- 26 9月, 2006 29 次提交
-
-
由 Kim Phillips 提交于
update mpc8349_itx_defconfig and turn off some debug settings Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
The smt_snooze_delay logic changed a bit when the idle loops were consolidated. A value of 0 used to mean we always polled, now it means we always sleep. Instead of restoring the old behaviour, lets put a reasonable default in smt_snooze_delay. This means we spin for a bit (in case an external interrupt comes in) and then sleep. Also the pseries dedicated idle loop currently does not cede both threads in an SMT pair. The hypervisor wants us to call in so it can power manage, so lets do that. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
There's a bug in irq_alloc_virt() if it's asked for more than 1 interrupt, if it can't find a slot it might look past the end of the irq_map. To be clear: the bug is that the continue affects the inner for loop, not the outer one, so i becomes j + 1 and then we continue the inner loop without checking if i is still <= limit. This fixes it. No one in the kernel actually calls this with count > 1, so it's not critical. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
The secure_computing() call which automatically aborts a process if it tries to execute a syscall it shouldn't is much more useful if we actually do it _before_ the syscall, rather than afterwards. PPC64 got this right, but the original incorrect behaviour inherited from arch/ppc was preserved by ifdefs. Make it the same on PPC32 too. Also, I see no need to export do_syscall_trace_{leave,enter} on ppc32 -- they were only exported because the old do_syscall_trace() (which they replaced) used to be. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
Due to my stupidity, we were checking for the wrong bit in CCR when attempting to determine whether a syscall succeeded or not. Remedy the symptom, if not the cause. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NetLabel]: update docs with website information [NetLabel]: rework the Netlink attribute handling (part 2) [NetLabel]: rework the Netlink attribute handling (part 1) [Netlink]: add nla_validate_nested() [NETLINK]: add nla_for_each_nested() to the interface list [NetLabel]: change the SELinux permissions [NetLabel]: make the CIPSOv4 cache spinlocks bottom half safe [NetLabel]: correct improper handling of non-NetLabel peer contexts [TCP]: make cubic the default [TCP]: default congestion control menu [ATM] he: Fix __init/__devinit conflict [NETFILTER]: Add dscp,DSCP headers to header-y [DCCP]: Introduce dccp_probe [DCCP]: Use constants for CCIDs [DCCP]: Introduce constants for CCID numbers [DCCP]: Allow default/fallback service code.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SOUND] sparc/amd7930: Use __devinit and __devinitdata as needed. [SUNLANCE]: Mark sparc_lance_probe_one as __devinit. [SPARC64]: Fix section-mismatch errors in solaris emul module.
-
由 Jonathan Corbet 提交于
The v4l2 API documentation for VIDIOC_ENUMSTD says: To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. The actual code, however, tests the index this way: if (index<=0 || index >= vfd->tvnormsize) { ret=-EINVAL; So any application which passes in index=0 gets EINVAL right off the bat - and, in fact, this is what happens to mplayer. So I think the following patch is called for, and maybe even appropriate for a 2.6.18.x stable release. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ed Swierk 提交于
Invoking load_module() before param_sysfs_init() is called crashes in mod_sysfs_setup(), since the kset in module_subsys is not initialized yet. In my case, net-pf-1 is getting modprobed as a result of hotplug trying to create a UNIX socket. Calls to hotplug begin after the topology_init initcall. Another patch for the same symptom (module_subsys-initialize-earlier.patch) moves param_sysfs_init() to the subsys initcalls, but this is still not early enough in the boot process in some cases. In particular, topology_init() causes /sbin/hotplug to run, which requests net-pf-1 (the UNIX socket protocol) which can be compiled as a module. Moving param_sysfs_init() to the postcore initcalls fixes this particular race, but there might well be other cases where a usermodehelper causes a module to load earlier still. The patch makes load_module() return an error rather than crashing the kernel if invoked before module_subsys is initialized. Cc: Mark Huang <mlhuang@cs.princeton.edu> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 keith mannthey 提交于
If there is only 1 node in the system cpus should think they are apart of some other node. If cases where a real numa system boots the Flat numa option make sure the cpus don't claim to be apart on a non-existent node. Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
Assume that a cpu is *physically* offlined at boot time... Because smpboot.c::smp_boot_cpu_map() canoot find cpu's sapicid, numa.c::build_cpu_to_node_map() cannot build cpu<->node map for offlined cpu. For such cpus, cpu_to_node map should be fixed at cpu-hot-add. This mapping should be done before cpu onlining. This patch also handles cpu hotremove case. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
Problem description: We have additional_cpus= option for allocating possible_cpus. But nid for possible cpus are not fixed at boot time. cpus which is offlined at boot or cpus which is not on SRAT is not tied to its node. This will cause panic at cpu onlining. Usually, pxm_to_nid() mapping is fixed at boot time by SRAT. But, unfortunately, some system (my system!) do not include full SRAT table for possible cpus. (Then, I use additiona_cpus= option.) For such possible cpus, pxm<->nid should be fixed at hot-add. We now have acpi_map_pxm_to_node() which is also used at boot. It's suitable here. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Hanselmann 提交于
Seems like not all drivers use the framebuffer_alloc() function and won't have an initialized mutex. But those don't have a backlight, anyway. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Cc: Olaf Hering <olaf@aepfle.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Daniel R Thompson <daniel.thompson@st.com> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Rientjes 提交于
Stops panic associated with attempting to free a non slab-allocated per_cpu_pageset. Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 keith mannthey 提交于
With CONFIG_PHYSICAL_START set to a non default values the i386 boot_ioremap code calculated its pte index wrong and users of boot_ioremap have their areas incorrectly mapped (for me SRAT table not mapped during early boot). This patch removes the addr < BOOT_PTE_PTRS constraint. [ Keith says this is applicable to 2.6.16 and 2.6.17 as well ] Signed-off-by: Keith Mannthey<kmannth@us.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: <stable@kernel.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Zijlstra 提交于
BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted) [<c04051ee>] show_trace_log_lvl+0x58/0x171 [<c0405802>] show_trace+0xd/0x10 [<c040591b>] dump_stack+0x19/0x1b [<c043abee>] trace_hardirqs_on+0xa2/0x11e [<c06143c3>] _spin_unlock_irq+0x22/0x26 [<c0541540>] rtc_get_rtc_time+0x32/0x176 [<c0419ba4>] hpet_rtc_interrupt+0x92/0x14d [<c0450f94>] handle_IRQ_event+0x20/0x4d [<c0451055>] __do_IRQ+0x94/0xef [<c040678d>] do_IRQ+0x9e/0xbd [<c0404a49>] common_interrupt+0x25/0x2c DWARF2 unwinder stuck at common_interrupt+0x25/0x2c Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ian Kent 提交于
If the timeout of an autofs mount is set to zero then umounts are disabled. This works fine, however the kernel module checks the expire timeout and goes no further if it is zero. This is not the right thing to do at shutdown as the module is passed an option to expire mounts regardless of their timeout setting. This patch allows autofs to honor the force expire option. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
Fixes section-mismatch errors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fixes section mismatch warnings when built as a module. Also, mark find_ledma and sun4 init function as __devinit too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
init_socksys() was marked __init but invoked from a non-__init function. Use the correct module_{init,exit}() faciltiies while we're here and eliminate some seriously bogus ifdefs. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Now that all of the supporting pieces of NetLabel have a home at SourceForge update the Kconfig help text and add an entry to the MAINTAINERS file. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes to better follow the common Netlink attribute usage. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes to better follow the common Netlink attribute usage. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Add a new function, nla_validate_nested(), to validate nested Netlink attributes. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
At the top of include/net/netlink.h is a list of Netlink interfaces, however, the nla_for_each_nested() macro was not listed. This patch adds this interface to the list at the top of the header file. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Change NetLabel to use the 'recvfrom' socket permission and the SECINITSID_NETMSG SELinux SID as the NetLabel base SID for incoming packets. This patch effectively makes the old, and currently unused, SELinux NETMSG permissions NetLabel permissions. Signed-of-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
The CIPSOv4 cache traversal routines are triggered both the userspace events (cache invalidation due to DOI removal or updated SELinux policy) and network packet processing events. As a result there is a problem with the existing CIPSOv4 cache spinlocks as they are not bottom-half/softirq safe. This patch converts the CIPSOv4 cache spin_[un]lock() calls into spin_[un]lock_bh() calls to address this problem. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
Fix a problem where NetLabel would always set the value of sk_security_struct->peer_sid in selinux_netlbl_sock_graft() to the context of the socket, causing problems when users would query the context of the connection. This patch fixes this so that the value in sk_security_struct->peer_sid is only set when the connection is NetLabel based, otherwise the value is untouched. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
They all contain the same thing. Instead, have a single generic one in include/asm-generic, and permit an arch to override as needed. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 25 9月, 2006 11 次提交
-
-
由 Stephen Hemminger 提交于
Change default congestion control used from BIC to the newer CUBIC which it the successor to BIC but has better properties over long delay links. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Change how default TCP congestion control is chosen. Don't just use last installed module, instead allow selection during configuration, and make sure and use the default regardless of load order. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
he_init_one() is declared __devinit, but calls lots of init functions that are marked __init. However, if CONFIG_HOTPLUG is enabled, __devinit functions go into normal .text, which leads to WARNING: drivers/atm/he.o - Section mismatch: reference to .init.text: from .text between 'he_start' (at offset 0x2130) and 'he_service_tbrq' Fix this by changing the __init functions to __devinit. Signed-off-by: NRoland Dreier <roland@digitalvampire.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
To whoever had written that code: a) priority of >> is higher than that of & b) priority of typecast is higher than that of any binary operator c) learn the fscking C Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
ql3xxx_probe() does ioremap and stores result in ->mem_map_registers. On failure exit it does iounmap() of the same thing. OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is (a) never assigned and (b) never used other than in that iounmap() call. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
the driver is still shite, though... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthew Wilcox 提交于
Some user tools parse /proc/scsi/scsi, so we can't yet change the names. Change the existing ones back to their old names, and add an admonition to not make the same mistake that I did. Andrew Morton reports that this was breaking YDL 4.1 userspace. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
-
由 Yasuyuki Kozakai 提交于
This patch adds xt_dscp.h and xt_DSCP.h to the kernel headers which are exported via 'make headers_install'. These are necessary for userspace to add rules using dscp match and DSCP target. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-