Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
From Sergei Shtylylov <sshtylyov@ru.mvista.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
Fixes BCSR accesses in the board setup/reset code.  The registers are
actually 16-bit, and their addresses are different between DBAu1550 and
other DBAu1xx0 boards.
    
From Sergei Shtylylov <sshtylyov@ru.mvista.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
The way we were doing things does no longer work on 2.6.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
From Daniel Jacobowitz <dan@debian.org>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
The rdhwr emulation accidentally swallowed the SIGILL from most other
illegal instructions.  Make sure to return -EFAULT by default.
Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
... because they have R4000-style caches.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

    
 o Check if IRQ is disabled or in progress before reenabling interrupts
   in jmr3927_irq_end..
 o s/spinlock_irqsave/spin_lock_irqsave/
 o s/spinlock_irqrestore/spin_unlock_irqrestore/
 o Flush write buffer after setting IRQ mask
 o In 2.6 jmr3927_ioc_interrupt interrupt handlers return irqreturn_t
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Setting irq affinity stops working when MSI is enabled.  With MSI, move_irq
is empty, so we can't change irq affinity.  It appears a typo in Ashok's
original commit for this issue.  X86_64 actually is using move_native_irq.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I recently discovered a bug on PPC which causes the floating point
registers to get corrupted when CONFIG_PREEMPT=y.

The problem occurred while running a multi threaded Java application that
does floating point.  The problem could be reproduced in anywhere from 2 to
6 hours.  With the patch I have included below it ran for over a week
without failure.
Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Tom Rini <trini@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Anne NICOLAS <anne.nicolas@mandriva.com> and Andres Kaaber
<andres.kaaber@rescue.ee> reported their HP laptop didn't reboot smoothly.
Signed-off-by: NThierry Vignaud <tvignaud@mandriva.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the correct pointer to clear the memory of the return values,
to prevent stack corruption in the callers stackframe.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a bug noticed by Paolo Galtieri and fixed for ARCH=ppc in
the previous commit (ppc: fix floating point register corruption).
This fixes the arch/powerpc code by adding preempt_disable/enable,
and also cleans it up a bit by pulling out the code that discards
any lazily-switched CPU register state into a new function, rather
than having that code repeated in three places.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I recently discovered a bug on PPC which causes the floating point
registers to get corrupted when CONFIG_PREEMPT=y.

The problem occurred while running a multi threaded Java application that
does floating point.  The problem could be reproduced in anywhere from 2 to
6 hours.  With the patch I have included below it ran for over a week
without failure.
Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Tom Rini <trini@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Increment the PFN field of the PTE so that the tests
on vm_pfn in mm/memory.c match up.  The TLB ignores these
lower bits for larger page sizes, so it's OK to set things
like this.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

break.b always sets cr.iim to 0 and the current code tries to
get the break_num by decoding instruction. However, their
seems to be a race condition while reading the regs->cr_iip,
as on other cpu the break.b at regs->cr_iip might have been
replaced with the original instruction as a result of
unregister_kprobe() and hence decoding instruction to
obtain break_num will result in wrong value in this case.

Also includes changes to kprobes.c which now has to handle
break number zero.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

A single SGI Altix system can be divided into multiple partitions,
each running their own instance of the Linux kernel.  pfn_valid()
is currently not optimal for any but the first partition, since it
does not compare the pfn with min_low_pfn before calling the more
costly ia64_pfn_valid().
Signed-off-by: NDean Roe <roe@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Both 32-bit and 64-bit use the same inline flush_icache_range definition
now, so both need to export __flush_icache_range, not just 64-bit.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Export symbol needed to allow MOL to run. This was changed to be inline
in past and forgot to be change here.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch is for supporting IDE interface for M3A-2170(Mappi-III) board.
Signed-off-by: NMamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a deadlock problem of the m32r SMP kernel.

In the m32r kernel, sys_tas() system call is provided as a test-and-set
function for userspace, for backward compatibility.

In some multi-threading application program, deadlocks were rarely caused
at sys_tas() funcion.  Such a deadlock was caused due to a collision of
__pthread_lock() and __pthread_unlock() operations.

The "tas" syscall is repeatedly called by pthread_mutex_lock() to get a
lock, while a lock variable's value is not 0.  On the other hand,
pthead_mutex_unlock() sets the lock variable to 0 for unlocking.

In the previous implementation of sys_tas() routine, there was a
possibility that a unlock operation was ignored in the following case:

- Assume a lock variable (*addr) was equal to 1 before sys_tas() execution.
- __pthread_unlock() operation is executed by the other processor
  and the lock variable (*addr) is set to 0, between a read operation
  ("oldval = *addr;") and the following write operation ("*addr = 1;")
  during a execution of sys_tas().

In this case, the following write operation ("*addr = 1;") overwrites the
__pthread_unlock() result, and sys_tas() fails to get a lock in the next
turn and after that.

According to the attatched patch, sys_tas() returns 0 value in the next
turn and deadlocks never happen.
Signed-off-by: NHitoshi Yamamoto <Yamamoto.Hitoshi@ap.MitsubishiElectric.co.jp>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch implements a bunch of small changes to the FRV arch to
make it work again.

It deals with the following problems:

 (1) SEM_DEBUG should be SEMAPHORE_DEBUG.

 (2) The argument list to pcibios_penalize_isa_irq() has changed.

 (3) CONFIG_HIGHMEM can't be used directly in #if as it may not be defined.

 (4) page->private is no longer directly accessible.

 (5) linux/hardirq.h assumes asm/hardirq.h will include linux/irq.h

 (6) The IDE MMIO access functions are given pointers, not integers, and so
     get type casting errors.

 (7) __pa() is passed an explicit u64 type in drivers/char/mem.c, but that
     can't be cast directly to a pointer on a 32-bit platform.

 (8) SEMAPHORE_DEBUG should not be contingent on WAITQUEUE_DEBUG as that no
     longer exists.

 (9) PREEMPT_ACTIVE is too low a value.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here are the Sparc bits.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This replaces the (in my opinion horrible) VM_UNMAPPED logic with very
explicit support for a "remapped page range" aka VM_PFNMAP.  It allows a
VM area to contain an arbitrary range of page table entries that the VM
never touches, and never considers to be normal pages.

Any user of "remap_pfn_range()" automatically gets this new
functionality, and doesn't even have to mark the pages reserved or
indeed mark them any other way.  It just works.  As a side effect, doing
mmap() on /dev/mem works for arbitrary ranges.

Sparc update from David in the next commit.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Richard Purdie

This updates the Zaurus defconfigs. Poodle gets merged into
corgi_defconfig and support for tosa and akita is enabled.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

Add iWMMX Extentions for the pxa27x based Zaurus models and
fix a couple of minor mistakes in the PXA Kconfig file.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We must not call TLB maintainence operations with interrupts disabled,
otherwise we risk a lockup in the SMP IPI code.

This means that consistent_free() can not be called from a context with
IRQs disabled.  In addition, we must not hold the lock in consistent_free
when we call flush_tlb_kernel_range().  However, we must continue to
prevent consistent_alloc() from re-using the memory region until we've
finished tearing down the mapping and dealing with the TLB.

Therefore, leave the vm_region entry in the list, but mark it inactive
before dropping the lock and starting the tear-down process.  After the
mapping has been torn down, re-acquire the lock and remove the entry
from the list.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We don't really need to check whether the machine type is Netwinder
or CATS before setting up the PCI IO mapping for debugging.  This
allows us to eliminate asm/mach-types.h from head.S
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Blah.  The patch [0] I recently sent fixing errors with
in_hugepage_area() and prepare_hugepage_range() for powerpc itself has
an off-by-one bug.  Furthermore, the related functions
touches_hugepage_*_range() and within_hugepage_*_range() are also
buggy.  Some of the bugs, like those addressed in [0] originated with
commit 7d24f0b8 where we tweaked the
semantics of where hugepages are allowed.  Other bugs have been there
essentially forever, and are due to the undefined behaviour of '<<'
with shift counts greater than the type width (LOW_ESID_MASK could
return non-zero for high ranges with the right congruences).

The good news is that I now have a testsuite which should pick up
things like this if they creep in again.

[0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary"
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

With the removal of include/asm-powerpc, we no longer need
arch/powerpc/include/asm for the 64 bit build.  We also do not need
-Iarch/powerpc for the 64 bit build either.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The DBG() call where updated with the appropriate KERN_* symbol.
Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When attempting to hotadd a PCI card with a bridge on it, I saw
the kernel reporting resource collision errors even when there were
really no collisions. The problem is that the code doesn't skip
over "invalid" resources with their resource type flag not set.
Others have reported similar problems at boot time and for
non-bridge PCI card hotplug too, where the code flags a
resource collision for disabled ROMs. This patch fixes both
problems.
Signed-off-by: NRajesh Shah <rajesh.shah@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modified common.c so it's using the appropriate KERN_* in printk() calls.
Signed-off-by: NDaniel Marjamkia <daniel.marjamaki@comhem.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>