It appears that controls are ordered by ID number when enumerating.
That could lead illogical UI as controls are usually enumerated and
drawn by the application at runtime.

Change order of controls by reorganizing assigned IDs now as we can.
It is not reasonable possible after the API is released. Also, leave
some spare space between IDs too for possible future extensions.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Modern silicon RF tuners has one or more adjustable filters on
signal path, in order to filter noise from desired radio channel.

Add channel bandwidth control to tell the driver which is radio
channel width we want receive. Filters could be then adjusted by
the driver or hardware, using RF frequency and channel bandwidth
as a base of filter calculations.

On automatic mode (normal mode), bandwidth is calculated from sampling
rate or tuning info got from userspace. That new control gives
possibility to set manual mode and let user have more control for
filters.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Use Hertz as a unit for radio channel bandwidth.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add documentation for RF tuner bandwidth controls. These controls are
used to set filters on tuner signal path.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix spelling typo under Documentation/DocBook/media.
It is because these files are NOT generated by "make htmldocs",
I have to fix the files.

[m.chehab@samsung.com: fix a merge conflict]
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832]

The USB dongle uses RTL2832U demodulator and FC0012 tuner.
Signed-off-by: NJan Vcelak <jv@fcelda.cz>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The "Renesas Corporation" listed in the copyright notice doesn't exist.
Replace it with "Renesas Electronics Corporation" and update the
copyright years.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Check if index is within bounds _before_ accessing the value.
Signed-off-by: NOle Ernst <olebowle@gmx.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

It was possible that tuner_frequency variable, used for carrier offset
compensation, was uninitialized. That happens when tuner
.get_frequency() callback is not defined.

Currently that case is not possible as only used tuner has this callback.

Coverity CID 1166057: Uninitialized scalar variable (UNINIT)
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Coverity CID 1166051: Logically dead code (DEADCODE)

TS clock calculation could be more accurate, but as it is not,
remove those unused clock speeds.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Coverity CID 1166050: Dead default in switch (DEADCODE)
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

While playing with make coccicheck I noticed this message:
drivers/media/rc/rc-main.c:1245:3-9: preceding lock on line 1238

It was introduced by commit 587d1b06 ([media] rc-core: reuse device
numbers) which returns -ENOMEM after a mutex_lock without first
unlocking it when there are no more device numbers left. The added code
doesn't depend on the device lock, so move it before the lock is taken.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Static checkers complain about the inconsistent NULL check here.

There is an unchecked dereference of "input->fe" in the call to
tuner_attach_tda18271() and there is a second unchecked dereference a
couple lines later when we do:
	input->fe2->tuner_priv = input->fe->tuner_priv;

But actually "intput->fe" can't be NULL because if demod_attach_drxk()
fails to allocate it, then we would have return an error code.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

ARRAY_SIZE(buf) (8 elements) was intended instead of sizeof(buf) (16
bytes).  But this is just a sanity check and the callers always pass
valid values so this doesn't cause a problem.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add an img-ir module for decoding the Sanyo infrared protocol.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add an img-ir module for decoding the Sharp infrared protocol.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add an img-ir module for decoding the Sony infrared protocol.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add an img-ir module for decoding the JVC infrared protocol.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add an img-ir module for decoding the NEC and extended NEC infrared
protocols.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add ImgTec IR decoder driver to the build system.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add remote control input driver for the ImgTec Infrared block hardware
decoder, which is set up with timings for a specific protocol and
supports mask/value filtering and wake events.

The hardware decoder timing values, raw data to scan code conversion
function and scan code filter to raw data filter conversion function
will be provided in separate files for each protocol which this part of
the driver can use. The new generic scan code filter interface is made
use of to reduce interrupts and control wake events.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add raw IR remote control input driver for the ImgTec Infrared decoder
block's raw edge interrupts. Generic software protocol decoders are used
to allow multiple protocols to be supported at a time, including those
not supported by the hardware decoder.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add base driver for the ImgTec Infrared decoder block. The driver is
split into separate components for raw (software) decode and hardware
decoder which are in following commits.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add device tree binding for ImgTec Consumer Infrared block, specifically
major revision 1 of the hardware.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When either of the normal or wakeup filter protocols are changed,
refresh the corresponding scancode filter, i.e. try and set the same
scancode filter with the new protocol. If that fails clear the filter
instead.

If no protocol was selected the filter is just cleared, and if no
s_filter callback exists the filter is left unmodified.

Similarly clear the filter mask when the filter is set if no protocol is
currently selected.

This simplifies driver code which no longer has to explicitly worry
about modifying the filter on a protocol change. This also allows the
change_wakeup_protocol callback to be omitted entirely if there is only
a single available wakeup protocol at a time, since selecting no
protocol will automatically clear the wakeup filter, disabling wakeup.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add a wakeup_protocols sysfs file which controls the new
rc_dev::enabled_protocols[RC_FILTER_WAKEUP], which is the mask of
protocols that are used for the wakeup filter.

A new RC driver callback change_wakeup_protocol() is called to change
the wakeup protocol mask.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Only a single allowed and enabled protocol mask currently exists in
struct rc_dev, however to support a separate wakeup filter protocol two
of each are needed, ideally as an array.

Therefore make both rc_dev::allowed_protos and rc_dev::enabled_protocols
arrays, update all users to reference the first element
(RC_FILTER_NORMAL), and add a couple more helper functions for drivers
to use for setting the allowed and enabled wakeup protocols.

We also rename allowed_protos to allowed_protocols while we're at it,
which is more consistent with enabled_protocols.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add generic scancode filtering of RC input events, and fall back to
permitting any RC_FILTER_NORMAL scancode filter to be set if no s_filter
callback exists. This allows raw IR decoder events to be filtered, and
potentially allows hardware decoders to set looser filters and rely on
generic code to filter out the corner cases.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On certain motherboards (mainly Intel NUC series) bios keeps the
Nuvoton CIR device disabled at boot.

This patch adds a call to kernel PNP layer to activate the device if it
is not already activated. This will improve the chances of the PNP probe
actually succeeding on Intel NUC platforms.
Signed-off-by: NAntti Seppälä <a.seppala@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

DViCO FusionHDTV7 device that use au0828 can fail to communicate with
xc5000 using i2c interface because of high i2c clock speed - i2c clock
stretching bug. It causes to fail xc5000 firmware loading normally at
the current driver.

Already this problem fixed as changing to low i2c clock speed at
HVR-950q device, also DViCO FusionHDTV7 device can solve it as using low
i2c clock speed - 20KHz.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Propagate errors returned by drivers from the s_filter callback back to
userland when updating scancode filters. This allows userland to see
when the filter couldn't be updated, usually because it's not a valid
filter for the hardware.

Previously the filter was being updated conditionally on success of
s_filter, but the write always reported success back to userland.
Reported-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add a device id to support for PX-S1UD (PLEX ISDB-T usb dongle) which
has sms2270.
Signed-off-by: NSatoshi Nagahama <sattnag@aim.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Since the introduction of the new OMAP DSS DVI connector driver in
commit 348077b1 ("OMAPDSS: Add new DVI
Connector driver"), DVI outputs report a new display type of
OMAP_DISPLAY_TYPE_DVI instead of OMAP_DISPLAY_TYPE_DPI. Handle the new
type in the IRQ handler.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

New board addition. No other changes.

[m.chehab@samsung.com: rebase patch and fix whitespace mangling]
Signed-off-by: NPojar George <geoubuntu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

These chips makes use of the media_entity in the v4l2_subdev struct
and is therefor dependent of the  MEDIA_CONTROLLER config.
Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix this linker warning:
WARNING: "__divdi3" [media_build/v4l/drx39xyj.ko] undefined!

[m.chehab@samsung.com: add include for asm/div64.h]
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

try_fmt should just set field to NONE and not return an error if
a different field was passed.

buf_prepare should check if the field passed in from userspace has a
supported field value. At the moment only NONE is supported and ANY
is mapped to NONE.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

- Set the sequence counters correctly.
- Copy timestamps, timecode, relevant buffer flags and field from
  the received buffer to the outgoing buffer.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

To keep the vb2 buffer administration in balance stop_streaming() must
return any pending buffers to the vb2 framework.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>