- 10 10月, 2014 1 次提交
-
-
由 Zhang Rui 提交于
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
- 22 9月, 2014 1 次提交
-
-
由 Ulf Hansson 提交于
The ->detach() callback for the PM domain has now been fully adopted, thus there no users left of the acpi_dev_pm_detach() API. This allow us to convert it into a static function. Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 23 7月, 2014 1 次提交
-
-
由 Lv Zheng 提交于
This patch moves <acpi/acpi.h> out of CONFIG_ACPI condition so that all ACPICA prototypes can be seen by the CONFIG_ACPI=n Linux kernel builds. Note that we can do this because ACPICA has implemented stubs for all ACPICA prototypes that are currently referenced by the Linux kernel. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 27 6月, 2014 1 次提交
-
-
由 Lan Tianyu 提交于
ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart) operation region. It allows ACPI aml code able to access such kind of devices to implement some ACPI standard method. ACPI Spec defines some access attribute to associate with i2c protocol. AttribQuick Read/Write Quick Protocol AttribSendReceive Send/Receive Byte Protocol AttribByte Read/Write Byte Protocol AttribWord Read/Write Word Protocol AttribBlock Read/Write Block Protocol AttribBytes Read/Write N-Bytes Protocol AttribProcessCall Process Call Protocol AttribBlockProcessCall Write Block-Read Block Process Call Protocol AttribRawBytes Raw Read/Write N-BytesProtocol AttribRawProcessBytes Raw Process Call Protocol On the Asus T100TA, Bios use GenericSerialBus operation region to access i2c device to get battery info. Sample code From Asus T100TA Scope (_SB.I2C1) { Name (UMPC, ResourceTemplate () { I2cSerialBus (0x0066, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2C1", 0x00, ResourceConsumer, , ) }) ... OperationRegion (DVUM, GenericSerialBus, Zero, 0x0100) Field (DVUM, BufferAcc, NoLock, Preserve) { Connection (UMPC), Offset (0x81), AccessAs (BufferAcc, AttribBytes (0x3E)), FGC0, 8 } ... } Device (BATC) { Name (_HID, EisaId ("PNP0C0A")) // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID ... Method (_BST, 0, NotSerialized) // _BST: Battery Status { If (LEqual (AVBL, One)) { Store (FGC0, BFFG) If (LNotEqual (STAT, One)) { ShiftRight (CHST, 0x04, Local0) And (Local0, 0x03, Local0) If (LOr (LEqual (Local0, One), LEqual (Local0, 0x02))) { Store (0x02, Local1) } ... } The i2c operation region is defined under I2C1 scope. _BST method under battery device BATC read battery status from the field "FCG0". The request would be sent to i2c operation region handler. This patch is to add i2c ACPI operation region support. Due to there are only "Byte" and "Bytes" protocol access on the Asus T100TA, other protocols have not been tested. About RawBytes and RawProcessBytes protocol, they needs specific drivers to interpret reference data from AML code according ACPI 5.0 SPEC(5.5.2.4.5.3.9 and 5.5.2.4.5.3.10). So far, not found such case and will add when find real case. Signed-off-by: NLan Tianyu <tianyu.lan@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 30 5月, 2014 1 次提交
-
-
由 Zhang Rui 提交于
ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: NZhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
-
- 26 5月, 2014 1 次提交
-
-
由 Bjørn Mork 提交于
Commit 1a699476 ("ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()") added debug messages for a few common events. These debug messages are unconditionally enabled if CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented meaning, making the ACPI system spew lots of unwanted noise on any kernel with dynamic debugging. The bug was introduced by commit fbfddae6 ("ACPI: Add acpi_handle_<level>() interfaces"), which added the CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning. Fix by adding real support for dynamic_debug. Fixes: fbfddae6 ("ACPI: Add acpi_handle_<level>() interfaces") Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 5月, 2014 1 次提交
-
-
由 Heikki Krogerus 提交于
No reason for excluding the remaining ones. Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com> [rjw: Rebased and exported the new acpi_subsys_complete() too.] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 19 2月, 2014 1 次提交
-
-
由 Hanjun Guo 提交于
BAD_MADT_ENTRY() is arch independent and will be used for all architectures which parse MADT, so move it to linux/acpi.h to reduce code duplication. Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 04 2月, 2014 2 次提交
-
-
由 Bjorn Helgaas 提交于
__acpi_map_pxm_to_node() and acpi_get_pxm() are only used within drivers/acpi/numa.c. This makes them static and removes their declarations. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
acpi_get_node() takes an acpi_handle, not an "acpi_handle *". This fixes the prototype and the definitions. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 17 1月, 2014 1 次提交
-
-
由 Zhang Rui 提交于
An ACPI enumerated device may have its compatible id strings. To support the compatible ACPI ids (acpi_device->pnp.ids), we introduced acpi_driver_match_device() to match the driver->acpi_match_table and acpi_device->pnp.ids. For those drivers, MODULE_DEVICE_TABLE(acpi, xxx) is used to exports the driver module alias in the format of "acpi:device_compatible_ids". But in the mean time, the current code does not export the ACPI compatible strings as part of the module_alias for the ACPI enumerated devices, which will break the module autoloading. Take the following piece of code for example, static const struct acpi_device_id xxx_acpi_match[] = { { "INTABCD", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, xxx_acpi_match); If this piece of code is used in a platform driver for an ACPI enumerated platform device, the platform driver module_alias is "acpi:INTABCD", but the uevent attribute of its platform device node is "platform:INTABCD:00" (PREFIX:platform_device->name). If this piece of code is used in an i2c driver for an ACPI enumerated i2c device, the i2c driver module_alias is "acpi:INTABCD", but the uevent of its i2c device node is "i2c:INTABCD:00" (PREFIX:i2c_client->name). If this piece of code is used in an spi driver for an ACPI enumerated spi device, the spi driver module_alias is "acpi:INTABCD", but the uevent of its spi device node is "spi:INTABCD" (PREFIX:spi_device->modalias). The reason why the module autoloading is not broken for now is that the uevent file of the ACPI device node is "acpi:INTABCD". Thus it is the ACPI device node creation that loads the platform/i2c/spi driver. So this is a problem that will affect us the day when the ACPI bus is removed from device model. This patch introduces two new APIs, one for exporting ACPI ids in uevent MODALIAS field, and another for exporting ACPI ids in device' modalias sysfs attribute. For any bus that supports ACPI enumerated devices, it needs to invoke these two functions for their uevent and modalias attribute. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 06 1月, 2014 1 次提交
-
-
由 tangchen 提交于
The comment about return value of acpi_table_parse() is incorrect. This patch fix it. Since all callers only check if the function succeeded or not, this patch simplifies the semantics by returning -errno for all failure cases. This will also simply the comment. As suggested by Toshi Kani <toshi.kani@hp.com>, also change the stub in linux/acpi.h to return -ENODEV. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 12月, 2013 2 次提交
-
-
由 Lv Zheng 提交于
To avoid build problems and breaking dependencies between ACPI header files, <acpi/acpi.h> should not be included directly by code outside of the ACPI core subsystem. However, that is possible if <linux/acpi_io.h> is included, because that file contains a direct inclusion of <acpi/acpi.h>. For this reason, remove the direct <acpi/acpi.h> inclusion from <linux/acpi_io.h>, move that file from include/linux/ to include/acpi/ and make <linux/acpi.h> include it for CONFIG_ACPI set along with the other ACPI header files. Accordingly, Remove the inclusions of <linux/acpi_io.h> from everywhere. Of course, that causes the contents of the new <acpi/acpi_io.h> file to be available for CONFIG_ACPI set only, so intel_opregion.o that depends on it should also depend on CONFIG_ACPI (and it really should not be compiled for CONFIG_ACPI unset anyway). References: https://01.org/linuxgraphics/sites/default/files/documentation/acpi_igd_opregion_spec.pdf Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> [rjw: Subject and changelog] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Modify acpi_preset_companion() to take a struct acpi_device pointer instead of an ACPI handle as its second argument and redefine it as a static inline wrapper around ACPI_COMPANION_SET() passing the return value of acpi_find_child_device() directly as the second argument to it. Update its users to pass struct acpi_device pointers instead of ACPI handles to it. This allows some unnecessary acpi_bus_get_device() calls to be avoided. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NAaron Lu <aaron.lu@intel.com> Tested-by: Aaron Lu <aaron.lu@intel.com> # for ATA binding
-
- 15 11月, 2013 3 次提交
-
-
由 Jarkko Nikula 提交于
struct acpi_device fields are only available when CONFIG_ACPI is set. We may find use for dev_name(&adev->dev) in generic code that is build also without CONFIG_ACPI is set but currently this requires #ifdef CONFIG_ACPI churn. Provide here an accessor that returns dev_name of embedded struct device dev in struct acpi_device or NULL depending on CONFIG_ACPI setting. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Since DEVICE_ACPI_HANDLE() is now literally identical to ACPI_HANDLE(), replace it with the latter everywhere and drop its definition from include/acpi.h. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rafael J. Wysocki 提交于
Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
-
- 24 10月, 2013 1 次提交
-
-
由 Chen, Gong 提交于
This H/W error log driver (a.k.a eMCA driver) is implemented based on http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html After errors are captured, more detailed platform specific information can be got via this new enhanced H/W error log driver. Most notably we can track memory errors back to the DIMM slot silk screen label. Signed-off-by: NChen, Gong <gong.chen@linux.intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 24 9月, 2013 7 次提交
-
-
由 Bjorn Helgaas 提交于
Make PCI Host Bridge _OSC #defines more consistent. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
We write OSC_PCI_SUPPORT_MASKS as a simple 0x1f, so do the same for OSC_PCI_CONTROL_MASKS. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
OSC_PCI_NATIVE_HOTPLUG is completely unused, so remove it. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
Move the acpi_run_osc() prototype next to the related structure and update comments. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
OSC_QUERY_TYPE isn't a "type"; it's an index into the _OSC Capabilities Buffer of DWORDs. Rename OSC_QUERY_TYPE, OSC_SUPPORT_TYPE, and OSC_CONTROL_TYPE to OSC_QUERY_DWORD, etc., to make this clear. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bjorn Helgaas 提交于
Update _OSC definition comments to correspond to the 1-based spec wording (DWORD 1, etc.) Write _OSC field #defines as hex to make clear that they are bits in a 32-bit DWORD, not arbitrary values. No functional change. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Jiang Liu 提交于
Since APIC id is saved in processor struct, just use it and remove the duplicated _MAT evaluation. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 31 7月, 2013 1 次提交
-
-
由 Ben Guthro 提交于
Like acpi_os_prepare_sleep(), register a callback for use in systems like tboot, and xen, which have system specific requirements outside of ACPICA. This mirrors the functionality in acpi_os_prepare_sleep(), called from acpi_hw_sleep() Signed-off-by: NBen Guthro <benjamin.guthro@citrix.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 26 7月, 2013 1 次提交
-
-
由 Rafael J. Wysocki 提交于
We attempted to address a regression introduced by commit a57f7f91 (ACPICA: Add Windows8/Server2012 string for _OSI method.) after which ACPI video backlight support doesn't work on a number of systems, because the relevant AML methods in the ACPI tables in their BIOSes become useless after the BIOS has been told that the OS is compatible with Windows 8. That problem is tracked by the bug entry at: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Commit 8c5bd7ad (ACPI / video / i915: No ACPI backlight if firmware expects Windows 8) introduced for this purpose essentially prevented the ACPI backlight support from being used if the BIOS had been told that the OS was compatible with Windows 8 and the i915 driver was loaded, in which case the backlight would always be handled by i915. Unfortunately, however, that turned out to cause problems with backlight to appear on multiple systems with symptoms indicating that i915 was unable to control the backlight on those systems as expected. For this reason, revert commit 8c5bd7ad, but leave the function acpi_video_backlight_quirks() introduced by it, because another commit on top of it uses that function. References: https://lkml.org/lkml/2013/7/21/119 References: https://lkml.org/lkml/2013/7/22/261 References: https://lkml.org/lkml/2013/7/23/429 References: https://lkml.org/lkml/2013/7/23/459 References: https://lkml.org/lkml/2013/7/23/81 References: https://lkml.org/lkml/2013/7/24/27Reported-and-tested-by: NJames Hogan <james@albanarts.com> Reported-and-tested-by: NKamal Mostafa <kamal@canonical.com> Reported-and-tested-by: NJörg Otte <jrg.otte@gmail.com> Reported-and-tested-by: NSteven Newbury <steve@snewbury.org.uk> Reported-by: NMartin Steigerwald <Martin@lichtvoll.de> Reported-by: NKalle Valo <kvalo@adurom.com> Tested-by: NJoerg Platte <jplatte@naasa.net> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 18 7月, 2013 1 次提交
-
-
由 Rafael J. Wysocki 提交于
According to Matthew Garrett, "Windows 8 leaves backlight control up to individual graphics drivers rather than making ACPI calls itself. There's plenty of evidence to suggest that the Intel driver for Windows [8] doesn't use the ACPI interface, including the fact that it's broken on a bunch of machines when the OS claims to support Windows 8. The simplest thing to do appears to be to disable the ACPI backlight interface on these systems". There's a problem with that approach, however, because simply avoiding to register the ACPI backlight interface if the firmware calls _OSI for Windows 8 may not work in the following situations: (1) The ACPI backlight interface actually works on the given system and the i915 driver is not loaded (e.g. another graphics driver is used). (2) The ACPI backlight interface doesn't work on the given system, but there is a vendor platform driver that will register its own, equally broken, backlight interface if not prevented from doing so by the ACPI subsystem. Therefore we need to allow the ACPI backlight interface to be registered until the i915 driver is loaded which then will unregister it if the firmware has called _OSI for Windows 8 (or will register the ACPI video driver without backlight support if not already present). For this reason, introduce an alternative function for registering ACPI video, acpi_video_register_with_quirks(), that will check whether or not the ACPI video driver has already been registered and whether or not the backlight Windows 8 quirk has to be applied. If the quirk has to be applied, it will block the ACPI backlight support and either unregister the backlight interface if the ACPI video driver has already been registered, or register the ACPI video driver without the backlight interface otherwise. Make the i915 driver use acpi_video_register_with_quirks() instead of acpi_video_register() in i915_driver_load(). This change is based on earlier patches from Matthew Garrett, Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's. References: https://bugzilla.kernel.org/show_bug.cgi?id=51231Tested-by: NAaron Lu <aaron.lu@intel.com> Tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com> Tested-by: NYves-Alexis Perez <corsac@debian.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NAaron Lu <aaron.lu@intel.com> Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>
-
- 19 6月, 2013 1 次提交
-
-
由 Toshi Kani 提交于
CONFIG_ACPI_HOTPLUG_MEMORY has been changed to bool (y/n), and its module option is no longer valid. So, stop using CONFIG_ACPI_HOTPLUG_MEMORY_MODULE. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 17 4月, 2013 1 次提交
-
-
由 Myron Stowe 提交于
Both sub-drivers of the "PCI Root Bridge ("pci_bridge")" driver, "acpiphp" and "pci_slot", have been converted to hook directly into the PCI core. With the conversions there are no remaining usages of the 'struct acpi_pci_driver' list based infrastructure. This patch removes it. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Reviewed-by: NYinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
-
- 25 3月, 2013 1 次提交
-
-
由 Toshi Kani 提交于
This patch updates the internal operations of acpi_device_set_id() to setup acpi_device_pnp without using acpi_device. There is no functional change to acpi_device_set_id() in this patch. acpi_pnp_type is added to acpi_device_pnp, so that PNPID type is self-contained within acpi_device_pnp. acpi_add_id(), acpi_bay_match(), acpi_dock_match(), acpi_ibm_smbus_match() and acpi_is_video_device() are changed to take acpi_handle as an argument, instead of acpi_device. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 03 3月, 2013 1 次提交
-
-
由 Yinghai Lu 提交于
Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d19552 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a9 ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d19552 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e ("page_alloc: bootmem limit with movablecore_map") 42f47e27 ("page_alloc: make movablemem_map have higher priority") 6981ec31 ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e ("page_alloc: add movable_memmap kernel parameter") 4d59a751 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: NTim Gardner <tim.gardner@canonical.com> Reported-by: NDon Morris <don.morris@hp.com> Bisected-by: NDon Morris <don.morris@hp.com> Tested-by: NDon Morris <don.morris@hp.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 2月, 2013 1 次提交
-
-
由 Tang Chen 提交于
On linux, the pages used by kernel could not be migrated. As a result, if a memory range is used by kernel, it cannot be hot-removed. So if we want to hot-remove memory, we should prevent kernel from using it. The way now used to prevent this is specify a memory range by movablemem_map boot option and set it as ZONE_MOVABLE. But when the system is booting, memblock will allocate memory, and reserve the memory for kernel. And before we parse SRAT, and know the node memory ranges, memblock is working. And it may allocate memory in ranges to be set as ZONE_MOVABLE. This memory can be used by kernel, and never be freed. So, let's parse SRAT before memblock is called first. And it is early enough. The first call of memblock_find_in_range_node() is in: setup_arch() |-->setup_real_mode() so, this patch add a function early_parse_srat() to parse SRAT, and call it before setup_real_mode() is called. NOTE: 1) early_parse_srat() is called before numa_init(), and has initialized numa_meminfo. So DO NOT clear numa_nodes_parsed in numa_init() and DO NOT zero numa_meminfo in numa_init(), otherwise we will lose memory numa info. 2) I don't know why using count of memory affinities parsed from SRAT as a return value in original acpi_numa_init(). So I add a static variable srat_mem_cnt to remember this count and use it as the return value of the new acpi_numa_init() [mhocko@suse.cz: parse SRAT before memblock is ready fix] Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NWen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2013 1 次提交
-
-
由 Toshi Kani 提交于
config ACPI_CONTAINER has been changed to bool (y/n), and its module option is no longer valid. So, remove the use of CONFIG_ACPI_CONTAINER_MODULE. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 1月, 2013 1 次提交
-
-
由 Rafael J. Wysocki 提交于
CONFIG_PM_SLEEP may be set even if CONFIG_ACPI_SLEEP is unset, although that is unusual. For this reason, make the headers of functions built for both CONFIG_ACPI and CONFIG_PM_SLEEP set simultaneously depend on that combination of Kconfig options instead of CONFIG_ACPI_SLEEP. This fixes a build problem reported by Randy Dunlap. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 11 1月, 2013 1 次提交
-
-
由 Lv Zheng 提交于
This is a cosmetic patch only. Comparison of the resulting binary showed only line number differences. This patch does not affect the generation of the Linux binary. This patch decreases 44 lines of 20121114 divergence.diff. There are naming conflicts between Linux and ACPICA on table handlers. This patch cleans up this conflicts to reduce the source code diff between Linux and ACPICA. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 03 1月, 2013 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Currently, the ACPI wakeup capability of PCI devices is set up in two different places, partially in acpi_pci_bind() where runtime wakeup is initialized and partially in platform_pci_wakeup_init(), where system wakeup is initialized. The cleanup is only done in acpi_pci_unbind() and it only covers runtime wakeup. Use the new .setup() and .cleanup() callbacks in struct acpi_bus_type to consolidate that code and do the setup and the cleanup each in one place. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NToshi Kani <toshi.kani@hp.com>
-
- 05 12月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
The header of acpi_dev_pm_detach() in include/linux/acpi.h has an incorrect return type, which should be void. Fix that. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 26 11月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Make it possible to ask the routines used for adding/removing devices to/from the general ACPI PM domain, acpi_dev_pm_attach() and acpi_dev_pm_detach(), respectively, to change the power states of devices so that they are put into the full-power state automatically by acpi_dev_pm_attach() and into the lowest-power state available automatically by acpi_dev_pm_detach(). Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com> Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
-
- 22 11月, 2012 1 次提交
-
-
由 Toshi Kani 提交于
This patch introduces acpi_handle_<level>(), where <level> is a kernel message level such as err/warn/info, to support improved logging messages for ACPI, esp. hot-plug operations. acpi_handle_<level>() appends "ACPI" prefix and ACPI object path to the messages. This improves diagnosis of hotplug operations since an error message in a log file identifies an object that caused an issue. This interface acquires the global namespace mutex to obtain an object path. In interrupt context, it shows the object path as <n/a>. acpi_handle_<level>() takes acpi_handle as an argument, which is passed to ACPI hotplug notify handlers from the ACPICA. Therefore, it is always available unlike other kernel objects, such as device. For example: acpi_handle_err(handle, "Device don't exist, dropping EJECT\n"); logs an error message like this at KERN_ERR. ACPI: \_SB_.SCK4.CPU4: Device don't exist, dropping EJECT ACPI hot-plug drivers can use acpi_handle_<level>() when they need to identify a target ACPI object path in their messages, such as error cases. The usage model is similar to dev_<level>(). acpi_handle_<level>() can be used when a device is not created or is invalid during hot-plug operations. ACPI object path is also consistent on the platform, unlike device name that gets incremented over hotplug operations. ACPI drivers should use dev_<level>() when a device object is valid. Device name provides more user friendly information, and avoids acquiring the global ACPI namespace mutex. ACPI drivers also continue to use pr_<level>() when they do not need to specify device information, such as boot-up messages. Note: ACPI_[WARNING|INFO|ERROR]() are intended for the ACPICA and are not associated with the kernel message level. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Tested-by: NVijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-