“be523baad2f4f494d08fec3a40737578d47e25e1”上不存在“paddle/fluid/inference/anakin/convert/relu.h”
- 10 6月, 2013 1 次提交
-
-
由 Patrik Jakobsson 提交于
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 15 5月, 2013 1 次提交
-
-
由 Patrik Jakobsson 提交于
Old code assumed framebuffer starts at base of stolen memory. Since the addition of hardware cursors, this might not be true anymore so add the gtt offset to the calculation. Reported-by: NHolger Schurig <holgerschurig@gmail.com> Tested-by: NHolger Schurig <holgerschurig@gmail.com> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
- 03 5月, 2013 2 次提交
-
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 5月, 2013 16 次提交
-
-
由 Alex Deucher 提交于
The code was mis-handling variable sized arrays. Reported-by: NSylvain BERTRAND <sylware@legeek.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
We actually care about the chip family rather than the DCE version although functionally they are the same. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Stupid copy & paste error over all generations. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
This is to allow debugging of userspace program not freeing buffer after, which is basicly a memory leak. This print the list of all gem object along with their size and placement (VRAM,GTT,CPU) and with the pid of the task that created them. agd5f: add warning fix Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Also init the scratch reg to zero on the UVD ring. This fixes UVD on AGP based cards. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
This avoid moving the BO directly after allocating it. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we have a empty power table, bail early and allocate the default power state. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63865Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Reviwed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Dave Airlie 提交于
Port over the mgag200 fix to cirrus as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Port over the mgag200 fix to ast as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 01 5月, 2013 5 次提交
-
-
由 Dave Airlie 提交于
Sometimes that extra semicolon can really be hard to spot. Acked-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Imre Deak 提交于
drm_gem_release should release all handles connected to the drm file and so should also release the prime lookup entries of these handles. So just WARN if this isn't the case. Signed-off-by: NImre Deak <imre.deak@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This just moves the fb sysfs node beside the drm sysfs node which I fixed before. just noticed it in passing. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Imre Deak 提交于
In commit be8a42ae we inroduced a refcount problem, where on the drm_gem_prime_fd_to_handle() error path we'll call dma_buf_put() for self imported dma buffers. Fix this by taking a reference on the dma buffer in the .gem_import hook instead of assuming the caller had taken one. Besides fixing the bug this is also more logical. Signed-off-by: NImre Deak <imre.deak@intel.com> Cc: stable@vger.kernel.org Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Currently we have a problem with this: 1. i915: create gem object 2. i915: export gem object to prime 3. radeon: import gem object 4. close prime fd 5. radeon: unref object 6. i915: unref object i915 has an imported object reference in its file priv, that isn't cleaned up properly until fd close. The reference gets added at step 2, but at step 6 we don't have enough info to clean it up. The solution is to take a reference on the dma-buf when we export it, and drop the reference when the gem handle goes away. So when we export a dma_buf from a gem object, we keep track of it with the handle, we take a reference to the dma_buf. When we close the handle (i.e. userspace is finished with the buffer), we drop the reference to the dma_buf, and it gets collected. This patch isn't meant to fix any other problem or bikesheds, and it doesn't fix any races with other scenarios. v1.1: move export symbol line back up. v2: okay I had to do a bit more, as the first patch showed a leak on one of my tests, that I found using the dma-buf debugfs support, the problem case is exporting a buffer twice with the same handle, we'd add another export handle for it unnecessarily, however we now fail if we try to export the same object with a different gem handle, however I'm not sure if that is a case I want to support, and I've gotten the code to WARN_ON if we hit something like that. v2.1: rebase this patch, write better commit msg. v3: cleanup error handling, track import vs export in linked list, these two patches were separate previously, but seem to work better like this. v4: danvet is correct, this code is no longer useful, since the buffer better exist, so remove it. v5: always take a reference to the dma buf object, import or export. (Imre Deak contributed this originally) v6: square the circle, remove import vs export tracking now that there is no difference Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 30 4月, 2013 7 次提交
-
-
由 Ville Syrjälä 提交于
There is no way to use modes added to the user_modes list. We never look at the contents of said list in the kernel, and the only operations userspace can do are attach and detach. So the only "benefit" of this interface is wasting kernel memory. Fortunately it seems no real user space application ever used these ioctls. So just kill them. Also remove the prototypes for the non-existing drm_mode_addmode_ioctl() and drm_mode_rmmode_ioctl() functions. v2: Use drm_noop instead of completely removing the ioctls Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ville Syrjälä 提交于
drivers/gpu/drm/drm_pci.c:155:5: warning: symbol 'drm_pci_set_busid' was not declared. Should it be static? drivers/gpu/drm/drm_pci.c:197:5: warning: symbol 'drm_pci_set_unique' was not declared. Should it be static? drivers/gpu/drm/drm_pci.c:269:5: warning: symbol 'drm_pci_agp_init' was not declared. Should it be static? drivers/gpu/drm/drm_crtc.c:181:1: warning: symbol 'drm_get_dirty_info_name' was not declared. Should it be static? drivers/gpu/drm/drm_crtc.c:1123:5: warning: symbol 'drm_mode_group_init' was not declared. Should it be static? drivers/gpu/drm/drm_modes.c:918:6: warning: symbol 'drm_mode_validate_clocks' was not declared. Should it be static? Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ville Syrjälä 提交于
We never modify the contents of drm_ioctls, so make it const. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Rientjes 提交于
Fix build error when CONFIG_DEBUG_FS is disabled: drivers/gpu/drm/qxl/qxl_debugfs.c: In function 'qxl_debugfs_init': drivers/gpu/drm/qxl/qxl_debugfs.c:76:2: error: implicit declaration of function 'drm_debugfs_create_files' drivers/gpu/drm/qxl/qxl_debugfs.c: In function 'qxl_debugfs_takedown': drivers/gpu/drm/qxl/qxl_debugfs.c:84:2: error: implicit declaration of function 'drm_debugfs_remove_files' Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
These two variables are set again immediately in 'mgag200_modeset_init' Signed-off-by: NChristopher Harvey <charvey@matrox.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
Signed-off-by: NChristopher Harvey <charvey@matrox.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Christopher Harvey 提交于
Signed-off-by: NChristopher Harvey <charvey@matrox.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 29 4月, 2013 8 次提交
-
-
由 Sean Paul 提交于
This patch disables blending the mixer's layer 0 onto the background (solid color). It doesn't make sense to blend this layer by default, and causes color distortion if the layer is used for arbitrary content. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
Silences the following checkpatch warning: WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
FIMD also requires video mode helper APIs. Without this patch we get the following build error: drivers/gpu/drm/exynos/exynos_drm_fimd.c:895: undefined reference to `of_get_fb_videomode' make: *** [vmlinux] Error 1 Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Inki Dae 提交于
This patch removes the use of dumb flags from driver. As Dave pointed out, the dumb flags are not driver specific so this should be removed from driver. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Seung-Woo Kim 提交于
This patch added exynos-drm-ipp platform device registration to the exynos drm driver. When DT is enabled, platform devices need to be registered within the driver code. This patch fits the requirement of both DT and Non DT based drm drivers. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NDonghwa Lee <dh09.lee@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
The hdmi common device registration function does not need extern definition and for error case and unregister case, exynos_drm_hdmi_pdev should be cleared. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
platform_device_register_simple() never returns NULL, but IS_ERR_OR_NULL macro is used for checking return value in exynos drm driver. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sylwester Nawrocki 提交于
This patch adds OF initialization support for the FIMC driver. The binding documentation can be found at Documentation/devicetree/ bindings/media/samsung-fimc.txt. The syscon regmap interface is used to serialize access to the shared CAMBLK registers from within the V4L2 FIMC-IS and the DRM FIMC drivers. The DRM driver uses this interface for setting up the FIFO data link between FIMD and FIMC IP blocks, while the V4L2 one for setting up a data link between the camera ISP and FIMC for camera capture. The CAMBLK registers are not accessed any more through a statically mapped IO. Synchronized access to these registers is required for simultaneous operation of the camera ISP and the DRM IPP on Exynos4x12. The driver data and driver_ids static data structures are removed since Exynos4 is going to be a dt-only platform and there is currently no board file in mainline that defines platform data for the FIMC IPP, i.e. uses it. Camera input signal polarities are not currently parsed from the device tree. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-