Change the CONFIG_X86_EXTENDED_PLATFORM help text to display the
32bit/64bit extended platform list. This is as suggested by Ingo.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Cc: shai@scalex86.org
Cc: "Benzi Galili (Benzi@ScaleMP.com)" <benzi@scalemp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the sysdev_suspend/resume from the callee to the callers, with
no real change in semantics, so that we can rework the disabling of
interrupts during suspend/hibernation.

This is based on an earlier patch from Linus.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now nobody cares, but the suspend/resume code will eventually want
to suspend device interrupts without suspending the timer, and will
depend on this flag to know.

The modern x86 timer infrastructure uses the local APIC timers and never
shows up as a device interrupt at all, so it isn't affected and doesn't
need any of this.

Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: remove CONFIG_ACPI_SYSTEM
  fujitsu-laptop: Use RFKILL support bitmask from firmware
  x86_64: Fix S3 fail path
  x86_64: acpi/wakeup_64 cleanup
  battery: don't assume we are fully charged when not charging or discharging
  ACPI: EC: Add delay for slow MSI controller

Fix descriptions of device attributes to be consistent with the actual
implementations in include/linux/device.h

Signed-off-by: Mike Murphy <mamurph[at]cs.clemson.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the presented definition of struct device_attribute to match the
actual definition in include/linux/device.h

Signed-off-by: Mike Murphy <mamurph[at]cs.clemson.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

http://kisskb.ellerman.id.au/kisskb/buildresult/72115/:
| net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile'
| net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token
| net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type
| distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed

This is caused by

| # define mfp ((*(volatile struct MFP*)MFP_BAS))

in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in
net/mac80211/ieee80211_i.h.

Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.

If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.

This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove CONFIG_ACPI_SYSTEM.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

Some things under CONFIG_ACPI_SYSTEM (acpi_irq_handled, acpi_os_gpe_count(),
event_is_open, register_acpi_notifier(), etc.) are used unconditionally
by the CA, the OSPM, and drivers, so we depend on them always being
present.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Up until now, we polled the rfkill status for every incoming FUJ02E3 ACPI event.
It turns out that the firmware has a bitmask which indicates what rfkill-related
state it can report.
The rfkill_supported bitmask is now used to avoid polling for rfkill at all in
the notification handler if there is no support. Also, it is used in the platform
device callbacks. As before we register all callbacks and report "unknown" if the
firmware does not give us status updates for that particular bit.

This was fed through checkpatch.pl and tested on the S6420, S7020 and P8010
platforms.
Signed-off-by: NTony Vroon <tony@linx.net>
Tested-by: NStephen Gildea <stepheng+linux@gildea.com>
Acked-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: NLen Brown <len.brown@intel.com>

As acpi_enter_sleep_state can fail, take this into account in
do_suspend_lowlevel and don't return to the do_suspend_lowlevel's
caller. This would break (currently) fpu status and preempt count.

Technically, this means use `call' instead of `jmp' and `jmp' to
the `resume_point' after the `call' (i.e. if
acpi_enter_sleep_state returns=fails). `resume_point' will handle
the restore of fpu and preempt count gracefully.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

- remove %ds re-set, it's already set in wakeup_long64
- remove double labels and alignment (ENTRY already adds both)
- use meaningful resume point labelname
- skip alignment while jumping from wakeup_long64 to the resume point
- remove .size, .type and unused labels
[v2]
- added ENDPROCs
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

* hibernate:
  PM: Fix suspend_console and resume_console to use only one semaphore
  PM: Wait for console in resume
  PM: Fix pm_notifiers during user mode hibernation
  swsusp: clean up shrink_all_zones()
  swsusp: dont fiddle with swappiness
  PM: fix build for CONFIG_PM unset
  PM/hibernate: fix "swap breaks after hibernation failures"
  PM/resume: wait for device probing to finish
  Consolidate driver_probe_done() loops into one place

This fixes a race where a thread acquires the console while the
console is suspended, and the console is resumed before this
thread releases it. In this case, the secondary console
semaphore would be left locked, and the primary semaphore would
be released twice. This in turn would cause the console switch
on suspend or resume to hang forever.

Note that suspend_console does not actually lock the console
for clients that use acquire_console_sem, it only locks it for
clients that use try_acquire_console_sem. If we change
suspend_console to fully lock the console, then the kernel
may deadlock on suspend. One client of try_acquire_console_sem
is acquire_console_semaphore_for_printk, which uses it to
prevent printk from using the console while it is suspended.
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoids later waking up to a blinking cursor if the device woke up and
returned to sleep before the console switch happened.
Signed-off-by: NBrian Swetland <swetland@google.com>
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig
resume.  Make sure we also call notifiers with correct parameter telling
them what we are really doing.
Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move local variables to innermost possible scopes and use local
variables to cache calculations/reads done more than once.

No change in functionality (intended).
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sc.swappiness is not used in the swsusp memory shrinking path, do not
set it.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken
config dependncies.  Fix that.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Reported-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

http://bugzilla.kernel.org/show_bug.cgi?id=12239

The image writing code dropped a reference to the current swap device.
This doesn't show up if the hibernation succeeds - because it doesn't
affect the image which gets resumed.  But it means multiple _failed_
hibernations end up freeing the swap device while it is still use!

swsusp_write() finds the block device for the swap file using swap_type_of().
It then uses blkdev_get() / blkdev_put() to open and close the block device.

Unfortunately, blkdev_get() assumes ownership of the inode of the block_device
passed to it.  So blkdev_put() calls iput() on the inode.  This is by design
and other callers expect this behaviour.  The fix is for swap_type_of() to take
a reference on the inode using bdget().
Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

the resume code does not currently wait for device probing to finish.
Even without async function calls this is dicey and not correct,
but with async function calls during the boot sequence this is going
to get hit more...

This patch adds the synchronization using the newly introduced helper.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NGreg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

there's a few places that currently loop over driver_probe_done(), and
I'm about to add another one. This patch abstracts it into a helper
to reduce duplication.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NGreg KH <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On hardware like the T61 it can take a couple of seconds for the battery
to start charging after the power is connected, and we incorrectly tell
userspace that we are fully charged, and then go back to charging.

Only mark a battery as fully charged when the preset charge matches either
the last full charge, or the design charge.

http://bugzilla.kernel.org/show_bug.cgi?id=12632Signed-off-by: NRichard Hughes <hughsient@gmail.com>
Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=12011Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: remove incorrect __cpuinit for mce_cpu_features()
  MAINTAINERS: paravirt-ops maintainers update

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix multiuser mounts so server does not invalidate earlier security contexts
  [CIFS] improve posix semantics of file create
  [CIFS] Fix oops in cifs_strfromUCS_le mounting to servers which do not specify their OS
  cifs: posix fill in inode needed by posix open
  cifs: properly handle case where CIFSGetSrvInodeNumber fails
  cifs: refactor new_inode() calls and inode initialization
  [CIFS] Prevent OOPs when mounting with remote prefixpath.
  [CIFS] ipv6_addr_equal for address comparison

Impact: Bug fix on UP

Checkin 6ec68bff:
    x86, mce: reinitialize per cpu features on resume

introduced a call to mce_cpu_features() in the resume path, in order
for the MCE machinery to get properly reinitialized after a resume.
However, this function (and its successors) was flagged __cpuinit,
which becomes __init on UP configurations (on SMP suspend/resume
requires CPU hotplug and so this would not be seen.)

Remove the offending __cpuinit annotations for mce_cpu_features() and
its successor functions.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

When two different users mount the same Windows 2003 Server share using CIFS,
the first session mounted can be invalidated.  Some servers invalidate the first
smb session when a second similar user (e.g. two users who get mapped by server to "guest")
authenticates an smb session from the same client.

By making sure that we set the 2nd and subsequent vc numbers to nonzero values,
this ensures that we will not have this problem.

Fixes Samba bug 6004, problem description follows:
How to reproduce:

- configure an "open share" (full permissions to Guest user) on Windows 2003
Server (I couldn't reproduce the problem with Samba server or Windows older
than 2003)
- mount the share twice with different users who will be authenticated as guest.

 noacl,noperm,user=john,dir_mode=0700,domain=DOMAIN,rw
 noacl,noperm,user=jeff,dir_mode=0700,domain=DOMAIN,rw

Result:

- just the mount point mounted last is accessible:
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Samba server added support for a new posix open/create/mkdir operation
a year or so ago, and we added support to cifs for mkdir to use it,
but had not added the corresponding code to file create.

The following patch helps improve the performance of the cifs create
path (to Samba and servers which support the cifs posix protocol
extensions).  Using Connectathon basic test1, with 2000 files, the
performance improved about 15%, and also helped reduce network traffic
(17% fewer SMBs sent over the wire) due to saving a network round trip
for the SetPathInfo on every file create.

It should also help the semantics (and probably the performance) of
write (e.g. when posix byte range locks are on the file) on file
handles opened with posix create, and adds support for a few flags
which would have to be ignored otherwise.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Fixes kernel bug #10451 http://bugzilla.kernel.org/show_bug.cgi?id=10451

Certain NAS appliances do not set the operating system or network operating system
fields in the session setup response on the wire.  cifs was oopsing on the unexpected
zero length response fields (when trying to null terminate a zero length field).

This fixes the oops.
Acked-by: NJeff Layton <jlayton@redhat.com>
CC: stable <stable@kernel.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

function needed to prepare for posix open
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

...if it does then we pass a pointer to an unintialized variable for
the inode number to cifs_new_inode. Have it pass a NULL pointer instead.

Also tweak the function prototypes to reduce the amount of casting.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Move new inode creation into a separate routine and refactor the
callers to take advantage of it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'.
Checks if the prefixpath in an accesible while we are still in cifs_mount
and fails with reporting a error if we can't access the prefixpath

Should fix Samba bugs 6086 and 5861 and kernel bug 12192
Signed-off-by: NIgor Mammedov <niallain@gmail.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (26 commits)
  drm/radeon: update sarea copies of last_ variables on resume.
  drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap.
  drm/i915: take struct mutex around fb unref
  drm: Use spread spectrum when the bios tells us it's ok.
  drm: Collapse identical i8xx_clock() and i9xx_clock().
  drm: Bring PLL limits in sync with DDX values.
  drm: Add locking around cursor gem operations.
  drm: Propagate failure from setting crtc base.
  drm: Check for a NULL encoder when reverting on error path
  drm/i915: Cleanup the hws on ringbuffer constrution failure.
  drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init.
  drm: Release user fbs in drm_release
  drm/i915: Unpin the fb on error during construction.
  drm/i915: Unpin the hws if we fail to kmap.
  drm/i915: Unpin the ringbuffer if we fail to ioremap it.
  drm/i915: unpin for an invalid memory domain.
  drm/i915: Release and unlock on mmap_gtt error path.
  drm/i915: Set framebuffer alignment based upon the fence constraints.
  drm: Do not leak a new reference for flink() on an existing name
  drm/i915: Fix potential AB-BA deadlock in i915_gem_execbuffer()
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: use the right protections for split-up pagetables
  x86, vmi: TSC going backwards check in vmi clocksource

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: Update version number to 8.03.00-k3.
  [SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions.
  [SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.
  [SCSI] qla2xxx: Properly acknowledge IDC notification messages.
  [SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode.
  [SCSI] lpfc: introduce missing kfree
  [SCSI] libiscsi: Fix scsi command timeout oops in iscsi_eh_timed_out
  [SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card.
  [SCSI] ibmvfc: Increase cancel timeout
  [SCSI] ibmvfc: Fix rport relogin
  [SCSI] ibmvfc: Fix command timeout errors
  [SCSI] sg: fix device number in blktrace data
  [SCSI] scsi_scan: add missing interim SDEV_DEL state if slave_alloc fails
  [SCSI] ibmvscsi: Correct DMA mapping leak

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check file pointer in btrfs_sync_file