- 08 9月, 2005 3 次提交
-
-
由 Richard Purdie 提交于
Add some power management code to the corgi keyboard driver so that only one power event gets reported within any reasonable time frame and the driver doesn't enter an infinte loop due to key repeat. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Fix a couple of compile errors in the corgi keyboard driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 1 次提交
-
-
由 Ralf Baechle 提交于
Extend the compat mode kludgeology in envdev to cover MIPS as well. Or why we should need something like is_compat_task() ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 8月, 2005 1 次提交
-
-
由 Alexander Nyberg 提交于
Need to use list_for_entry_safe(), as we're removing items during the traversal. list_for_each_entry() uses the first ptr also as an iterator, if you kfree() it slab takes it, might poison it and then you try to use it to iterate to the next object in list. Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 7月, 2005 2 次提交
-
-
由 Sergey Vlasov 提交于
Synaptics driver used child->type to select either 3-byte or 4-byte packet size for the pass-through port; this gives wrong results for the newer protocols. Change the check to use child->pktsize instead. Signed-off-by: NSergey Vlasov <vsu@altlinux.ru> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
When changing key mappings we need to make sure that the new keycode value can be stored in dev->keycodesize bytes. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 7月, 2005 2 次提交
-
-
由 Dmitry Torokhov 提交于
Currently i8042_command() negates data coming from the AUX port of keyboard controller; this is not a very reliable indicator. Change i8042_command() to fail if response to I8042_CMD_AUX_LOOP is not coming from AUX channel and get rid of negation. Based on patch by Vojtech Pavlik. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
There are wheel mice that respond to Logitech probes and report that they have only 2 buttons (such as e-Aser mouse) and this stops the wheel from being used as a middle button. Change the driver to always report BTN_MIDDLE capability if a wheel is present. Also, never reset BTN_RIGHT capability in logips2pp code - there are no Logitech mice that have only one button and if some other mice happen to respond to Logitech's query we could do the wrong thing. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 14 7月, 2005 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 7月, 2005 9 次提交
-
-
由 Michael Prokop 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Tobias Klauser 提交于
Replace the MSECS() macro with the jiffies_to_msecs() function provided in jiffies.h Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Peter Osterlund 提交于
The condition in alps_init() was also inverted and the driver was enabling tapping mode only if it was already enabled. Signed-off-by: NPeter Osterlund <petero2@telia.com> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 David Moore 提交于
The driver would not reset pass-through mode when performing resume of a DualPoint touchpad causing it to stop working until next reboot. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Simon Horman 提交于
Toshiba Dynabooks require the same workaround as Satellites - Synaptics report rate should be lowered to 40pps (from 80), otherwise KBC starts losing keypresses. Signed-off-by: NSimon Horman <horms@valinux.co.jp> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Neil Brown 提交于
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
serio port in sysfs. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 02 7月, 2005 1 次提交
-
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 30 6月, 2005 6 次提交
-
-
由 Ingo Molnar 提交于
Introduce proper declarations for i8253_lock and i8259A_lock. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
set noone should attempt to change them. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
simplify hotplug scripts. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
wakeups in force feedback code. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 28 6月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
git did actually warn me about the fact that I hadn't actually done an "update-cache" on these two files, but the warning was at the bottom of a list of all the files that _did_ change in the merge, so I never noticed. My bad.
-
- 26 6月, 2005 2 次提交
-
-
由 Christoph Lameter 提交于
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: NChristoph Lameter <christoph@lameter.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not all) in comments. This patch changes these synchronize_kernel() calls (and comments) to synchronize_rcu() or synchronize_sched() as follows: - arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to handle races with machine-check exceptions (synchronize_rcu() would not cut it given RCU implementations intended for hardcore realtime use. - drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to handle races with i8042_interrupt() interrupt handler. Again, synchronize_rcu() would not cut it given RCU implementations intended for hardcore realtime use. - include/*/kdebug.h comments: change to synchronize_sched() to handle races with NMIs. As before, synchronize_rcu() would not cut it... - include/linux/list.h comment: change to synchronize_rcu(), since this comment is for list_del_rcu(). - security/keys/key.c unregister_key_type(): change to synchronize_rcu(), since this is interacting with RCU read side. - security/keys/process_keys.c install_session_keyring(): change to synchronize_rcu(), since this is interacting with RCU read side. Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Alexey Dobriyan 提交于
tty_register_ldisc(N_FOO, NULL) => tty_unregister_ldisc(N_FOO) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 1 次提交
-
-
由 Ingo Molnar 提交于
This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 6月, 2005 2 次提交
-
-
由 Yani Ioannou 提交于
[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 gregkh@suse.de 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 6月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
It looks like logic for enabling hardware tapping in ALPS driver was inverted and we enable it only if it was already enabled by BIOS or firmware. I have a confirmation from one user that the patch below fixes the problem for him and it might be beneficial if we could get it into 2.6.12. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 6月, 2005 1 次提交
-
-
由 Vojtech Pavlik 提交于
This patch disables the scroll feature on AT keyboards by default, because it causes the numbers of mouse devices to shift, breaking user setups. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 6月, 2005 5 次提交
-
-
由 Dmitry Torokhov 提交于
to allow easy switching at run-time. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
given number of bytes from device. Change ps2_command to allow using 0 as command ID and actually pass it to the device instead of working as a drain. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
operations do not iterfere with each other. Also make sure that serio core takes serio->drv_sem not only for connect/disconnect but for reconnect too. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
event. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-