Replace with the standard function calls to use caches for reading
the widget caps and pin caps.

hda_proc.c is still using the direct verbs to get raw values as
much as possible.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added snd_hda_query_pin_caps() to read and cache pin-cap values
to avoid too frequently issuing the same verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch does two things:
 Output Intel HDA Function Id in /proc/asound/cardX/codec#X
 Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros

Before:
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x100100

After:
 Function Id: 0x1
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x0100100

As report on the Kernel Bugzilla #12888
Signed-off-by: NPascal de Bruijn <pascal@unilogicnetworks.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If ratesp or formatsp values are zero, wrong values are passed to ALSA's
the PCM midlevel code. The bug is showed more later than expected.

Also, clean a bit the code.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the power state of each widget before starting the initialization
work so that all verbs are executed properly.

Also, keep power-up during hwdep reconfiguration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix snd_hda_add_vmaster() to check the non-zero indices of slave controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's false positive, but annoying.
  sound/pci/hda/hda_codec.c: In function ‘get_empty_pcm_device’:
  sound/pci/hda/hda_codec.c:2772: warning: ‘dev’ may be used uninitialized in this function
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't return a fatal error to the driver but continue to probe when
any error occurs at creating PCM streams for each codec.
It's often non-fatal and keeping it would help debugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Revert the codec probe instead of returning the error to the driver
when any error occurs at creating the control elements.
The control element conflict can be non-fatal in many cases,
especially if it comes from the digital-only codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Initiailize forgotten fields in snd_hda_codec_reset().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the pseudo device-locking using card->shutdown flag to avoid
the crash via clear/reconfig during operations.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make user_pin overriding even the driver pincfg, e.g. the static / fixed
pin config table in patch_sigmatel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rename from override_pin and cur_pin with user_pin and driver_pin,
respectively, to be a bit more intuitive.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace with snd_hda_codec_get_pincfg() in the places where available.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the generic pincfg cache and save/restore functions.
Also introduced the pin-overriding via hwdep sysfs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the helper function snd_hda_multi_out_dig_cleanup() to clean up
the digital outputs with multi setup.  This call is needed in cases
the codec supports multiple digital outputs as slaves.  Otherwise the
slave widgets aren't properly cleaned up.

For a single digital output (e.g. in patch_conexant.c), this call isn't
needed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detect multiple digital-out pins in snd_hda_parse_pin_defconfig().
The dig_out_pin and dig_out_type fields become arrays.

The codec parser still doesn't use this multiple pins detection, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a wrong pin check (a typo) for debug print of digital input pin.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some fixes regarding snd-hda-intel workqueue:
- Use create_singlethread_workqueue() instead of create_workqueue()
  as per-CPU work isn't required.
- Allocate workq name string properly
- Renamed the workq name to "hd-audio*" to be more obvious.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add dig_out_type and dig_in_type fields to autocfg struct.
A proper HDA_PCM_TYPE_* value is assigned to these fields according
to the pin-jack location type value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't break the loop in snd_hda_codec_build_pcms() even if the item
has no substreams.

It's possible that it's an empty item and the next item containing
the valid substreams (e.g. realtek codecs may create the analog
and alt-analog but no digitl streams).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Accept non-SPDIF digital I/O pins as the digital pins.
These are usually corresponding to HDMI I/O.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the debug prints for digital I/O pin detections in
snd_hda_parse_pin_def_config() function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the volume offset to base for the standard volume controls
to handle elements with too big volume scales like -96dB..0dB.
For such elements, you can set the base volume to reduce the range.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replaced the old schedule_work() with queue_delayed_work() where
overlooked in the previous patches.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
  called during probe callback (as probe callback itself could be
  invoked from eventd)

This patch adds an own workq for each driver instance to solve these
problems.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex.

    ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2

    =======================================================
    [ INFO: possible circular locking dependency detected ]
    2.6.28-next-20090102 #33
    -------------------------------------------------------
    mplayer/3151 is trying to acquire lock:
     (&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm]

    but task is already holding lock:
     (&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80

    which lock already depends on the new lock.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing.  When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses.  It's useful to see the initial codec state for debugging.

The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The re-initializations of codec amp and verb caches are missing
at reconfig, which may cause Oops occasionally.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added Intel codec vendor id string (0x8086).
Also fixed Intel-HDMI codec name strings, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added Nvidia (0x10de) to the vendor id list.
Cleaned up the codec name strings accordingly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Gateway notebooks have their ID inside codec vendor ID, not at PCI ID. Due to
that, model auto-detection were not possible with the standard seek method.

This is what is found at lspci -vnn:

00:14.2 Audio device [0403]: ATI Technologies Inc SB450 HDA Audio [1002:437b] (rev 01)
        Subsystem: ATI Technologies Inc SB450 HDA Audio [1002:437b]

Yet, autodetection is possible, since the codec properly reflects the vendor at
the Subsystem ID:

$ cat /proc/asound/card0/codec#0 |head -4

Codec: SigmaTel STAC9250
Address: 0
Vendor Id: 0x83847634
Subsystem Id: 0x107b0367

This patch adds a new autodetection function that seeks for codec subsystem ID.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The global functions in hda_codec.c and other core parts are only
for HD-audio codec and controller drivers.  When the HD-audio driver
is built in kernel, all stuff have to be statically linked, thus
we don't need any exports.

This patch introduces a conditional macro to do export only
when needed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Checking MODULE is more generic.
Also a cosmetic comment change.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clear the remaining pointer at snd_hda_codec_reset() to avoid Oops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split the monolithc HD-audio driver into several pieces:
 - snd-hda-intel   HD-audio PCI controller driver; loaded via udev
 - snd-hda-codec   HD-audio codec bus driver
 - snd-hda-codec-* Specific HD-audio codec drivers

When built as modules, snd-hda-codec (that is invoked by snd-hda-intel)
looks up the codec vendor ID and loads the corresponding codec module
automatically via request_module().

When built in a kernel, each codec drivers are statically hooked up
before probing the PCI.

This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module
information for each driver, and driver-linking codes between
codec-bus and codec drivers.

TODO:
  - Avoid EXPORT_SYMBOL*() when built-in kernel
  - Restore __devinit appropriately depending on the condition
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reconfiguration of PCM affected all PCM streams on the bus, but
this this should be done rather only for the target codec.

This patch does the following:
- introduce bitmap indicating the PCM device usages on a hda_bus
- refactor the PCM build functions
- fix __devinit prefix in some fucntions
- add a proper ifdef around HDA-reconfig-specific functions
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move power_save option into hda_intel.c, and make a field in hda_bus,
instead of keeping module parameters in separate files.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Minor clean ups: move snd_hda_codecs_inuse() into hda_intel.c and
make static.  Also, make snd_hda_query_supported_pcm() static
as it's used only in hda_codec.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>