Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: corrected register offset shift
v3: rebase fixes
v4: fix firmware paths
    add SI smc firmware versions for sysfs dump
    remove unused function forward define
    fix the tahiti specific value of DEEP_SLEEP_CLK_SEL field
    fix to miss adding thermal controller
    use vram_type instead of checking mem_gddr5 flag
    fix incorrect index of CG_FFCT_0 register
    fix incorrect reading method at si_get_current_pcie_speed
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: renamed _atom_ to _atombios_ for consistency
    added ulClockParams to _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 and
    _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 to avoid build break
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v3: guard doorbell_fini as well
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds pcie port read/write entry, because it will be also
used on si dpm part.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v5: rebase fixes
v6: add mgcg arrays
v7: rebase fixes
v8: rebase fixes
v9: add get_disabled_bios(), make get_xclk static
v10: fix oland and hainan asic specific handle at si_program_aspm
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v4: rebase fixes
v5: use the generic nop fill
v6: rebase fixes
v7: rebase fixes
    copy count fixes from Jonathan
    general cleanup
    add fill buffer implementation
v8: adapt write_pte and copy_pte to latest changes
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v5: rebase fixes
v6: rebase fixes
v7: rebase fixes
    fix tile reg offset as noticed by Jonathan
    Drop some debugging remnants
v8: add gfx v6 firmware versions for sysfs dump
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v3: white space fixes
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v4: rebase fixups
v5: more fixes based on dce8 code
v6: squash in dmif offset fix
v7: rebase fixups
v8: rebase fixups, drop some debugging remnants
v9: fix BE build
v10: include Marek's tiling fixes, add support for
     page_flip_target, set MASTER_UDPATE_MODE=0,
     fix cursor
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v3: rebase fixups
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v4: rebase fixups
v5: rebase fixups
v5: rebase fixups
v6: rebase fixups for gart size changes
v7: add gmc v6 firmware versions for sysfs dump
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v4: drop unused DCE6 macro
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sync switch buffer scheme with windows kmd for gfx v8,
step1: append a switch_buffer to the end of CS

v2:rebase on latest staging
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If treating warnings as errors this causes a build error
Signed-off-by: NJordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only load the SDMA0/MEC1 firmware once in the Carrizo SMU manager
driver.

(v2) Avoid loading SDMA0 twice too.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove an errant return in the middle of the check
function as well as check for success in the start
function.

(v2) Add return check to smu_load_fw()
(v3) Don't return early if SMU load check fails
(v4) No returns!  :-)
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The old mechanism used a per-submission limit that didn't take previous
submissions within the same time frame into account. It also filled VRAM
slowly when VRAM usage dropped due to a big eviction or buffer deallocation.

This new method establishes a configurable MBps limit that is obeyed when
VRAM usage is very high. When VRAM usage is not very high, it gives
the driver the freedom to fill it quickly. The result is more consistent
performance.

It can't keep the BO move rate low if lots of evictions are happening due
to VRAM fragmentation, or if a big buffer is being migrated.

The amdgpu.moverate parameter can be used to set a non-default limit.
Measurements can be done to find out which amdgpu.moverate setting gives
the best results.

Mainly APUs and cards with small VRAM will benefit from this. For F1 2015,
anything with 2 GB VRAM or less will benefit.

Some benchmark results - F1 2015 (Tonga 2GB):

Limit      MinFPS AvgFPS
Old code:  14     32.6
128 MB/s:  28     41
64 MB/s:   15.5   43
32 MB/s:   28.7   43.4
8 MB/s:    27.8   44.4
8 MB/s:    21.9   42.8 (different run)

Random drops in Min FPS can still occur (due to fragmented VRAM?), but
the average FPS is much better. 8 MB/s is probably a good limit for this
game & the current VRAM management. The random FPS drops are still to be
tackled.

v2: use a spinlock
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Various minor formatting changes.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If init fails free up any allocated memory.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If one of the entries fails to be allocated then free
all of the previous entries before freeing the array which
holds their pointers.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

uvd dpm will be controlled by uvd.
dpm just disable uvd dpm in case of suspend when play video.
due to the new logic of uvd_begin_use/end_use,
if disable uvd dpm in late init, will have no chance to
enable uvd dpm after resume until play video again.

Change-Id: I70e3d7efe63edad37f26e6c5ea089da1135c0ab5
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

delete the members not needed when amd_powerplay_init.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sub_vendor_id in cgs interface.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix issue that encode test failed on the second time when
vce dpm enabled on tonga.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix issue after vce encode, the eclk stay high.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not of much use at the moment (we don't really use
the second ring either), but may be useful later.
Reviewed-by: NJimQu <Jim.Qu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rather than using a hardcoded value.  This allows
different versions to expose more or less rings.

No functional change.
Reviewed-by: NJimQu <Jim.Qu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The old names were dragged over from radeon.  The new ones
better match the naming conventions used in the driver.

No functional change.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Try to be clean here, even when it's a noop on x86.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also use the firmware size from the header instead of calculating it.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>