- 30 1月, 2009 13 次提交
-
-
由 Christian Lamparter 提交于
This patch adds support to upload pre-calculated calibration data to the firmware. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
mac80211 reserves 24 bytes in skb->cb for the driver. So far, we only used them to keep track of used and free device memory. But p54spi will need a slice of it, as well as the stuck frame detection. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Old firmwares had no problems processing frames which filled eighth of the memory window. However we have to be a bit more careful with fat frames when we talk to new firmwares. Apart from that, I confess the old logic was a bit weird and not very sophisticated. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch addresses all recent comments from Johannes Berg: 1st: (reference http://marc.info/?l=linux-wireless&m=123124685019631 ) >First off: all those should return NETDEV_TX_OK/BUSY. >iwl-agn: returns 0 (== NETDEV_TX_OK, but still should be changed) >[...] >p54: same (some paths) 2nd: > due to your PS patch ("p54: power save management"), please run sparse: > make C=2 CF=-D__CHECK_ENDIAN__ M=... > +drivers/net/wireless/p54/p54common.c:1753:8: warning: incorrect type in assignment (different base types) > +drivers/net/wireless/p54/p54common.c:1769:29: warning: incorrect type in assignment (different base types) The cpu_to_le16 ended up in the wrong line... Sorry! Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch implements dynamic power save feature for p54. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
According to STMicroelectronics' LMAC documentation, the P54_FILTER_TYPE_TRANSPARENT flag "configures the receive frame filter to pass all frames without regard to type and address matching." Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Respect all documented bits in the eeprom about the device diversity features. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k] Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00] Acked-by: Christian Lamparter <chunkeey@web.de> [p54] Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945] Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945] Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch adds a sub-routine that parses the default country eeprom entry and forwards the obtained Alpha2 identifier to the regulatory sub-system. Note: I dropped the p54 specific regdomain<->alpha2 conversion code for now. But it will be added as soon as there's the common library function is ready. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch will prevent anyone to upload a firmware which was not designed for his device. There's still a catch: There is no easy way to detect if a firmware is for PCI or for USB (1st Gen), because they all share the same LM86 identifier. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Sometimes on unload or reboot the 3887 USB devices become stuck. <usual log entry> kernel: usbcore: registered new interface driver p54usb kernel: usb 2-10: (p54usb) reset failed! (-110) kernel: p54usb: probe of 2-10:1.0 failed with error -110 [...] and a physical unplug and replug was necessary. However we should be able to do this in software as well, without any user interaction. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch enables frame injection in monitor mode for all p54 devices. As a result, any user can finally use the aircrack-ng suite out of the box. e.g: aireplay-ng --test wlan0 Trying broadcast probe requests... Injection is working! Found 1 AP Trying directed probe requests... XX:XX:XX:XX:XX:XX - channel: i - 'SSID' Ping (min/avg/max): 1.536ms/3.193ms/4.377ms Power: 193.00 30/30: 100% Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch introduce new shiny named labels for our 8 (4 - on old firmware) queues. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 1月, 2009 1 次提交
-
-
由 Christian Lamparter 提交于
Artur Skawina confirmed that the first generation devices needs the same URB_ZERO_PACKET flag, in oder to finish the pending transfer properly. The second generation has been successfully fixed by "p54usb: fix random traffic stalls (LM87)" (43af18f06d5) Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 1月, 2009 3 次提交
-
-
由 Christian Lamparter 提交于
In theory, the firmware acks the received a data frame, before signaling the driver to free it again. However Artur Skawina <art.08.09@gmail.com> has shown that it can happen in reverse order as well. This is very bad and could lead to memory corruptions, oopses and panics. Thanks to Artur Skawina <art.08.09@gmail.com> for reporting and debugging this issue. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Tested-by: NArtur Skawina <art.08.09@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
If we let the firmware do the data encryption, we have to remove the ICV and (M)MIC at the end of the frame before we can give it back to mac80211. Or, these data frames have a few trailing bytes on cooked monitor interfaces. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Chr 提交于
This patch fixes a obvious memory leak in the eeprom parser. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 1月, 2009 3 次提交
-
-
由 Christian Lamparter 提交于
p54 doesn't support AES-128-CMAC offload. This patch will fix the noisy mac80211 warnings, when 802.11w is enabled: mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22) mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22) Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Artur Skawina 提交于
Fix for: BUG: scheduling while atomic: named/2004/0x10000200 Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45 Call Trace: [<c04d4ef7>] schedule+0x2a7/0x320 [<c03aed74>] __alloc_skb+0x34/0x110 [<c011f5b3>] __cond_resched+0x13/0x30 [<c04d501d>] _cond_resched+0x2d/0x40 [<c016d8c5>] kmem_cache_alloc+0x95/0xc0 [<c016b8d4>] check_object+0xc4/0x230 [<c03aed74>] __alloc_skb+0x34/0x110 [<c02ede91>] p54_alloc_skb+0x71/0xf0 [<c02ee36f>] p54_set_tim+0x3f/0xa0 [<c04ae064>] sta_info_set_tim_bit+0x64/0x80 [<c04c1017>] invoke_tx_handlers+0xd57/0xd80 [<c016c397>] free_debug_processing+0x197/0x210 [<c03ae215>] pskb_expand_head+0xf5/0x170 [<c04bfd94>] __ieee80211_tx_prepare+0x164/0x2f0 [<c04c1a8d>] ieee80211_skb_resize+0x6d/0xe0 [<c04c250f>] ieee80211_master_start_xmit+0x23f/0x550 [<c016d188>] __slab_alloc+0x2b8/0x4f0 [<c013a711>] getnstimeofday+0x51/0x120 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240 [<c03c6a4b>] __qdisc_run+0x1ab/0x200 [<c0136aa1>] __run_hrtimer+0x31/0xf0 [<c03b6247>] dev_queue_xmit+0x247/0x500 [<c04c1e56>] ieee80211_subif_start_xmit+0x356/0x7d0 [<c0466ff7>] packet_rcv_spkt+0x37/0x150 [<c0466ff7>] packet_rcv_spkt+0x37/0x150 [<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240 [<c03c6a4b>] __qdisc_run+0x1ab/0x200 [<c03b6247>] dev_queue_xmit+0x247/0x500 [<c03bc1e2>] neigh_resolve_output+0xe2/0x200 [<c0410080>] ip_finish_output+0x0/0x290 [<c0410267>] ip_finish_output+0x1e7/0x290 [<c040f355>] ip_local_out+0x15/0x20 [<c040f5d2>] ip_push_pending_frames+0x272/0x380 [<c042bbc6>] udp_push_pending_frames+0x146/0x3a0 [<c042d52a>] udp_sendmsg+0x2fa/0x6b0 [<c0433bc7>] inet_sendmsg+0x37/0x70 [<c03a7b7e>] sock_sendmsg+0xbe/0x100 [<c0133cd0>] autoremove_wake_function+0x0/0x50 [<c011c043>] __wake_up_common+0x43/0x70 [<c024a892>] copy_from_user+0x32/0x130 [<c024a892>] copy_from_user+0x32/0x130 [<c03b001e>] verify_iovec+0x2e/0xb0 [<c03a7d3f>] sys_sendmsg+0x17f/0x290 [<c017730a>] pipe_write+0x29a/0x570 [<c013a172>] update_wall_time+0x492/0x8e0 [<c013a711>] getnstimeofday+0x51/0x120 [<c011b05d>] sched_slice+0x3d/0x80 [<c013a711>] getnstimeofday+0x51/0x120 [<c0136657>] hrtimer_forward+0x147/0x1a0 [<c01101b0>] lapic_next_event+0x10/0x20 [<c013ccb3>] clockevents_program_event+0xa3/0x170 [<c03a9054>] sys_socketcall+0xa4/0x290 [<c0110920>] smp_apic_timer_interrupt+0x40/0x70 [<c0103165>] sysenter_do_call+0x12/0x25 Signed-off-by: NArtur Skawina <art.08.09@gmail.com> Acked-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted. BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: p54_assign_address+0x108/0x15d [p54common] Oops: 0002 [#1] SMP Pid: 12988, comm: phy1 Tainted: P W 2.6.28-rc6-wl #3 RIP: 0010: p54_assign_address+0x108/0x15d [p54common] [...] Call Trace: p54_alloc_skb+0xa3/0xc0 [p54common] p54_scan+0x37/0x204 [p54common] [...] Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 1月, 2009 6 次提交
-
-
由 John W. Linville 提交于
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch hopefully fixes a mac80211<->p54 interaction problem, which was described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 ) I guess the warning was triggered by pending frames in the receive queue, while we're doing a band change 5GHz. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
All LM87 firmwares need a explicit termination "packet", in oder to finish the pending transfer properly. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch fixes two small flaws: - restore the original TKIP IV if we altered it. - reserve & initialize ICV with zeros. This is actually only necessary for some obsolete p54usb firmwares. But we don't know yet, if all devices are compatible with the new revisions. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michiel 提交于
Add the USB ID for Thomson Speedtouch 121g to p54usb. Signed-off-by: NMichiel <michiel@ettema.net> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
On x86_64 architecture with 4K page size and SLUB debugging enabled, stress testing on p54usb has resulted in skb allocation failures of O(1) and extreme page fragmentation. Reducing rx_mtu fixes this problem by reducing the size of all receive skb allocations to be of O(0). This change does not impact performance in any way. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 12月, 2008 5 次提交
-
-
由 Christian Lamparter 提交于
This patch fixes a serious regression (introduced by: "p54: fix memory management") that affected isl3886+net2280 usb devices operation. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Tested-by: NArtur Skawina <art.08.09@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch simplifies the tx code a bit and will be necessary for the upcoming stlc45xx<->p54 port. In detail: we no longer have to tell all back-end drivers directly, if we want to free a frame right after it was send to the firmware, or if we do it in the library callback later. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch replaces the static rssi auto calibration data with more precise values out of the device's eeprom. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch moves a good chunk of code from the former statistic update timer routine into a workqueue, which is kindly provided by mac80211. Also as a nice side-effect we can lay the foundation for other essential housekeeping features we want to do in the future. e.g: - drain the (clogged) tx_queue. - initiate bursts. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 12月, 2008 4 次提交
-
-
由 Christian Lamparter 提交于
This patch fixes an oops when the devices suddenly starts to receive martian data frames. bug reference: http://marc.info/?l=linux-wireless&m=122872280317635&w=2Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
The patch fixes an old FIXME in p54pci.c by moving the "queue full" check into the common library, where we can deal with it properly. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch replaces the newly introduced sta_notify_ps function, which can be used to notify the driver about every power state transition for all associated stations, by integrating its functionality back into the original sta_notify callback. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Alan Stern found several flaws in p54usb's implementation and annotated: "usb_kill_urb() and similar routines do not expect an URB's completion routine to deallocate it. This is almost obvious -- if the URB is deallocated before the completion routine returns then there's no way for usb_kill_urb to detect when the URB actually is complete." This patch addresses all known limitations in the old implementation and fixes khub's "use-after-freed" hang, when SLUB debug's poisoning option is enabled. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Cc: stable@kernel.org Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2008 5 次提交
-
-
由 Johannes Berg 提交于
This fixes the checksum calculation for lm87 firmwares on big endian platforms, the device treats the data as an array of 32-bit little endian values so the driver needs to do that as well. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch replaces the static "p54:" strings in front of most printk's with their corresponding per-device names. It was always a bit of a hassle to check which device was generating all the messages. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Thanks to the introduction of "changed" flags, we no longer have to do the bookkeeping of p54's firmware state for everything. Thus we can cut down redundancy code. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Those firmwares are probably capable of reprogramming the device's eeprom. We better support them officially, before all the accidents happen. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch allows p54 to utilize its WEP, TKIP and CCMP accelerator. Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-