2008 3 次提交
  7. 23 7月, 2008 3 次提交
  9. 22 7月, 2008 2 次提交