Linus noticed that the 'pp' variable can be eliminated
altogether, and the loop can be cleaned up further.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

- separate out the loop from the actual freeing logic, this wins us
  two indentation levels allowing a number of followup prettifications

- turn the WARN_ON() into a more informative WARN().

- clean up the comments and the code flow some more

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- make printk message git-greppable
- fix a few style details
Signed-off-by: NIngo Molnar <mingo@elte.hu>

request_irq() calls into proc code via __setup_irq() which is not safe
in an atomic context, so request_irq() can itself use the more
reliable GFP_KERNEL allocation for the action descriptor.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a shared interrupt debug facility under CONFIG_DEBUG_SHIRQ:
it uses the existing irqpoll facilities to iterate through all
registered interrupt handlers and call those which can handle shared
IRQ lines.

This can be handy for suspend/resume debugging: if we call this function
early during resume we can trigger crashes in those drivers which have
incorrect assumptions about when exactly their ISRs will be called
during suspend/resume.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: sched_slice() fixlet
  sched: fix update_min_vruntime
  sched: SCHED_OTHER vs SCHED_IDLE isolation
  sched: SCHED_IDLE weight change
  sched: fix bandwidth validation for UID grouping
  Revert "sched: improve preempt debugging"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix UP build failure.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (95 commits)
  b44: GFP_DMA skb should not escape from driver
  korina: do not use IRQF_SHARED with IRQF_DISABLED
  korina: do not stop queue here
  korina: fix handling tx_chain_tail
  korina: do tx at the right position
  korina: do schedule napi after testing for it
  korina: rework korina_rx() for use with napi
  korina: disable napi on close and restart
  korina: reset resource buffer size to 1536
  korina: fix usage of driver_data
  bnx2x: First slow path interrupt race
  bnx2x: MTU Filter
  bnx2x: Indirection table initialization index
  bnx2x: Missing brackets
  bnx2x: Fixing the doorbell size
  bnx2x: Endianness issues
  bnx2x: VLAN tagged packets without VLAN offload
  bnx2x: Protecting the link change indication
  bnx2x: Flow control updated before reporting the link
  bnx2x: Missing mask when calculating flow control
  ...

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to probe
  hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX
  hwmon: (abituguru3) Match partial DMI board name strings
  hwmon: Add a driver for the ADT7475 hardware monitoring chip
  hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs
  hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs
  hwmon: (k8temp) Warn about fam F rev F errata

If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set
to n and the RDMA CM functions rdma_connect() et al are not built.
However, the current config dependencies allow NET_9P_RDMA to be selected
in this, which leads to a build failure.  Fix this by adding a dependency
on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We used to just write changed page for IS_DIRSYNC inodes.  But we also
have to update the directory inode itself just for the case that we've
allocated a new block and changed i_size.

[akpm@linux-foundation.org: still sync the data page]
Signed-off-by: NJan Kara <jack@suse.cz>
Tested-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Carry out the PM-routine interface change in the USB OTG pathway.  This
was omitted from the earlier interface-change patch by mistake.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: fix 15 make headers_check warnings:

include of <linux/types.h> is preferred over <asm/types.h>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60)

echo 10 > /memcg/0/swappiness   |
  mem_cgroup_swappiness_write() |
    ...                         | echo 1 > /memcg/0/use_hierarchy
                                | mkdir /mnt/0/1
                                |   sub_memcg->swappiness = 60;
    memcg->swappiness = 10;     |

In the above scenario, we end up having 2 different swappiness
values in a single hierarchy.

We should hold cgroup_lock() when cheking cgrp->children list.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At system boot when creating the top cgroup, mem_cgroup_create() calls
enable_swap_cgroup() which is marked as __init, so mark
mem_cgroup_create() as __ref to avoid false section mismatch warning.
Reported-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LED on HP notebooks is connected through ACPI.  That unfortunately
means that it needs to be delayed by using schedule_work() to avoid
calling the ACPI interpreter from an invalid context.

[akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it]
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix lis3 documentation to fit into 80 columns.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the second part of the HP laptop disk protection functionality (a red
led) to the same driver.  From a purely Linux developer's point of view,
the led and the accelerometer have nothing related.  However, they
correspond to the same ACPI functionality, and so will always be used
together, moreover as they share the same ACPI PNP alias, there is no
other simple to allow to have same loaded at the same time if they are not
in the same module.  Also make it requires the led class to compile and
update the Kconfig text.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

David points out that the idr_remove_all() function returns unused slabs
to the kmem cache, but needs to zero them first or else they will be
uninitialized upon next use.  This causes crashes which have been observed
in the firewire subsystem.

He fixed this by zeroing the object before freeing it in idr_remove_all().

But we agree that simply removing the constructor and zeroing the object
at allocation time is simpler than relying upon slab constructor machinery
and might even be faster.

This problem was introduced by "idr: make idr_remove rcu-safe" (commit
cf481c20), which was first released in
2.6.27.

There are no known codesites which trigger this bug in 2.6.27 or 2.6.28.
The post-2.6.28 firewire changes are the only known triggerer.

There might of course be not-yet-discovered triggerers in 2.6.27 and
2.6.28, and there might be out-of-tree triggerers which are added to those
kernel versions.  I'll let the -stable guys decide whether they want to
backport this fix.
Reported-by: NDavid Moore <dcm@acm.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kristian Hgsberg <krh@redhat.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As it's just a single call to __get_free_page().
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike other alphas, marvel doesn't have real PC-style CMOS clock hardware
- RTC accesses are emulated via PAL calls.  Unfortunately, for unknown
reason these calls work only on CPU #0.  So current implementation for
arbitrary CPU makes CMOS_READ/WRITE to be executed on CPU #0 via IPI.
However, for obvious reason this doesn't work with standard
get/set_rtc_time() functions, where a bunch of CMOS accesses is done with
disabled interrupts.

Solved by making the IPI calls for entire get/set_rtc_time() functions,
not for individual CMOS accesses.  Which is also a lot more effective
performance-wise.

The patch is largely based on the code from Jay Estabrook.
My changes:
- tweak asm-generic/rtc.h by adding a couple of #defines to
  avoid a massive code duplication in arch/alpha/include/asm/rtc.h;
- sys_marvel.c: fix get/set_rtc_time() return values (Jay's FIXMEs).

NOTE: this fixes *only* LIB_RTC drivers.  Legacy (CONFIG_RTC) driver
wont't work on marvel.  Actually I think that we should just disable
CONFIG_RTC on alpha (maybe in 2.6.30?), like most other arches - AFAIK,
all modern distributions use LIB_RTC anyway.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently introduced generic pci_common_swizzle() relies on bus->self
being NULL for the root PCI bus. But on nautilus bus->self points to
the host bridge device, which is necessary as we do a root bus sizing
on this system. As a result, pci_common_swizzle() loops infinitely.
This worked until 2.6.29-rc1 because the alpha-specific swizzle routine
checked for bus->parent == NULL (instead of bus->self).

Fixed by clearing bus->self after bus sizing is done.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

init_srm_irq() deals with irq's #16 and above, but size of irq_desc
array on nautilus and some other system types is 16. So gcc-4.3
complains that "array subscript is above array bounds", even though
this function is never called on those systems.

This adds a check for NR_IRQS <= 16, which effectively optimizes
init_srm_irq() code away on problematic platforms.

Thanks to Daniel Drake <dsd@gentoo.org> for detailed analysis
of the problem.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit e97a630e ("mm: vmalloc use
mutex for purge")

Bryan Donlan reports:

: After testing 2.6.29-rc1 on xen-x86 with a btrfs root filesystem, I
: got the OOPS quoted below and a hard freeze shortly after boot.
: Boot messages and config are attached.
:
: ------------[ cut here ]------------
: Kernel BUG at c05ef80d [verbose debug info unavailable]
: invalid opcode: 0000 [#1] SMP
: last sysfs file: /sys/block/xvdc/size
: Modules linked in:
:
: Pid: 0, comm: swapper Not tainted (2.6.29-rc1 #6)
: EIP: 0061:[<c05ef80d>] EFLAGS: 00010087 CPU: 2
: EIP is at schedule+0x7cd/0x950
: EAX: d5aeca80 EBX: 00000002 ECX: 00000000 EDX: d4cb9a40
: ESI: c12f5600 EDI: d4cb9a40 EBP: d6033fa4 ESP: d6033ef4
:  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
: Process swapper (pid: 0, ti=d6032000 task=d6020b70 task.ti=d6032000)
: Stack:
:  000d85bc 00000000 000186a0 00000000 0dd11410 c0105417 c12efe00 0dc367c3
:  00000011 c0105d46 d5a5d310 deadbeef d4cb9a40 c07cc600 c05f1340 c12e0060
:  deadbeef d6020b70 d6020d08 00000002 c014377d 00000000 c12f5600 00002c22
: Call Trace:
:  [<c0105417>] xen_force_evtchn_callback+0x17/0x30
:  [<c0105d46>] check_events+0x8/0x12
:  [<c05f1340>] _spin_unlock_irqrestore+0x20/0x40
:  [<c014377d>] hrtimer_start_range_ns+0x12d/0x2e0
:  [<c014c4f6>] tick_nohz_restart_sched_tick+0x146/0x160
:  [<c0107485>] cpu_idle+0xa5/0xc0

and bisected it to this commit.

Let's remove it now while we have a think about the problem.
Reported-by: NBryan Donlan <bdonlan@gmail.com>
Tested-by: NChristophe Saout <christophe@saout.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In previous implementation, mem_cgroup_try_charge checked the return
value of mem_cgroup_try_to_free_pages, and just retried if some pages
had been reclaimed.
But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it)
only checks whether the usage is less than the limit.

This patch tries to change the behavior as before to cause oom less
frequently.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If root_mem has no children, last_scaned_child is set to root_mem itself.
But after some children added to root_mem, mem_cgroup_get_next_node can
mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get.

This patch fixes this behavior by:

- Set last_scanned_child to NULL if root_mem has no children or DFS
  search has returned to root_mem itself(root_mem is not a "child" of
  root_mem).  Make mem_cgroup_get_first_node return root_mem in this case.
   There are no mem_cgroup_get/put for root_mem.

- Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and
  mem_cgroup_get_first_node to mem_cgroup_get_next_node.  Make
  mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in error path of mem_cgroup_move_parent.

Extra refcnt got from try_charge should be dropped, and usages incremented
by try_charge should be decremented in both error paths:

    A: failure at get_page_unless_zero
    B: failure at isolate_lru_page

This bug makes this parent directory unremovable.

In case of A, rmdir doesn't return, because res.usage doesn't go down to 0
at mem_cgroup_force_empty even after all the pc in lru are removed.

In case of B, rmdir fails and returns -EBUSY, because it has extra ref
counts even after res.usage goes down to 0.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case of swapin, a new page is added to lru before it is charged,
so page->pc->mem_cgroup points to NULL or last mem_cgroup the page
was charged before.

In the latter case, if the mem_cgroup has already freed by rmdir,
the area pointed to by page->pc->mem_cgroup may have invalid data.

Actually, I saw general protection fault.

    general protection fault: 0000 [#1] SMP
    last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map
    CPU 4
    Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode]
    Pid: 26038, comm: page01 Tainted: G        W  2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1
    RIP: 0010:[<ffffffff8028e710>]  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
    RSP: 0000:ffff8801ee457da8  EFLAGS: 00010002
    RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8
    RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28
    RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001
    R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000
    R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2
    FS:  00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960)
    Stack:
     ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17
     ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000
     ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8
    Call Trace:
     [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c
     [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89
     [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98
     [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741
     [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c
     [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c
     [<ffffffff804d860f>] ? page_fault+0x1f/0x30
    Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54
    RIP  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
     RSP <ffff8801ee457da8>
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later)
changed to report 10 bytes instead the earlier 6, and the sensor encoding
subsequently changed.  As a result, the reported light sensors readings
are much too low.

Via experiments leading up to this patch, it seems only the ALV0 is
reporting data, and the most useful value therein is a 10-bit big-endian
value at offset 6.  This suggests that a new protocol was added as a
backward-compatible replacement on top of the old one.

This patch makes applesmc report the improved light sensor reading for the
new machines, on a scale in conformance with earlier ones.
Signed-off-by: NAlex Murray <murray.alex@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the general use case struct seq_operations should be a const object.
Check for and warn where it is not.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should not be continuing a braced section with an if, for example:

	if (...) {
	} if (...) {
	}

Detect this and suggest adding a newline.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we allow return to have surrounding parentheses when containing
comparison operators we are not correctly handling the case where the
values contain array sufffixes.  Squash them.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should not be complaining about the prefix spacing for types and casts.
 We are triggering here because the check for spacing between '*'s is
overly loose.  Tighten this up.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the #if opening statement is not in the context then the context stack
can be empty.  Handle this by ensuring there is always a blank entry in
the stack.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Tested-by: NDhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Two nbd-clients at same time are bad idea, and cause WARN_ON from nbd in
2.6.28-rc7 from sysfs_add_one.  This simply prevents that from happening.

To reproduce:

 cat /dev/zero | head -c 10000000 > /tmp/delme.fstest.fs
 nbd-server 9100 -l /anyone.can.connect > /tmp/delme.fstest.fs &
 sleep 1
 nbd-client localhost 9100 /dev/nd0 &
 nbd-client localhost 9100 /dev/nd0 &
Signed-off-by: NPavel Machek <pavel@suse.cz>
Acked-by: NPaul Clements <paul.clements@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the standard magic.h for btrfs and squashfs.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that people are using freezer for non-suspend/hibernation stuff, it
should have separate maintainers entry so that it is easier to find.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>