Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 02 3月, 2016 1 次提交
  3. 17 2月, 2016 1 次提交
  5. 11 2月, 2016 1 次提交
  7. 15 12月, 2015 1 次提交
    • H
      net: add validation for the socket syscall protocol argument · 79462ad0
      由 Hannes Frederic Sowa 提交于 
      郭永刚 reported that one could simply crash the kernel as root by
using a simple program:

	int socket_fd;
	struct sockaddr_in addr;
	addr.sin_port = 0;
	addr.sin_addr.s_addr = INADDR_ANY;
	addr.sin_family = 10;

	socket_fd = socket(10,3,0x40000000);
	connect(socket_fd , &addr,16);

AF_INET, AF_INET6 sockets actually only support 8-bit protocol
identifiers. inet_sock's skc_protocol field thus is sized accordingly,
thus larger protocol identifiers simply cut off the higher bits and
store a zero in the protocol fields.

This could lead to e.g. NULL function pointer because as a result of
the cut off inet_num is zero and we call down to inet_autobind, which
is NULL for raw sockets.

kernel: Call Trace:
kernel:  [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70
kernel:  [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80
kernel:  [<ffffffff81645069>] SYSC_connect+0xd9/0x110
kernel:  [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80
kernel:  [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200
kernel:  [<ffffffff81645e0e>] SyS_connect+0xe/0x10
kernel:  [<ffffffff81779515>] tracesys_phase2+0x84/0x89

I found no particular commit which introduced this problem.

CVE: CVE-2015-8543
Cc: Cong Wang <cwang@twopensource.com>
Reported-by: N郭永刚 <guoyonggang@360.cn>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      79462ad0
  9. 30 9月, 2015 2 次提交
  11. 18 9月, 2015 1 次提交
  13. 02 9月, 2015 1 次提交
  15. 01 9月, 2015 1 次提交
  17. 31 8月, 2015 2 次提交
  19. 18 8月, 2015 1 次提交
  21. 14 8月, 2015 1 次提交
    • D
      net: Fix up inet_addr_type checks · 30bbaa19
      由 David Ahern 提交于 
      Currently inet_addr_type and inet_dev_addr_type expect local addresses
to be in the local table. With the VRF device local routes for devices
associated with a VRF will be in the table associated with the VRF.
Provide an alternate inet_addr lookup to use a specific table rather
than defaulting to the local table.

inet_addr_type_dev_table keeps the same semantics as inet_addr_type but
if the passed in device is enslaved to a VRF then the table for that VRF
is used for the lookup.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      30bbaa19
  23. 23 7月, 2015 1 次提交
  25. 23 6月, 2015 1 次提交
    • C
      tcp: Do not call tcp_fastopen_reset_cipher from interrupt context · dfea2aa6
      由 Christoph Paasch 提交于 
      tcp_fastopen_reset_cipher really cannot be called from interrupt
context. It allocates the tcp_fastopen_context with GFP_KERNEL and
calls crypto_alloc_cipher, which allocates all kind of stuff with
GFP_KERNEL.

Thus, we might sleep when the key-generation is triggered by an
incoming TFO cookie-request which would then happen in interrupt-
context, as shown by enabling CONFIG_DEBUG_ATOMIC_SLEEP:

[   36.001813] BUG: sleeping function called from invalid context at mm/slub.c:1266
[   36.003624] in_atomic(): 1, irqs_disabled(): 0, pid: 1016, name: packetdrill
[   36.004859] CPU: 1 PID: 1016 Comm: packetdrill Not tainted 4.1.0-rc7 #14
[   36.006085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[   36.008250]  00000000000004f2 ffff88007f8838a8 ffffffff8171d53a ffff880075a084a8
[   36.009630]  ffff880075a08000 ffff88007f8838c8 ffffffff810967d3 ffff88007f883928
[   36.011076]  0000000000000000 ffff88007f8838f8 ffffffff81096892 ffff88007f89be00
[   36.012494] Call Trace:
[   36.012953]  <IRQ>  [<ffffffff8171d53a>] dump_stack+0x4f/0x6d
[   36.014085]  [<ffffffff810967d3>] ___might_sleep+0x103/0x170
[   36.015117]  [<ffffffff81096892>] __might_sleep+0x52/0x90
[   36.016117]  [<ffffffff8118e887>] kmem_cache_alloc_trace+0x47/0x190
[   36.017266]  [<ffffffff81680d82>] ? tcp_fastopen_reset_cipher+0x42/0x130
[   36.018485]  [<ffffffff81680d82>] tcp_fastopen_reset_cipher+0x42/0x130
[   36.019679]  [<ffffffff81680f01>] tcp_fastopen_init_key_once+0x61/0x70
[   36.020884]  [<ffffffff81680f2c>] __tcp_fastopen_cookie_gen+0x1c/0x60
[   36.022058]  [<ffffffff816814ff>] tcp_try_fastopen+0x58f/0x730
[   36.023118]  [<ffffffff81671788>] tcp_conn_request+0x3e8/0x7b0
[   36.024185]  [<ffffffff810e3872>] ? __module_text_address+0x12/0x60
[   36.025327]  [<ffffffff8167b2e1>] tcp_v4_conn_request+0x51/0x60
[   36.026410]  [<ffffffff816727e0>] tcp_rcv_state_process+0x190/0xda0
[   36.027556]  [<ffffffff81661f97>] ? __inet_lookup_established+0x47/0x170
[   36.028784]  [<ffffffff8167c2ad>] tcp_v4_do_rcv+0x16d/0x3d0
[   36.029832]  [<ffffffff812e6806>] ? security_sock_rcv_skb+0x16/0x20
[   36.030936]  [<ffffffff8167cc8a>] tcp_v4_rcv+0x77a/0x7b0
[   36.031875]  [<ffffffff816af8c3>] ? iptable_filter_hook+0x33/0x70
[   36.032953]  [<ffffffff81657d22>] ip_local_deliver_finish+0x92/0x1f0
[   36.034065]  [<ffffffff81657f1a>] ip_local_deliver+0x9a/0xb0
[   36.035069]  [<ffffffff81657c90>] ? ip_rcv+0x3d0/0x3d0
[   36.035963]  [<ffffffff81657569>] ip_rcv_finish+0x119/0x330
[   36.036950]  [<ffffffff81657ba7>] ip_rcv+0x2e7/0x3d0
[   36.037847]  [<ffffffff81610652>] __netif_receive_skb_core+0x552/0x930
[   36.038994]  [<ffffffff81610a57>] __netif_receive_skb+0x27/0x70
[   36.040033]  [<ffffffff81610b72>] process_backlog+0xd2/0x1f0
[   36.041025]  [<ffffffff81611482>] net_rx_action+0x122/0x310
[   36.042007]  [<ffffffff81076743>] __do_softirq+0x103/0x2f0
[   36.042978]  [<ffffffff81723e3c>] do_softirq_own_stack+0x1c/0x30

This patch moves the call to tcp_fastopen_init_key_once to the places
where a listener socket creates its TFO-state, which always happens in
user-context (either from the setsockopt, or implicitly during the
listen()-call)

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Fixes: 222e83d2 ("tcp: switch tcp_fastopen key generation to net_get_random_once")
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      dfea2aa6
  27. 07 6月, 2015 1 次提交
    • E
      inet: add IP_BIND_ADDRESS_NO_PORT to overcome bind(0) limitations · 90c337da
      由 Eric Dumazet 提交于 
      When an application needs to force a source IP on an active TCP socket
it has to use bind(IP, port=x).

As most applications do not want to deal with already used ports, x is
often set to 0, meaning the kernel is in charge to find an available
port.
But kernel does not know yet if this socket is going to be a listener or
be connected.
It has very limited choices (no full knowledge of final 4-tuple for a
connect())

With limited ephemeral port range (about 32K ports), it is very easy to
fill the space.

This patch adds a new SOL_IP socket option, asking kernel to ignore
the 0 port provided by application in bind(IP, port=0) and only
remember the given IP address.

The port will be automatically chosen at connect() time, in a way
that allows sharing a source port as long as the 4-tuples are unique.

This new feature is available for both IPv4 and IPv6 (Thanks Neal)

Tested:

Wrote a test program and checked its behavior on IPv4 and IPv6.

strace(1) shows sequences of bind(IP=127.0.0.2, port=0) followed by
connect().
Also getsockname() show that the port is still 0 right after bind()
but properly allocated after connect().

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 5
setsockopt(5, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0
connect(5, {sa_family=AF_INET, sin_port=htons(53174), sin_addr=inet_addr("127.0.0.3")}, 16) = 0
getsockname(5, {sa_family=AF_INET, sin_port=htons(38050), sin_addr=inet_addr("127.0.0.2")}, [16]) = 0

IPv6 test :

socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = 7
setsockopt(7, SOL_IP, IP_BIND_ADDRESS_NO_PORT, [1], 4) = 0
bind(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0
connect(7, {sa_family=AF_INET6, sin6_port=htons(57300), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = 0
getsockname(7, {sa_family=AF_INET6, sin6_port=htons(60964), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, [28]) = 0

I was able to bind()/connect() a million concurrent IPv4 sockets,
instead of ~32000 before patch.

lpaa23:~# ulimit -n 1000010
lpaa23:~# ./bind --connect --num-flows=1000000 &
1000000 sockets

lpaa23:~# grep TCP /proc/net/sockstat
TCP: inuse 2000063 orphan 0 tw 47 alloc 2000157 mem 66

Check that a given source port is indeed used by many different
connections :

lpaa23:~# ss -t src :40000 | head -10
State      Recv-Q Send-Q   Local Address:Port          Peer Address:Port
ESTAB      0      0           127.0.0.2:40000         127.0.202.33:44983
ESTAB      0      0           127.0.0.2:40000         127.2.27.240:44983
ESTAB      0      0           127.0.0.2:40000           127.2.98.5:44983
ESTAB      0      0           127.0.0.2:40000        127.0.124.196:44983
ESTAB      0      0           127.0.0.2:40000         127.2.139.38:44983
ESTAB      0      0           127.0.0.2:40000          127.1.59.80:44983
ESTAB      0      0           127.0.0.2:40000          127.3.6.228:44983
ESTAB      0      0           127.0.0.2:40000          127.0.38.53:44983
ESTAB      0      0           127.0.0.2:40000         127.1.197.10:44983
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      90c337da
  29. 28 5月, 2015 1 次提交
    • E
      tcp/dccp: try to not exhaust ip_local_port_range in connect() · 07f4c900
      由 Eric Dumazet 提交于 
      A long standing problem on busy servers is the tiny available TCP port
range (/proc/sys/net/ipv4/ip_local_port_range) and the default
sequential allocation of source ports in connect() system call.

If a host is having a lot of active TCP sessions, chances are
very high that all ports are in use by at least one flow,
and subsequent bind(0) attempts fail, or have to scan a big portion of
space to find a slot.

In this patch, I changed the starting point in __inet_hash_connect()
so that we try to favor even [1] ports, leaving odd ports for bind()
users.

We still perform a sequential search, so there is no guarantee, but
if connect() targets are very different, end result is we leave
more ports available to bind(), and we spread them all over the range,
lowering time for both connect() and bind() to find a slot.

This strategy only works well if /proc/sys/net/ipv4/ip_local_port_range
is even, ie if start/end values have different parity.

Therefore, default /proc/sys/net/ipv4/ip_local_port_range was changed to
32768 - 60999 (instead of 32768 - 61000)

There is no change on security aspects here, only some poor hashing
schemes could be eventually impacted by this change.

[1] : The odd/even property depends on ip_local_port_range values parity
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      07f4c900
  31. 11 5月, 2015 3 次提交
  33. 04 4月, 2015 2 次提交
  35. 03 3月, 2015 1 次提交
  37. 02 3月, 2015 1 次提交
  39. 09 2月, 2015 1 次提交
    • E
      net: rfs: add hash collision detection · 567e4b79
      由 Eric Dumazet 提交于 
      Receive Flow Steering is a nice solution but suffers from
hash collisions when a mix of connected and unconnected traffic
is received on the host, when flow hash table is populated.

Also, clearing flow in inet_release() makes RFS not very good
for short lived flows, as many packets can follow close().
(FIN , ACK packets, ...)

This patch extends the information stored into global hash table
to not only include cpu number, but upper part of the hash value.

I use a 32bit value, and dynamically split it in two parts.

For host with less than 64 possible cpus, this gives 6 bits for the
cpu number, and 26 (32-6) bits for the upper part of the hash.

Since hash bucket selection use low order bits of the hash, we have
a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big
enough.

If the hash found in flow table does not match, we fallback to RPS (if
it is enabled for the rxqueue).

This means that a packet for an non connected flow can avoid the
IPI through a unrelated/victim CPU.

This also means we no longer have to clear the table at socket
close time, and this helps short lived flows performance.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      567e4b79
  41. 27 11月, 2014 1 次提交
  43. 06 11月, 2014 2 次提交
  45. 21 10月, 2014 1 次提交
    • F
      net: gso: use feature flag argument in all protocol gso handlers · 1e16aa3d
      由 Florian Westphal 提交于 
      skb_gso_segment() has a 'features' argument representing offload features
available to the output path.

A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use
those instead of the provided ones when handing encapsulation/tunnels.

Depending on dev->hw_enc_features of the output device skb_gso_segment() can
then return NULL even when the caller has disabled all GSO feature bits,
as segmentation of inner header thinks device will take care of segmentation.

This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs
that did not fit the remaining token quota as the segmentation does not work
when device supports corresponding hw offload capabilities.

Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1e16aa3d
  47. 02 10月, 2014 1 次提交
  49. 26 9月, 2014 1 次提交
  51. 10 9月, 2014 2 次提交
  53. 17 7月, 2014 1 次提交
  55. 05 6月, 2014 2 次提交
  57. 24 5月, 2014 1 次提交
  59. 15 5月, 2014 1 次提交
  61. 09 5月, 2014 2 次提交