- 09 1月, 2015 16 次提交
-
-
由 Nadav Amit 提交于
Currently, if em_call_far fails it returns success instead of the resulting error-code. Fix it. Signed-off-by: NNadav Amit <namit@cs.technion.ac.il> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Nadav Amit 提交于
The KVM emulator does not emulate JMP and CALL that target a call gate or a task gate. This patch does not try to implement these scenario as they are presumably rare; yet it returns X86EMUL_UNHANDLEABLE error in such cases instead of generating an exception. Signed-off-by: NNadav Amit <namit@cs.technion.ac.il> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Nadav Amit 提交于
Since the operand size of fnstcw and fnstsw is updated during the execution, the emulation may cause spurious exceptions as it reads the memory beforehand. Marking these instructions as Mov (since the previous value is ignored) and DstMem16 to simplify the setting of operand size. Signed-off-by: NNadav Amit <namit@cs.technion.ac.il> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Nadav Amit 提交于
Although pop sreg updates RSP according to the operand size, only 2 bytes are read. The current behavior may result in incorrect #GP or #PF exceptions. Signed-off-by: NNadav Amit <namit@cs.technion.ac.il> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This makes the direction of the conditions consistent with code that is already using WARN_ON. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Because ASSERT is just a printk, these would oops right away. The assertion thus hardly adds anything. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The initialization function in mmu.c can always use walk_mmu, which is known to be vcpu->arch.mmu. Only init_kvm_nested_mmu is used to initialize vcpu->arch.nested_mmu. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This is, pedantically, not valid C. It also looks weird. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marcelo Tosatti 提交于
Add tracepoint to wait_lapic_expire. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> [Remind reader if early or late. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marcelo Tosatti 提交于
For the hrtimer which emulates the tscdeadline timer in the guest, add an option to advance expiration, and busy spin on VM-entry waiting for the actual expiration time to elapse. This allows achieving low latencies in cyclictest (or any scenario which requires strict timing regarding timer expiration). Reduces average cyclictest latency from 12us to 8us on Core i5 desktop. Note: this option requires tuning to find the appropriate value for a particular hardware/guest combination. One method is to measure the average delay between apic_timer_fn and VM-entry. Another method is to start with 1000ns, and increase the value in say 500ns increments until avg cyclictest numbers stop decreasing. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marcelo Tosatti 提交于
kvm_x86_ops->test_posted_interrupt() returns true/false depending whether 'vector' is set. Next patch makes use of this interface. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tiejun Chen 提交于
In most cases calling hwapic_isr_update(), we always check if kvm_apic_vid_enabled() == 1, but actually, kvm_apic_vid_enabled() -> kvm_x86_ops->vm_has_apicv() -> vmx_vm_has_apicv() or '0' in svm case -> return enable_apicv && irqchip_in_kernel(kvm) So its a little cost to recall vmx_vm_has_apicv() inside hwapic_isr_update(), here just NULL out hwapic_isr_update() in case of !enable_apicv inside hardware_setup() then make all related stuffs follow this. Note we don't check this under that condition of irqchip_in_kernel() since we should make sure definitely any caller don't work without in-kernel irqchip. Signed-off-by: NTiejun Chen <tiejun.chen@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Nicholas Krause 提交于
Remove FIXME comments about needing fault addresses to be returned. These are propaagated from walk_addr_generic to gva_to_gpa and from there to ops->read_std and ops->write_std. Signed-off-by: NNicholas Krause <xerofoify@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eugene Korenevsky 提交于
When generating #PF VM-exit, check equality: (PFEC & PFEC_MASK) == PFEC_MATCH If there is equality, the 14 bit of exception bitmap is used to take decision about generating #PF VM-exit. If there is inequality, inverted 14 bit is used. Signed-off-by: NEugene Korenevsky <ekorenevsky@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eugene Korenevsky 提交于
This patch improve checks required by Intel Software Developer Manual. - SMM MSRs are not allowed. - microcode MSRs are not allowed. - check x2apic MSRs only when LAPIC is in x2apic mode. - MSR switch areas must be aligned to 16 bytes. - address of first and last byte in MSR switch areas should not set any bits beyond the processor's physical-address width. Also it adds warning messages on failures during MSR switch. These messages are useful for people who debug their VMMs in nVMX. Signed-off-by: NEugene Korenevsky <ekorenevsky@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wincy Van 提交于
Several hypervisors need MSR auto load/restore feature. We read MSRs from VM-entry MSR load area which specified by L1, and load them via kvm_set_msr in the nested entry. When nested exit occurs, we get MSRs via kvm_get_msr, writing them to L1`s MSR store area. After this, we read MSRs from VM-exit MSR load area, and load them via kvm_set_msr. Signed-off-by: NWincy Van <fanwenyi0529@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 06 1月, 2015 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Wire up sys_execveat(). Tested on 32 & 64 bit. - Fix for kdump on LE systems with cpus hot unplugged. - Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this broke other platforms, we'll do a proper fix for 3.20. * tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online" powerpc/kdump: Ignore failure in enabling big endian exception during crash powerpc: Wire up sys_execveat() syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 fixlet from Tony Luck: "Add execveat syscall" * tag 'please-pull-syscall' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable execveat syscall for ia64
-
由 Tony Luck 提交于
See commit 51f39a1f syscalls: implement execveat() system call Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 05 1月, 2015 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML fixes from Richard Weinberger: "Two fixes for UML regressions. Nothing exciting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: x86, um: actually mark system call tables readonly um: Skip futex_atomic_cmpxchg_inatomic() test
-
由 Pavel Machek 提交于
Commit 9fc2105a ("ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo") breaks audio in python, and probably elsewhere, with message FATAL: cannot locate cpu MHz in /proc/cpuinfo I'm not the first one to hit it, see for example https://theredblacktree.wordpress.com/2014/08/10/fatal-cannot-locate-cpu-mhz-in-proccpuinfo/ https://devtalk.nvidia.com/default/topic/765800/workaround-for-fatal-cannot-locate-cpu-mhz-in-proc-cpuinf/?offset=1 Reading original changelog, I have to say "Stop breaking working setups. You know who you are!". Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 1月, 2015 2 次提交
-
-
由 Daniel Borkmann 提交于
Commit a074335a ("x86, um: Mark system call tables readonly") was supposed to mark the sys_call_table in UML as RO by adding the const, but it doesn't have the desired effect as it's nevertheless being placed into the data section since __cacheline_aligned enforces sys_call_table being placed into .data..cacheline_aligned instead. We need to use the ____cacheline_aligned version instead to fix this issue. Before: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size After: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size Fixes: a074335a ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
由 Richard Weinberger 提交于
futex_atomic_cmpxchg_inatomic() does not work on UML because it triggers a copy_from_user() in kernel context. On UML copy_from_user() can only be used if the kernel was called by a real user space process such that UML can use ptrace() to fetch the value. Reported-by: NMiklos Szeredi <miklos@szeredi.hu> Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NRichard Weinberger <richard@nod.at> Tested-by: NDaniel Walter <d.walter@0x90.at>
-
- 03 1月, 2015 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of three fixes: one to correct an abort path thinko causing failures (and a panic) in USB on device misbehaviour, One to fix an out of order issue in the fnic driver and one to match discard expectations to qemu which otherwise cause Linux to behave badly as a guest" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: fix regression in scsi_send_eh_cmnd() fnic: IOMMU Fault occurs when IO and abort IO is out of order sd: tweak discard heuristics to work around QEMU SCSI issue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Nothing too exciting as a new year's start here: most of fixes are for ASoC, a boot crash fix on OMAP for deferred probe, a few driver specific fixes (Intel, dwc, rockchip, rt5677), in addition to typo fixes in kerneldoc comments for PCM" * tag 'sound-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Fix kerneldoc for params_*() functions ASoC: rockchip: i2s: fix maxburst of dma data to 4 ASoC: rockchip: i2s: fix error defination of transmit data level ASoC: Intel: correct the fixed free block allocation ASoC: rt5677: fixed rt5677_dsp_vad_put rt5677_dsp_vad_get panic ASoC: Intel: Fix BYTCR machine driver MODULE_ALIAS ASoC: Intel: Fix BYTCR firmware name ASoC: dwc: Iterate over all channels ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap ASoC: Intel: Add I2C dependency to two new machines ASoC: dapm: Remove snd_soc_of_parse_audio_routing() due to deferred probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull vhost cleanup and virtio bugfix "There's a single change here, fixing a vhost bug where vhost initialization fails due to used ring alignment check being too strict" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: relax used address alignment virtio_ring: document alignment requirements
-
- 01 1月, 2015 4 次提交
-
-
git://git.infradead.org/users/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fix from Paul Moore: "One audit patch to resolve a panic/oops when recording filenames in the audit log, see the mail archive link below. The fix isn't as nice as I would like, as it involves an allocate/copy of the filename, but it solves the problem and the overhead should only affect users who have configured audit rules involving file names. We'll revisit this issue with future kernels in an attempt to make this suck less, but in the meantime I think this fix should go into the next release of v3.19-rcX. [ https://marc.info/?t=141986927600001&r=1&w=2 ]" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: create private file name copies when auditing inodes
-
由 Linus Torvalds 提交于
This reverts commit 9d469d03. It breaks the Chromebook Pixel touchpad (and touchscreen). Reported-by: NDirk Hohndel <dirk@hohndel.org> Bisected-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Nick Dyer <nick.dyer@itdev.co.uk> Cc: Benson Leung <bleung@chromium.org> Cc: Yufeng Shen <miletus@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.rocketboards.org/linux-socfpga-next由 Linus Torvalds 提交于
Pull arch/nios2 fixes from Ley Foon Tan: - fix compilation error when enable CONFIG_PREEMPT - initialize cpuinfo.mmu variable supplied by the device tree * tag 'nios2-fixes-v3.19-rc3' of git://git.rocketboards.org/linux-socfpga-next: nios2: Use preempt_schedule_irq nios2: Initialize cpuinfo.mmu
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "Fix a use-after-free crash in the user-space crypto API" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - fix backlog handling
-
- 31 12月, 2014 9 次提交
-
-
由 Tobias Klauser 提交于
Follow aa0d5326 ("ia64: Use preempt_schedule_irq") and use preempt_schedule_irq instead of enabling/disabling interrupts and messing around with PREEMPT_ACTIVE in the nios2 low-level preemption code ourselves. Also get rid of the now needless re-check for TIF_NEED_RESCHED, preempt_schedule_irq will already take care of rescheduling. This also fixes the following build error when building with CONFIG_PREEMPT: arch/nios2/kernel/built-in.o: In function `need_resched': arch/nios2/kernel/entry.S:374: undefined reference to `PREEMPT_ACTIVE' Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NLey Foon Tan <lftan@altera.com>
-
由 Walter Goossens 提交于
This patch initializes the mmu field of the cpuinfo structure to the value supplied by the devicetree. Signed-off-by: NWalter Goossens <waltergoossens@home.nl> Acked-by: NLey Foon Tan <lftan@altera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "A very small set of fixes for 3.19, as everyone was out. The clocksource patch was something I missed for the merge window after the change that broke arm64 was merged through arm-soc. The other two patches are a fix for an undetected merge problem in mvebu and a defconfig change to make some exynos boards work with the normal multi_v7_defconfig" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Add USB_EHCI_EXYNOS to multi_v7_defconfig ARM: mvebu: Fix pinctrl configuration for Armada 370 DB clocksource: arch_timer: Only use the virtual counter (CNTVCT) on arm64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: - Fix regression with Nokia N900 display - Fix crash on fbdev using freed __initdata logos - Fix fb_deferred_io_fsync() return value. * tag 'fbdev-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: SDI: fix output port_num video/fbdev: fix defio's fsync video/logo: prevent use of logos after they have been freed OMAPDSS: pll: NULL dereference in error handling OMAPDSS: HDMI: remove double initializer entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
-
由 Jiri Kosina 提交于
This reverts commit 24a0aa21. It's causing severe userspace breakage. Namely, all the utilities from wireless-utils which are relying on CONFIG_WEXT (which means tools like 'iwconfig', 'iwlist', etc) are not working anymore. There is a 'iw' utility in newer wireless-tools, which is supposed to be a replacement for all the "deprecated" binaries, but it's far away from being massively adopted. Please see [1] for example of the userspace breakage this is causing. In addition to that, Larry Finger reports [2] that this patch is also causing ipw2200 driver being impossible to build. To me this clearly shows that CONFIG_WEXT is far, far away from being "deprecated enough" to be removed. [1] http://thread.gmane.org/gmane.linux.kernel/1857010 [2] http://thread.gmane.org/gmane.linux.network/343688Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen. 2) Fix receive checksum handling in enic driver, from Govindarajulu Varadarajan. 3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from Herbert Xu. Also, add code to detect drivers that have this mistake in the future. 4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai. 5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP input path,f rom Nicolas Dichtel. 6) Fix MPLS action validation in openvswitch, from Pravin B Shelar. 7) Fix double SKB free in vxlan driver, also from Pravin. 8) When we scrub a packet, which happens when we are switching the context of the packet (namespace, etc.), we should reset the secmark. From Thomas Graf. 9) ->ndo_gso_check() needs to do more than return true/false, it also has to allow the driver to clear netdev feature bits in order for the caller to be able to proceed properly. From Jesse Gross. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) genetlink: A genl_bind() to an out-of-range multicast group should not WARN(). netlink/genetlink: pass network namespace to bind/unbind ne2k-pci: Add pci_disable_device in error handling bonding: change error message to debug message in __bond_release_one() genetlink: pass multicast bind/unbind to families netlink: call unbind when releasing socket netlink: update listeners directly when removing socket genetlink: pass only network namespace to genl_has_listeners() netlink: rename netlink_unbind() to netlink_undo_bind() net: Generalize ndo_gso_check to ndo_features_check net: incorrect use of init_completion fixup neigh: remove next ptr from struct neigh_table net: xilinx: Remove unnecessary temac_property in the driver net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding openvswitch: fix odd_ptr_err.cocci warnings Bluetooth: Fix accepting connections when not using mgmt Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR brcmfmac: Do not crash if platform data is not populated ipw2200: select CFG80211_WEXT ...
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "Fix exec test compile warnings" * tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/exec: Use %zu to format size_t
-
由 Alan Stern 提交于
Commit ac61d195 (scsi: set correct completion code in scsi_send_eh_cmnd()) introduced a bug. It changed the stored return value from a queuecommand call, but it didn't take into account that the return value was used again later on. This patch fixes the bug by changing the later usage. There is a big comment in the middle of scsi_send_eh_cmnd() which does a good job of explaining how the routine works. But it mentions a "rtn = FAILURE" value that doesn't exist in the code. This patch adjusts the code to match the comment (I assume the comment is right and the code is wrong). This fixes Bugzilla #88341. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: NАндрей Аладьев <aladjev.andrew@gmail.com> Tested-by: NАндрей Аладьев <aladjev.andrew@gmail.com> Fixes: ac61d195Acked-by: NHannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-