This reverts commit 33f00dce.

    While it was a good idea to try to use the mm/vmalloc.c allocator instead
    of our own (in fact, ours is itself a dup on an old variant of the vmalloc
    one), unfortunately, the approach is terminally busted since
    dma_alloc_coherent() can be called at interrupt time or in atomic contexts
    and there's little chances we'll make the code in mm/vmalloc.c cope with\       that :-(

    Until we can get the generic code to forbid that idiocy and fix all
    drivers abusing it, we pretty much have no choice but revert to
    our custom virtual space allocator.

    There's also a problem with SMP safety since freeing such mapping
    would require an IPI which cannot be done at interrupt time.

    However, right now, I don't think we support any platform that is
    both SMP and has non-coherent DMA (don't laugh, I know such things
    do exist !) so we can sort that out later.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The recent rework of the MMU PID handling for non-hash CPUs has a
subtle bug in the !SMP "optimized" variant of the PID stealing
function.  It clears the PID in the mm context before it calls
local_flush_tlb_mm(). However, the later will not flush anything
if the PID in the context is clear...
Signed-off-by: NHideo Saito <hsaito.ppc@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Something in the HW or FW setup is busted and MSIs aren't working with
IPR on Bimini, so until we figure out exaxtly what's up, we quirk them
out
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I don't think anything guarantees that the objects in data.page_aligned
are a multiple of PAGE_SIZE, thus the section may end on any boundary.

So the following section, .data.cacheline_aligned needs an explicit
alignment.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Refresh and set these options:

 CONFIG_SYSFS_DEPRECATED_V2: y -> n
 CONFIG_INPUT_JOYSTICK:      y -> n
 CONFIG_HID_SONY:            n -> m
 CONFIG_RTC_DRV_PS3:         - -> m
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function
graph tracer broke. This was discovered on my x86 boxes.

The issue is that gcc used the same register for an output as it did for
an input in an asm statement. I first thought this was a bug in gcc and
reported it. I was notified that gcc was correct and that the output had
to be flagged as an "early clobber".

I noticed that powerpc had the same issue and this patch fixes it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when #DEBUG
is not defined. That's not really desirable in the ftrace code
which we want to be snappy.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text	   data	    bss	    dec	    hex	filename
   3334	    672	      4	   4010	    faa	arch/powerpc/kernel/ftrace.o

size after:
   text	   data	    bss	    dec	    hex	filename
   2616	    360	      4	   2980	    ba4	arch/powerpc/kernel/ftrace.o
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With CONFIG_DEBUG_VM, an assertion is made when changing the protection
flags of a PTE that the PTE is locked. Huge pages use a different pagetable
format and the assertion is bogus and will always trigger with a bug looking
something like

 Unable to handle kernel paging request for data at address 0xf1a00235800006f8
 Faulting instruction address: 0xc000000000034a80
 Oops: Kernel access of bad area, sig: 11 [#1]
 SMP NR_CPUS=32 NUMA Maple
 Modules linked in: dm_snapshot dm_mirror dm_region_hash
  dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic
  pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid
  windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor
  windfarm_cpufreq_clamp windfarm_core i2c_powermac
 NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003
 REGS: c000000003037600 TRAP: 0300   Not tainted (2.6.30-rc3-autokern1)
 MSR: 9000000000009032 <EE,ME,IR,DR>  CR: 28002484  XER: 200fffff
 DAR: f1a00235800006f8, DSISR: 0000000040010000
 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2
 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500
 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001
 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8
 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000
 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20
 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000
 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8
 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880
 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0
 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
 Call Trace:
 [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable)
 [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674
 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8
 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828
 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584
 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c
 Instruction dump:
 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4
 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000

This patch fixes the problem by not asseting the PTE is locked for VMAs
backed by huge pages.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.

First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).

Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.

This fixes this by doing these two things:

 - The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too

 - We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.

This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.

We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.

Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.

We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.
Signed-off-by: NGerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We're currently choking on mem=4g (and above) due to memory_limit
being specified as an unsigned long. Make memory_limit
phys_addr_t to fix this.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map.  However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0).  This causes us to always call
irq_find_mapping() from mpic_get_irq().

By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.

Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>").  In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt.  But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address.  With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP.  But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information.  Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions.  The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.
Signed-off-by: NMaynard Johnson <maynardj@us.ibm.com>
Signed-off-by: NMichael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 4fc665b8 "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails.  Change this to
"unsigned int".
Signed-off-by: NTimur Tabi <timur@freescale.com>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The interrupt controller was not handling level interrupts correctly
such that duplicate interrupts were happening. This fixes the problem
and adds edge type interrupts which are needed in Xilinx hardware.
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

It is common to use U-Boot on Xilinx Virtex platforms.  This patch
ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Fix this build error when CONFIG_BLOCK is not set:
drivers/cdrom/viocd.c: In function 'viocd_blk_open':
drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_release':
drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl':
drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed':
drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type
...
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

commit b31a1d8b ("gianfar: Convert
gianfar to an of_platform_driver"), possibly due merge issues,
reintroduced completely unneded mpc83xx_wdt_init call, which
I removed some time ago in commit 20d38e01
("powerpc/fsl_soc: remove mpc83xx_wdt code").

Remove it once again.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some drivers using of_register_platform_driver() wrapper break on sparc
because the wrapper isn't in the header file.  This patch moves it from
Microblaze and PowerPC implementations and makes it common code.

Fixes this sparc64 allmodconfig build error (at least):

drivers/leds/leds-gpio.c: In function `gpio_led_init':
drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver'
drivers/leds/leds-gpio.c: In function `gpio_led_exit':
drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver'
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 2657dd4e introduced a
bug where we would now always override the "real" oprofile CPU
type with the "compatible" one provided by a pseudo-PVR in the
device-tree which is incorrect and breaks oprofile on all current
configs since the "compatible" ones aren't yet recognized.

This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Oprofile is changing the naming it is using for the compatibility modes.
Instead of having compat-power<x>, oprofile will go to family naming
convention and use ibm-compat-v<x>.  Currently only ibm-compat-v1 will
be defined.
The notion of compatibility events just started with POWER6. So there is
no way that any other tool could exist that is using these
oprofile_cpu_type strings we want to change.
Signed-off-by: NMike Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit edada399 broke the build on 64-bit powerpc because it moved the
__ftr_alt_* sections of a file away from the .text section, causing
link failures due to relative conditional branch targets being too far
away from the branch instructions.  This happens on pretty much all
64-bit powerpc configs.

This change reverts commit edada399 while preserving the update from
the *.refok sections to .ref.text that has happened since.
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Requested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the PS3 smp.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop'
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here
Reported-by: NSubrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not
select PCI. This can lead to a config with the former and the latter
disabled, which does not build.

To fix this PPC_CELL_NATIVE should select PCI. However, that would
force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So
instead move the select of PPC_OF_PLATFORM_PCI and PCI under both
IBM_CELL_BLADE and CELLEB.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries
because old toolchains had bugs where they didn't mark program
segments executable that needed to be.  For some reason we didn't do
this on ppc32 builds.  This hadn't been an issue until commit 8d30c14c
("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side
effect that we are now enforcing execute permissions to some extent on
32-bit 4xx and Book E processors.

This fixes it by defining elf_read_implies_exec on 32-bit to turn on
the read-implies-exec behaviour on programs that are sufficiently old
that they don't have a PT_GNU_STACK program header.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The section .text.init.refok is deprecated and __REF (.ref.text)
should be used in assembly files instead.  This patch cleans up a few
uses of .text.init.refok in the powerpc architecture.
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rather than adding .ref.text to the powerpc linker script so that we
can use __REF on the powerpc architecture, it seems simpler to switch
to using the generic TEXT_TEXT macro.
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: NTim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some U-Boot versions incorrectly set the number of chipselects to two
for Sequoia/Rainier boards while they only have one chipselect hardwired.
This patch adds a workaround for this, hardcoding the number of chipselects
to one for sequioa/rainer board models and reading the actual value from
the memory controller register DDR0_10 otherwise.

It also fixes another error in the way ibm4xx_denali_fixup_memsize
calculates memory size. When testing the DDR_REDUC bit, the polarity is
backwards.  A "1" implies 32-bit wide memory while a "0" implies 64-bit
wide memory.
Signed-off-by: NMikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: NSteven A. Falco <sfalco@harris.com>
Acked-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Previous gcc versions didn't notice this because one of the preceding
#ifs always evaluated to true.

gcc 4.4.0 produced this error:

arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>