- 20 2月, 2006 1 次提交
-
-
由 Paul Mackerras 提交于
This fixes a regression which was introduced by moving ppc32 to use the same sort of lockless gettimeofday as ppc64 has been using for some time. This involves getting the timebase and performing some simple arithmetic to convert it to seconds and microseconds. However, the factor and offset used there weren't being updated when NTP varied the tick length using adjtimex. 64-bit didn't notice the problem because it had a hook in the 32-bit adjtimex compat routine that attempted to work out what the generic timekeeping code would do and alter the factor and offset to match. However, that code was very complex and it wasn't clear that it still matched what the generic code would do. Now we use the generic current_tick_length() routine that was recently added to check that the current tick will be as long as we expect; if not we recompute the factor and offset. This keeps gettimeofday and xtime in sync. In addition we check that gettimeofday hasn't got ahead of xtime on each timer interrupt; if it has, we resync. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 2月, 2006 1 次提交
-
-
由 Olaf Hering 提交于
remove pointer/integer confusion Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 1月, 2006 1 次提交
-
-
由 David Gibson 提交于
At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2006 1 次提交
-
-
由 David Gibson 提交于
This patch removes several unnecessary fields from the paca: - next_jiffy_update_tb was simply unused. Remove trivially. - The exdsi exception save area was not used. There were plans to use it, but they never seem to have gone anywhere. If they ever do, we can put it back. Remove from the paca, and from asm-offsets.c - The default_decr field was used from asm, but was only ever assigned the value of tb_ticks_per_jiffy. Just access tb_ticks_per_jiffy from asm directly instead. Built and booted on POWER5 LPAR and iSeries RS64. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 18 11月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 11 11月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch moves the vdso's to arch/powerpc, adds support for the 32 bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds some new (still untested) routines to both vdso's: clock_gettime() with support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same clocks) and get_tbfreq() for glibc to retreive the timebase frequency. Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits returns a long long (r3, r4) not a long. This is such that if we ever add support for >4Ghz timebases on ppc32, the userland interface won't have to change. I have tested gettimeofday() using some glibc patches in both ppc32 and ppc64 kernels using 32 bits userland (I haven't had a chance to test a 64 bits userland yet, but the implementation didn't change and was tested earlier). I haven't tested yet the new functions. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 11月, 2005 2 次提交
-
-
由 Paul Mackerras 提交于
We were getting the last_jiffy per-cpu variable set ahead of the current timebase in smp_space_timers on SMP machines. This caused the loop in timer_interrupt to loop virtually forever, since tb_ticks_since assumes that it will never be called with the timebase behind the last_jiffy value. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 11月, 2005 2 次提交
-
-
由 Olof Johansson 提交于
Two CONFIG_SMP=n build fixes due to missing <asm/smp.h> includes. Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
Mostly this involves adding #include <asm/smp.h>, since that defines things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which are SMP-related but still needed on UP. This incorporates fixes posted by Olof Johansson and Heikki Lindholm. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 11月, 2005 2 次提交
-
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
由 Kelly Daly 提交于
Signed-off-by: NKelly Daly <kelly@au.ibm.com>
-
- 31 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
This fixes a bug where settimeofday would set the wrong parameters in do_gtod, resulting in gettimeofday returning a value about 4 hours after the correct time. The bug was that we divided a negative 64-bit value with do_div, which treated it as unsigned and gave us a result that was approximately 1.8e10 too large (since the divisor was 1e9). Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 10月, 2005 2 次提交
-
-
由 Kumar Gala 提交于
We need to initialize some control SPRS for timers on Book-E before we start taking decrementer interrupts. Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
Its valid for ppc_md.set_rtc_time to be NULL. We need to check that its non-NULL before trying to update the RTC. Signed-off-by: NKumar K. Gala <kumar.gala@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
The 601 doesn't have the timebase register; instead it has an RTCL register that counts nanoseconds and wraps at 1000000000, and an RTCU register that counts seconds. This makes the necessary changes for the merged time code to use the RTCL/U registers when the kernel is running on a 601. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
This moves smp_space_timers from arch/ppc64/kernel/smp.c to arch/powerpc/kernel/time.c and makes it initialize last_jiffy[] instead of paca[].next_jiffy_update_tb, since last_jiffy[] is now what the time code uses. It also declares smp_space_timers in include/asm-powerpc/time.h and gets rid of an ifdef in div128_by_32. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 20 10月, 2005 3 次提交
-
-
由 Paul Mackerras 提交于
I had the sense of the test for when to use the old 601-style RTC registers inverted. pmac_calibrate_decr and via_calibrate_decr weren't setting ppc_tb_freq, on which all the further calculations depended. Lastly, update_gtod was losing the top 32 bits of the new tb_to_xs value. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Previously the individual xxx_calibrate_decr functions would each print the timebase and cpu frequency and calculate several values such as tb_to_us and tb_to_xs. This moves those printks and calculations into time_init just after the call to the platform's calibrate_decr function. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 9月, 2005 1 次提交
-
-
由 Michael Ellerman 提交于
Add the /cpus node and nodes for each cpu, as well as cache size properties, reg propery, "linux,boot-cpu", and timebase/clock frequency. With those properties in place we can remove: - setup_iSeries_cache_sizes() - code in iSeries_setup_arch() to calculate timebase etc. - iSeries_calibrate_decr() - smp_iSeries_numProcs() and simplify smp_iSeries_probe() Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 21 9月, 2005 1 次提交
-
-
由 Kumar Gala 提交于
On ppc64 timer_interrupt() returned a value that was never used. Changed the ppc64 version of timer_interrupt() to no longer return a value so that the signatures between ppc32 & ppc64 match. This will simplify future merging of arch/powerpc. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 9月, 2005 1 次提交
-
-
由 john stultz 提交于
This patch cleans up a commonly repeated set of changes to the NTP state variables by adding two helper inline functions: ntp_clear(): Clears the ntp state variables ntp_synced(): Returns 1 if the system is synced with a time server. This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc, sparc64. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 9月, 2005 1 次提交
-
-
由 Kumar Gala 提交于
Removed PPC64 architecture specific users of asm/segment.h. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 29 8月, 2005 3 次提交
-
-
由 Stephen Rothwell 提交于
Make firmware_has_feature() evaluate at compile time for the non pSeries case and tidy up code where possible. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Create the firmware_has_feature() inline and move the firmware feature stuff into its own header file. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
The firmware_features field of struct cpu_spec should really be a separate variable as the firmware features do not depend on the chip and the bitmask is constructed independently. By removing it, we save 112 bytes from the cpu_specs array and we access the bitmask directly instead of via the cur_cpu_spec pointer. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 6月, 2005 4 次提交
-
-
由 Michael Ellerman 提交于
Currently we count the number of lpevents processed in 3 seperate places. One of these counters is never read, so just remove it. This means hvlpevent_queue_process() no longer needs to return the number of events processed. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Now that we've renamed the xItLpQueue structure, rename the functions that operate on it also. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Because there's only one ItLpQueue and we know where it is, ie. xItLpQueue, there's no point passing pointers to it it around all over the place. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The iSeries code keeps a pointer to the ItLpQueue in its paca struct. But all these pointers end up pointing to the one place, ie. xItLpQueue. So remove the pointer from the paca struct and just refer to xItLpQueue directly where needed. The only complication is that the spread_lpevents logic was implemented by having a NULL lpqueue pointer in the paca on CPUs that weren't supposed to process events. Instead we just compare the spread_lpevents value to the processor id to get the same behaviour. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 6月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch adds a couple of missing symbol exports. flush_dcache_page is used by the AGP driver and rtc_lock by the RTC driver. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2005 1 次提交
-
-
由 Arnd Bergmann 提交于
pSeries and maple have almost the same code for calibrate_decr, and BPA would need yet another copy. Instead, I'm moving the code to arch/ppc64/kernel/time.c. Some of the related declarations were missing from header files, so I'm moving those as well. It makes sense to merge this with the pmac function of the same name, so we end up having just one implemetation for iSeries and one for Open Firmware based machines. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 01 6月, 2005 1 次提交
-
-
由 Anton Blanchard 提交于
We used to have an iseries specific profiler that used /proc/profile. Now thats gone we can use the generic timer based stuff. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 5月, 2005 1 次提交
-
-
由 Stephen Rothwell 提交于
On PPC64, we keep track of when we need to update jiffies (and the variables used to calculate the time of day) based on the time base. If the time base frequence is sufficiently high compared to the processor clock frequency, then it is possible for the time of day variables to be corrupted at the time of the first decrementer interrupt we take. This became obvious on a legacy iSeries where the time base frequency is the same as the processor clock. This one line patch fixes the initialisation so that the time of day variables and the indicator we use to tell when updates are due are better synchronised. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
由 Anton Blanchard 提交于
Use smp_mb and smp_wmb. In particular smp_wmb is lighter weight than wmb. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-