- 05 6月, 2016 6 次提交
-
-
由 Andrew Lunn 提交于
The existing DSA binding has a number of limitations and problems. The main problem is that it cannot represent a switch as a linux device, hanging off some bus. It is limited to one CPU port. The DSA platform device is artificial, and does not really represent hardware. Implement a new binding which can be embedded into any type of node on a bus to represent one switch device, and its links to other switches. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Replace the two switch statements with an array lookup, and store the result in the dsa tree structure. The drivers no longer need to know the selected tag protocol, so remove it from the dsa switch structure. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
The new binding will not have a chip data structure, it will place the routing directly into the switch structure. To enable backwards compatibility, copy the routing from the chip data into the switch structure. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
With a maximum of four switches, the size of the routing table is the same as the pointer to it. Removing it makes the code simpler. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Move the port device node structure into the port structure, from the chip data. This information is needed in the next step of implementing the new binding. The chip data structure is used while parsing the whole old binding, before the individual switch structures exist. With the new bindings, this is reversed, the switches exist first, and the interconnections between the switches is derived from the individual switch bindings. Thus this chip data structure becomes unneeded. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> eviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
There are going to be more per-port members added to the switch structure. So add a port structure and move the netdev into it. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2016 7 次提交
-
-
由 Yuval Mintz 提交于
Commit a91eb52a ("qed: Revisit chain implementation") contains an incorrect implementation for BE platforms, as device's regpairs containing addresses are LE and they're not converted correctly when read back. In addition, it raises a compilation warning for 32-bit platforms where dma_addr_t is a 32-bit variable. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds the qed portion of the RoCE & iSCSI firmware HSI, as well as adding several new common HSI files which would be required by both qed and qed* protocols. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
SCTP has this pecualiarity that its packets cannot be just segmented to (P)MTU. Its chunks must be contained in IP segments, padding respected. So we can't just generate a big skb, set gso_size to the fragmentation point and deliver it to IP layer. This patch takes a different approach. SCTP will now build a skb as it would be if it was received using GRO. That is, there will be a cover skb with protocol headers and children ones containing the actual segments, already segmented to a way that respects SCTP RFCs. With that, we can tell skb_segment() to just split based on frag_list, trusting its sizes are already in accordance. This way SCTP can benefit from GSO and instead of passing several packets through the stack, it can pass a single large packet. v2: - Added support for receiving GSO frames, as requested by Dave Miller. - Clear skb->cb if packet is GSO (otherwise it's not used by SCTP) - Added heuristics similar to what we have in TCP for not generating single GSO packets that fills cwnd. v3: - consider sctphdr size in skb_gso_transport_seglen() - rebased due to 5c7cdf33 ("gso: Remove arbitrary checks for unsupported GSO") Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
skb_gso_network_seglen is not enough for checking fragment sizes if skb is using GSO_BY_FRAGS as we have to check frag per frag. This patch introduces skb_gso_validate_mtu, based on the former, which will wrap the use case inside it as all calls to skb_gso_network_seglen were to validate if it fits on a given TMU, and improve the check. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
This patch allows segmenting a skb based on its frags sizes instead of based on a fixed value. Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
In commit e6afc8ac ("udp: remove headers from UDP packets before queueing"), udp_csum_pull_header() helper was added but missed fact that CHECKSUM_UNNECESSARY packets were now converted to CHECKSUM_NONE and skb->csum_valid was set to 1 for them. Since csum_partial() is quite expensive, even for 8-byte area, it is worth adding a test. We also can use skb->data instead of udp_hdr() as we are pulling UDP headers, as it is sightly faster. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2016 1 次提交
-
-
由 Xin Long 提交于
Now we cannot distinguish that one sk is a udp or sctp style when we use ss to dump sctp_info. it's necessary to dump it as well. For sctp_diag, ss support is not officially available, thus there are no official users of this yet, so we can add this field in the middle of sctp_info without breaking user API. v1->v2: - move 'sctpi_s_type' field to the end of struct sctp_info, so that it won't cause incompatibility with applications already built. - add __reserved3 in sctp_info to make sure sctp_info is 8-byte alignment. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 5月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: 55c2bc14 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2016 6 次提交
-
-
由 George Spelvin 提交于
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
由 George Spelvin 提交于
The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
由 George Spelvin 提交于
That's all that's ever asked for, and it makes the return type of hash_long() consistent. It also allows (upcoming patch) an optimized implementation of hash_64 on 32-bit machines. I tried adding a BUILD_BUG_ON to ensure the number of bits requested was never more than 32 (most callers use a compile-time constant), but adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler unless tools/perf/MANIFEST is updated, and understanding that code base well enough to update it is too much trouble. I did the rest of an allyesconfig build with such a check, and nothing tripped. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
由 George Spelvin 提交于
Finally, the first use of previous two patches: eliminate the separate ad-hoc string hash functions in the sunrpc code. Now hash_str() is a wrapper around hash_string(), and hash_mem() is likewise a wrapper around full_name_hash(). Note that sunrpc code *does* call hash_mem() with a zero length, which is why the previous patch needed to handle that in full_name_hash(). (Thanks, Bruce, for finding that!) This also eliminates the only caller of hash_long which asks for more than 32 bits of output. The comment about the quality of hashlen_string() and full_name_hash() is jumping the gun by a few patches; they aren't very impressive now, but will be improved greatly later in the series. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: linux-nfs@vger.kernel.org
-
由 George Spelvin 提交于
We'd like to make more use of the highly-optimized dcache hash functions throughout the kernel, rather than have every subsystem create its own, and a function that hashes basic null-terminated strings is required for that. (The name is to emphasize that it returns both hash and length.) It's actually useful in the dcache itself, specifically d_alloc_name(). Other uses in the next patch. full_name_hash() is also tweaked to make it more generally useful: 1) Take a "char *" rather than "unsigned char *" argument, to be consistent with hash_name(). 2) Handle zero-length inputs. If we want more callers, we don't want to make them worry about corner cases. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
由 George Spelvin 提交于
... so they can be used without the rest of <linux/dcache.h> The hashlen_* macros will make sense next patch. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net>
-
- 28 5月, 2016 5 次提交
-
-
由 Al Viro 提交于
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e640. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Tested-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Now that the allmodconfig x86-64 build is clean wrt IS_ERR_VALUE() uses on integers, add a cast to a pointer and back to the argument, so that any new mis-uses of IS_ERR_VALUE() will cause warnings like warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] so that we don't re-introduce any bogus uses. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The do_brk() and vm_brk() return value was "unsigned long" and returned the starting address on success, and an error value on failure. The reasons are entirely historical, and go back to it basically behaving like the mmap() interface does. However, nobody actually wanted that interface, and it causes totally pointless IS_ERR_VALUE() confusion. What every single caller actually wants is just the simpler integer return of zero for success and negative error number on failure. So just convert to that much clearer and more common calling convention, and get rid of all the IS_ERR_VALUE() uses wrt vm_brk(). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The register_page_bootmem_info_node() function needs to be marked __init in order to avoid a new warning introduced by commit f65e91df ("mm: use early_pfn_to_nid in register_page_bootmem_info_node"). Otherwise you'll get a warning about how a non-init function calls early_pfn_to_nid (which is __meminit) Cc: Yang Shi <yang.shi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 5月, 2016 7 次提交
-
-
由 Michal Hocko 提交于
mmput_async is currently used only from the oom_reaper which is defined only for CONFIG_MMU. We can save work_struct in mm_struct for !CONFIG_MMU. [akpm@linux-foundation.org: fix typo, per Minchan] Link: http://lkml.kernel.org/r/20160520061658.GB19172@dhcp22.suse.czReported-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
It's unused since commit 7ed2f9e6 ("mm, kasan: SLAB support") Link: http://lkml.kernel.org/r/1464020961-2242-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
lockless_dereference() is supposed to take pointer not integer. Link: http://lkml.kernel.org/r/20160521201448.GA7429@p183.telecom.bySigned-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Moritz Fischer 提交于
This commit fixes a simple typo s/mvmem/nvmem in the example. Signed-off-by: NMoritz Fischer <moritz.fischer@ettus.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Christoph Lameter 提交于
In practice, each RDMA device has a unique set of counters that the hardware implements. Having a central set of counters that they must all adhere to is limiting and causes many useful counters to not be available. Therefore we create a dynamic counter registration infrastructure. The driver must implement a stats structure allocation routine, in which the driver must place the directory name it wants, a list of names for all of the counters, an array of u64 counters themselves, plus a few generic configuration options. We then implement a core routine to create a sysfs file for each of the named stats elements, and a core routine to retrieve the stats when any of the sysfs attribute files are read. To avoid excessive beating on the stats generation routine in the drivers, the core code also caches the stats for a short period of time so that someone attempting to read all of the stats in a given device's directory will not result in a stats generation call per file read. Future work will attempt to standardize just the shared stats elements, and possibly add a method to get the stats via netlink in addition to sysfs. Signed-off-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NMark Bloch <markb@mellanox.com> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com> [ Add caching, make structure names more informative, add i40iw support, other significant rewrites from the original patch ]
-
由 Mike Marciniszyn 提交于
rdmavt allows the driver to specify the size of the ack queue, but only uses it for the modify QP limit testing for setting the atomic limit value. The driver dependent size is now used to size the s_ack_queue ring dynamicially. Since the driver knows its size, the driver will use its define for any ring size dependent code. Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mike Marciniszyn 提交于
This matches the ib_qp_attr size and avoids a extremely large value when the lower level driver registers. As part of the patch, the u8 ordinals are moved to the end of the struct to reduce pahole noted excesses. Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 26 5月, 2016 5 次提交
-
-
由 Dennis Dalessandro 提交于
Remove the write() handler for user space commands now that ioctl handling is available. User apps will need to change to use ioctl from this point forward. Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dennis Dalessandro 提交于
IOCTL is more suited to what user space commands need to do than the write() interface. Add IOCTL definitions for all existing write commands and the handling for those. The write() interface will be removed in a follow on patch. Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dennis Dalessandro 提交于
The HFI1_CMD_SDMA_STATUS_UPD command was never implemented it has no reason to live in the driver. Remove it. Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dennis Dalessandro 提交于
Remove EPROM handling from the cdev which is used for user application data traffic. Reviewed-by: NDean Luick <dean.luick@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dennis Dalessandro 提交于
hfi1 current exports a cdev that can be used to target all of the hfi's in the system. However there is a problem with this approach in that the devices could be on different subnets. This is a problem that user space can figure out and explicitly tell the driver on which device to create a context. Remove the multi-purpose cdev leaving a dedicated cdev for each port. Also remove the striping capability that is dependent upon the user choosing the multi-purpose cdev. It is now up to user space to determine how to stripe contexts. Reviewed-by: NDean Luick <dean.luick@intel.com> Reviewed-by: NMitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-