Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 04 6月, 2011 1 次提交
  3. 02 6月, 2011 1 次提交
  5. 30 4月, 2011 5 次提交
    • J
      iwlagn: prefer BSS context · ebf8dc80
      由 Johannes Berg 提交于 
      If an interface type changes from a type that is
only supported on the PAN context (e.g. P2P GO)
to a type that is supported on the BSS context,
and the BSS context is not in use, then we need
to use the BSS context instead of changing the
device type within the context. To achieve this,
refuse the type change, which causes a down/up
cycle that will allocate the BSS context for the
interface.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
      ebf8dc80
    • J
      iwlagn: improve RXON checking · c914ac26
      由 Johannes Berg 提交于 
      The current RXON checking doesn't verify that
the channel is valid (or at least non-zero),
so add that. Also, add a WARN() so we get a
stacktrace, and capture a bitmask of errors
in order to capture all necessary information
in the warning itself (in case the previous
messages are snipped off.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
      c914ac26
    • D
      iwlagn: mod param cleanup · 9d143e9a
      由 Don Fry 提交于 
      All agn devices use the same module parameter structure.  Delete the
indirection and access the structure diretly.
Signed-off-by: NDon Fry <donald.h.fry@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
      9d143e9a
    • J
      iwlagn: avoid hangs when restarting device · 9d39e5ba
      由 Johannes Berg 提交于 
      If a device error happens while the uCode is
being loaded or initialised, we will attempt
to restart the device (which will likely fail
again, but that's not the issue here). During
this new restart, we turn off the device, but
as the uCode failed to initialise it already
is turned off. As a consequence, grabbing NIC
access will fail and cause excessive messages
and hangs.

To fix this issue, introduce a new status bit
and only attempt to reprogram the device when
it isn't already disabled.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
      9d39e5ba
    • S
      iwlagn: fix tx power initialization · 75d80cad
      由 Stanislaw Gruszka 提交于 
      Since

commit f844a709
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Jan 28 16:47:44 2011 +0100

    iwlwifi: do not set tx power when channel is changing

we set device tx power during initialization to priv->tx_power_next,
which itself is initialized to minimum power. That changed
default behaviour of driver. Previously we initialized device to
transmit at maximum available power by default. Patch change again
to previous behaviour and cleanup tx power initialization.

Fortunately this is not critical fix, as mac80211 layer setup
tx power lately to 14dB, hence device does not operate at minimal
transmit power all the time.
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      75d80cad
  7. 23 4月, 2011 1 次提交
  9. 19 4月, 2011 1 次提交
  11. 08 4月, 2011 8 次提交
  13. 31 3月, 2011 1 次提交
  15. 05 3月, 2011 1 次提交
  17. 22 2月, 2011 4 次提交
  19. 01 2月, 2011 1 次提交
  21. 29 1月, 2011 1 次提交
  23. 22 1月, 2011 3 次提交
  25. 03 1月, 2011 1 次提交
  27. 14 12月, 2010 2 次提交
  29. 07 12月, 2010 1 次提交
  31. 16 11月, 2010 8 次提交