- 06 7月, 2005 27 次提交
-
-
由 David S. Miller 提交于
It reimplements portions of tcp_snd_check(), so it we move it to tcp_output.c we can consolidate it's logic much easier in a later change. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This just moves the code into tcp_output.c, no code logic changes are made by this patch. Using this as a baseline, we can begin to untangle the mess of comparisons for the Nagle test et al. We will also be able to reduce all of the redundant computation that occurs when outputting data packets. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
On each packet output, we call tcp_dec_quickack_mode() if the ACK flag is set. It drops tp->ack.quick until it hits zero, at which time we deflate the ATO value. When doing TSO, we are emitting multiple packets with ACK set, so we should decrement tp->ack.quick that many segments. Note that, unlike this case, tcp_enter_cwr() should not take the tcp_skb_pcount(skb) into consideration. That function, one time, readjusts tp->snd_cwnd and moves into TCP_CA_CWR state. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The ideal and most optimal layout for an SKB when doing scatter-gather is to put all the headers at skb->data, and all the user data in the page array. This makes SKB splitting and combining extremely simple, especially before a packet goes onto the wire the first time. So, when sk_stream_alloc_pskb() is given a zero size, make sure there is no skb_tailroom(). This is achieved by applying SKB_DATA_ALIGN() to the header length used here. Next, make select_size() in TCP output segmentation use a length of zero when NETIF_F_SG is true on the outgoing interface. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
I suspect "#define __ARGS(x) ()" was deprecated before I was born. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Chau 提交于
A trivial patch to improve the readability of dev_set_promiscuity() in net/core/dev.c. New code does exactly the same thing as original code. Signed-off-by: NDavid Chau <ddcc@mit.edu> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
Dave, you were right and the sleeping locks in shaper were broken. Markus Kanet noticed this and also tested the patch below that switches locking to spinlocks. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Olsson 提交于
Below a patch to preallocate memory when doing resize of trie (inflate halve) If preallocations fails it just skips the resize of this tnode for this time. The oops we got when killing bgpd (with full routing) is now gone. Patrick memory patch is also used. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- rt_check_expire() fixes (an overflow occured if size of the hash was >= 65536) reminder of the bugfix: The rt_check_expire() has a serious problem on machines with large route caches, and a standard HZ value of 1000. With default values, ie ip_rt_gc_interval = 60*HZ = 60000 ; the loop count : for (t = ip_rt_gc_interval << rt_hash_log; t >= 0; overflows (t is a 31 bit value) as soon rt_hash_log is >= 16 (65536 slots in route cache hash table). In this case, rt_check_expire() does nothing at all Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- rt hash table allocated using alloc_large_system_hash() function. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- Locking abstraction - Spinlocks moved out of rt hash table : Less memory (50%) used by rt hash table. it's a win even on UP. - Sizing of spinlocks table depends on NR_CPUS Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Inflating a node a couple of times makes it exceed the 128k kmalloc limit. Use __get_free_pages for allocations > PAGE_SIZE, as in fib_hash. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NRobert Olsson <Robert.Olsson@data.slu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for ethtool -C with verification of user parameters. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Makes IPv4 ip_rcv registration happen last in af_inet. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Missing PCI_REV_DESC define. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Current behaviour is to not report an error if a rate estimator is created together with a qdisc and the configuration of the rate estimator is bogus. This leads to unexpected behaviour because the user is not notified. New behaviour is to report the error and let the whole qdisc creation operation fail so the user is able to fix his mistake. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds qdisc_alloc() to share code between qdisc_create() and qdisc_create_dflt(). Hides the qdisc alignment behind macros and makes use of them. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Reduce local_df to a bit field and ip_summed to a 2 bits field thus saving 13 bits. Move bit fields, packet type, and protocol into the spare area between the priority and the destructor. Saves 4 bytes on both, 32bit and 64bit architectures. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As suggested by Herbert Xu: Since we don't require anything to be in the linear packet range anymore make len cover the entire packet. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
skb_header_pointer handles linear and non-linear data, no need to handle linear data again. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
This is the code to load packet data into a register: k = fentry->k; if (k < 0) { ... } else { u32 _tmp, *p; p = skb_header_pointer(skb, k, 4, &_tmp); if (p != NULL) { A = ntohl(*p); continue; } } skb_header_pointer checks if the requested data is within the linear area: int hlen = skb_headlen(skb); if (offset + len <= hlen) return skb->data + offset; When offset is within [INT_MAX-len+1..INT_MAX] the addition will result in a negative number which is <= hlen. I couldn't trigger a crash on my AMD64 with 2GB of memory, but a coworker tried on his x86 machine and it crashed immediately. This patch fixes the check in skb_header_pointer to handle large positive offsets similar to skb_copy_bits. Invalid data can still be accessed using negative offsets (also similar to skb_copy_bits), anyone using negative offsets needs to verify them himself. Thanks to Thomas Vögtle <thomas.voegtle@coreworks.de> for verifying the problem by crashing his machine and providing me with an Oops. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2005 9 次提交
-
-
由 Russell King 提交于
Add __attribute__((packed)) to ensure that the stat64 structure is correctly laid out no matter which ABI the kernel is compiled for. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
These didn't match my sed expression correctly, fix them up manually. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Russell King 提交于
Initialise the spinlock for port being used by the console early, but don't re-initialise it again later. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The range for the ARMv6 block cache operations is inclusive but the kernel doesn't re-calculate the end address, causing a page fault when used (this only happens with support for cache aliasing, otherwise the blk_flush_kern_dcache_page() is not called). This patch subtracts L1_CACHE_BYTES from the end address. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The request_irq() function is called by s3c24xx uart driver with the local IRQs disabled. The request_irq() function can allocate memory via kmalloc(), and this may sleep causing a warning about sleeping in an invalid context. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 7月, 2005 4 次提交
-
-
由 Adrian Bunk 提交于
This patch kills the dead CONFIG_BLK_DEV_IDE_TCQ entry. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
由 Rob Punkunus 提交于
From: Rob Punkunus <rpunkunus@nvidia.com> Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in the amd74xx driver. This patch was whitespace-corrupted and didn't apply to 2.6.12 since MCP51 support was merged in the 2.6.12-rc series. Gentoo would like to support this hardware for our upcoming release media, so I fixed the patch, and here it is :) Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
由 Denis Vlasenko 提交于
From: Denis Vlasenko <vda@ilport.com.ua> * printk("\n") is misplaced, resulting in stray empty line in kernel log * cleanups nerby: some back-to-back printks are combined, etc Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
由 Herbert Xu 提交于
From: Herbert Xu <herbert@gondor.apana.org.au> mark the __init section __devinit. Splitted up from the Debian kernel patch. Signed-off-by: Nmaximilian attems <janitor@sternwelten.at> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-