Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.

All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer.  Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.

Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.

While we're at it also add some more comments describing the dinode
structure.

(First sent on October 7th)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

Add a helper to read the AGI header and perform basic verification.
Based on hunks from a larger patch from Dave Chinner.

(First sent on Juli 23rd)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>

When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.

Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.

Credit to Nick Piggin for tripping over the problem.

SGI-PV: 989741
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).

When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.

As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.

SGI-PV: 981668

SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

To make sure we free the security data inodes need to be freed using the
proper VFS helper (which we also need to export for this). We mark these
inodes bad so we can skip the flush path for them.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32398a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

xfs_bulkstat only wants the dinode, offset and buffer from a given inode
number. Instead of using xfs_itobp on a fake inode which is complicated
and currently leads to leaks of the security data just use xfs_inotobp
which is designed to do exactly the kind of lookup xfs_bulkstat wants. The
only thing that's missing in xfs_inotobp is a flags paramter that let's us
pass down XFS_IMAP_BULKSTAT, but that can easily added.

SGI-PV: 987246

SGI-Modid: xfs-linux-melb:xfs-kern:32397a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

When copying lsn's from the log item to the inode or dquot flush lsn, we
currently grab the AIL lock. We do this because the LSN is a 64 bit
quantity and it needs to be read atomically. The lock is used to guarantee
atomicity for 32 bit platforms.

Make the LSN copying a small function, and make the function used
conditional on BITS_PER_LONG so that 64 bit machines don't need to take
the AIL lock in these places.

SGI-PV: 988143

SGI-Modid: xfs-linux-melb:xfs-kern:32349a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.

Version 3 o kill xfs_icount()

Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

structures.

Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace the generic record / key / ptr addressing macros that use cpp
token pasting with simpler macros that do the job for just one given btree
type. The new macros lose the cur argument and thus can be used outside
the core btree code, but also gain an xfs_mount * argument to allow for
checking the CRC flag in the near future. Note that many of these macros
aren't actually used in the kernel code, but only in userspace (mostly in
xfs_repair).

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32295a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.

Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_iflush_all() walks the m_inodes list to find inodes that need
reclaiming. We already have such a list - the m_del_inodes list. Replace
xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up
xfs_finish_reclaim_all() to handle the different flush modes now needed.

Originally based on a patch from Christoph Hellwig.

Version 3 o rediff against new linux-2.6/xfs_sync.c code

Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original

code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not

XFS_IFLUSH_ASYNC, to prevent change of behaviour.

SGI-PV: 988139

SGI-Modid: xfs-linux-melb:xfs-kern:32284a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).

When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.

As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.

SGI-PV: 981668

SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Make the existing bmap btree tracing generic so that it applies to all
btree types.

Some fragments lifted from a patch by Dave Chinner.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31927a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.

A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.

xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.

It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.

For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.

Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32166a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>

If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32165a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NRussell Cattelan <cattelan@thebarn.com>

The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.

Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.

Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct.  These wrappers are macros because the ordering between header
files mitigates against making them inline functions.

linux/cred.h is #included from linux/sched.h.

Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.

In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.

So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31813a
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Sanitize setting up the Linux indode.

Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.

xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

If we allow incore extent tree allocations to recurse into the
filesystem under memory pressure, new delayed allocations through
xfs_iomap_write_delay() can deadlock on themselves if memory
reclaim tries to write back dirty pages from that inode.

It will deadlock in xfs_iomap_write_allocate() trying to take the
ilock we already hold. This can also show up as complex ABBA deadlocks
when multiple threads are triggering memory reclaim when trying to
allocate extents.

The main cause of this is the fact that delayed allocation is not done in
a transaction, so KM_NOFS is not automatically added to the allocations to
prevent this recursion.

Mark all allocations done for the incore inode extent tree as KM_NOFS to
ensure they never recurse back into the filesystem.

Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31726a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace XFS_ITOV() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31724a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace XFS_ITOV_NULL() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31722a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

This function is used to compact the indirect extent list by moving
extents from one page to the previous to fill them up. After we move some
extents to an earlier page we need to shuffle the remaining extents to the
start of the page. The actual bug here is the second argument to memmove()
needs to index past the extents, that were copied to the previous page,
and move the remaining extents. For pages that are already full (ie
ext_avail == 0) the compaction code has no net effect so don't do it.

SGI-PV: 983337

SGI-Modid: xfs-linux-melb:xfs-kern:31332a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

During a forced shutdown a xfs inode can be destroyed before log I/O
involving that inode is complete. We need to wait for the inode to be
unpinned before tearing it down. Version 2 cleans up the code a bit by
relying on xfs_iflush() to do the unpinning and forced shutdown check.

SGI-PV: 981240

SGI-Modid: xfs-linux-melb:xfs-kern:31326a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>

xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.

xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.

Just kill those two and merge them into xfs_setattr.

SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.

This patch removes size argument from all callsites.

SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

We only need to allocate space for the number of inodes in the cluster
when writing back inodes, not every byte in the inode cluster. This
reduces the amount of memory needing to be allocated to 256 bytes instead
of 64k.

SGI-PV: 981949
SGI-Modid: xfs-linux-melb:xfs-kern:31182a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

writeback

If we allow memory reclaim to wait on the pages under writeback in inode
cluster writeback we could deadlock because we are currently holding the
ILOCK on the initial writeback inode which is needed in data I/O
completion to change the file size or do unwritten extent conversion
before the pages are taken out of writeback state.

SGI-PV: 981091
SGI-Modid: xfs-linux-melb:xfs-kern:31015a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

On success, we still need to join the inode to the current transaction in
xfs_itruncate_finish(). Fixes regression from error handling changes.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30845a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>