Modules: Documentation

Add the notes on PM to ens1370/ens1371 sections.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Updated the description of ice1724 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,Intel8x0 driver

Added MCP51 PCI ID to intel8x0 driver.
Also, updated the supported chips in documentation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,PCI drivers,Digigram PCXHR driver

Add Digigram PCXHR driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Fix all places in the docs where the card number limit is mentioned.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Documentation

Mark the drivers newly supporting PM in the documentation.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Fix a wrong option value for ac97_quirk option in the document.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,CS5535 driver

Minor clean up and fixes for CS5535 audio driver.
Added an entry in ALSA-Configuration.txt, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,ALI5451 driver,NM256 driver

Removed multi-card supports for ali5451 and nm256 drivers.
They are supposed to be a single device.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Add description about a new option of nm256 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the code for supporting eight cards from the integrated
controller drivers because There Can Be Only One controller of
each type per mainboard.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Documentation

Added description for ALC260 codec models in hda-intel driver section.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,Intel8x0 driver
Added buggy_semaphore module option to snd-intel8x0 driver
for a workaround for hardwards with buggy codec semaphores.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ALSA<-OSS emulation
Added 'buggy-ptr' proc option to switch the behavior of GETOPTR ioctl.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation
Update/fix ALSA document.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation
move the AD1889 driver docs to the kernel tree, too
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

The attached patch fixes the following spelling errors in Documentation/
        - double "the"
        - Several misspellings of function/functionality
        - infomation
        - memeory
        - Recieved
        - wether
and possibly others which I forgot ;-)
Trailing whitespaces on the same line as the typo are also deleted.
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Documentation
Added clockfreq module option for the card with a different clock frequency
than 33kHz.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ARM,/arm/Makefile,ARM PXA2XX driver
Added ARM PXA2xx AC97 driver by Nicolas Pitre
(moved from alsa-driver tree).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,SPARC,/sparc/Makefile
Add the DBRI driver on Sparcs by Martin Habets <mhabets@users.sourceforge.net>
(moved from alsa-driver tree).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,PCMCIA Kconfig,Digigram VX Pocket driver
- Fixed Oops with request_firmware()
- Detect the card type in runtime (vxpoocket v2 or 440)
- snd-vxp440 driver is merged to snd-vxpocket
- Clean up the code
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver
- Added a new '6stack' model for ALC880.
- Fixed the typo in 6stack-digout model name.
- Added description for missing models in ALSA-Configuration.txt.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
  init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
  and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
  Use this model as default, and 3-stack as fallback
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation
Added documentation for HDSP MADI driver by Winfried Ritsch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,Memalloc module,RME HDSP driver,RME9652 driver
Add the write support to snd-page-alloc proc file for buffer pre-allocation.
Removed the pre-allocation codes via module options.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ICE1724 driver
Add the support of Chaintech AV-710 to ice1724 driver.
The patch includes the WM-codec initialization fix by
Jaanus Kivistik <jaanus@no.spam.ee>.

Since both AV-710 and AMP Audio2000 have the same SSID, initialize
WM codecs as default for both devices.  In case it breaks Audio2000,
you can pass 'model=amp2000' option to avoid WM codec initialization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation
Fixed/improved a comment about dxs_support option for via82xx driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,ICE1712 driver
Updated the documentation for ice1712 and ice1724 drivers.
Added the device description for shuttle SN25P missing in the last patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
Added the support of VIA VT8251/VT8237A HD-Audio controllers.
They are (almost) compatible with Intel ICH6/7.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
This patch changes the Intel HD Audio device driver to include
the support of HD Audio device embedded in ATI south bridge
IXP450. Because the design of ATI chipset follows intel HD Audio
specification 1.0, the programming method is the same as that
of intel HD Audio device exception one minor change which requires
to enable snoop for DMA transport. There are 3 changes that have been
made to hda_intel.c file.
  1. Added device ID for ATI HD Audio device;
  2. Increase maximum CODEC supported to 4;
  3. Enable snoop during the driver initialization.
Signed-off-by: NFrederick Li <fli@ati.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Intel driver
Added position_fix module option to HDA-intel driver for fixing up
the DMA position (possibly hardware-) bugs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,VIA82xx driver
Add support for full sample rate conversion capabilities of DXS
channels present in VIA VT8233/5/7 controllers:

- any sample rate in the 8000 ... 48000 Hz range is supported even if
  the AC'97 codec supports only 48000 Hz output;

- different DXS channels can use different sample rates at the same
  time (the controller performs required sample rate conversion and
  mixing in hardware).
Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!