* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  e1000: fix virtualization bug
  bonding: fix alb mode locking regression
  Bluetooth: Fix issue with sysfs handling for connections
  usbnet: CDC EEM support (v5)
  tcp: Fix tcp_prequeue() to get correct rto_min value
  ehea: fix invalid pointer access
  ne2k-pci: Do not register device until initialized.
  Subject: [PATCH] br2684: restore net_dev initialization
  net: Only store high 16 bits of kernel generated filter priorities
  virtio_net: Fix function name typo
  virtio_net: Cleanup command queue scatterlist usage
  bonding: correct the cleanup in bond_create()
  virtio: add missing include to virtio_net.h
  smsc95xx: add support for LAN9512 and LAN9514
  smsc95xx: configure LED outputs
  netconsole: take care of NETDEV_UNREGISTER event
  xt_socket: checks for the state of nf_conntrack
  bonding: bond_slave_info_query() fix
  cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’
  netfilter: use likely() in xt_info_rdlock_bh()
  ...

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix setting of oprofile cpu type
  powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries
  powerpc adjust oprofile_cpu_type version 3

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: Fix send_sigiotask hook

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  net/9p: handle correctly interrupted 9P requests
  net/9p: return error when p9_client_stat fails
  net/9p: set correct stat size when sending Twstat messages

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mvsdio: fix CONFIG_PM=y build
  mmci: fix crash with debug enabled
  sdhci: catch ADMA errors
  mmc: increase power up delay
  sdhci-pci: bad error handling in probe function
  mmc_block: be prepared for oversized requests

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Remove BROKEN from mpc5200 kconfig
  ASoC: TWL4030: Fix gain control for earpiece amplifier
  ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
  ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers
  ALSA: indigo-express: add missing 64KHz flags
  ASoC: Set the MPC5200 i2s driver to BROKEN status.
  ASoC: Fix logic in WM8350 master clocking check

a recent fix to e1000 (commit 15b2bee2) caused KVM/QEMU/VMware based
virtualized e1000 interfaces to begin failing when resetting.

This is because the driver in a virtual environment doesn't
get to run instructions *AT ALL* when an interrupt is asserted.
The interrupt code runs immediately and this recent bug fix
allows an interrupt to be possible when the interrupt handler
will reject it (due to the new code), when being called from
any path in the driver that holds the E1000_RESETTING flag.

the driver should use the __E1000_DOWN flag instead of the
__E1000_RESETTING flag to prevent interrupt execution
while reconfiguring the hardware.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix locking issue in alb MAC address management; removed
incorrect locking and replaced with correct locking.  This bug was
introduced in commit 059fe7a5
("bonding: Convert locks to _bh, rework alb locking for new locking")

	Bug reported by Paul Smith <paul@mad-scientist.net>, who also
tested the fix.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CRED patch incorrectly converted the SELinux send_sigiotask hook to
use the current task SID rather than the target task SID in its
permission check, yielding the wrong permission check.  This fixes the
hook function.  Detected by the ltp selinux testsuite and confirmed to
correct the test failure.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

By using the same test as is used for /proc/pid/maps and /proc/pid/smaps,
only allow processes that can ptrace() a given process to see information
that might be used to bypass address space layout randomization (ASLR).
These include eip, esp, wchan, and start_stack in /proc/pid/stat as well
as the non-symbolic output from /proc/pid/wchan.

ASLR can be bypassed by sampling eip as shown by the proof-of-concept
code at http://code.google.com/p/fuzzyaslr/ As part of a presentation
(http://www.cr0.org/paper/to-jt-linux-alsr-leak.pdf) esp and wchan were
also noted as possibly usable information leaks as well.  The
start_stack address also leaks potentially useful information.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: NJake Edge <jake@lwn.net>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to a semantic changes in flush_workqueue() the current approach of
synchronizing the sysfs handling for connections doesn't work anymore. The
whole approach is actually fully broken and based on assumptions that are
no longer valid.

With the introduction of Simple Pairing support, the creation of low-level
ACL links got changed. This change invalidates the reason why in the past
two independent work queues have been used for adding/removing sysfs
devices. The adding of the actual sysfs device is now postponed until the
host controller successfully assigns an unique handle to that link. So
the real synchronization happens inside the controller and not the host.

The only left-over problem is that some internals of the sysfs device
handling are not initialized ahead of time. This leaves potential access
to invalid data and can cause various NULL pointer dereferences. To fix
this a new function makes sure that all sysfs details are initialized
when an connection attempt is made. The actual sysfs device is only
registered when the connection has been successfully established. To
avoid a race condition with the registration, the check if a device is
registered has been moved into the removal work.

As an extra protection two flush_work() calls are left in place to
make sure a previous add/del work has been completed first.

Based on a report by Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Tested-by: NJustin P. Mattock <justinmattock@gmail.com>
Tested-by: NRoger Quadros <ext-roger.quadros@nokia.com>
Tested-by: NMarc Pignat <marc.pignat@hevs.ch>

This introduces a CDC Ethernet Emulation Model (EEM) host side
driver to support USB EEM devices.

EEM is different from the Ethernet Control Model (ECM) currently
supported by the "CDC Ethernet" driver.  One key difference is
that it doesn't require of USB interface alternate settings to
manage interface state; some maldesigned hardware can't handle
that part of USB.  It also avoids a separate USB interface for
control and status updates.

[ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet
checks, improve fault handling, EEM conformance updates, cleanup ]
Signed-off-by: NOmar Laazimani <omar.oberthur@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of
the actual value might be tuned. The following patches fix this and make
tcp_prequeue get the actual value returns from tcp_rto_min().
Signed-off-by: NSatoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes an invalid pointer access in case the receive queue
holds no pointer to the next skb when the queue is empty.
Signed-off-by: NHannes Hering <hering2@de.ibm.com>
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* fix/misc:
  ALSA: indigo-express: add missing 64KHz flags

* fix/asoc:
  ASoC: Remove BROKEN from mpc5200 kconfig
  ASoC: TWL4030: Fix gain control for earpiece amplifier
  ASoC: Set the MPC5200 i2s driver to BROKEN status.
  ASoC: Fix logic in WM8350 master clocking check

* fix/pcm-jiffies-check:
  ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
  ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers

The regression was fixed by commit
3e5b5016, so no need to mark this
driver as BROKEN.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix usage of obsolete parameters and functions in the driver's PM
callbacks.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Acked-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

If MMC debugging is enabled, the mmci driver oopses because the DBG
macro uses host->mmc before it is set.  Set it earlier.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

We forgot to add the ADMA error bit to the list of data interrupts.
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

The TI controller on Toshiba Tecra M5 needs more time to power up or
the cards will init incorrectly or not at all.
Signed-off-by: NJosé M. Fernández <josemariafg@gmail.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

The goto unmap is too early, we haven't allocated host or done the
request_region().

Found by smatch (http://repo.or.cz/w/smatch.git).

[ Second error path fix by Pierre Ossman ]
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

The block layer does not support very low sector count restrictions
so we need to be prepared to handle bigger requests than we can send
directly to the controller.

Problem found by Manuel Lauss.
Signed-off-by: NPierre Ossman <pierre@ossman.eu>

Follow up to Nick Piggin's patches to ensure that nfs_vm_page_mkwrite
returns with the page lock held, and sets the VM_FAULT_LOCKED flag.

See http://bugzilla.kernel.org/show_bug.cgi?id=12913Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix getbmap vs mmap deadlock
  xfs: a couple getbmap cleanups
  xfs: add more checks to superblock validation
  xfs_file_last_byte() needs to acquire ilock

The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
  configfs: Fix Trivial Warning in fs/configfs/symlink.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-cd: fix REQ_QUIET tests in cdrom_decode_status

Fix up trivial conflicts in include/linux/blkdev.h

* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data
  [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created
  [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch
  [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail
  davinci: DM644x: NAND: update partitioning
  davinci: update DM644x support in preparation for more SoCs
  davinci: DM644x: rename board file
  davinci: update pin-multiplexing support
  davinci: serial: generalize for more SoCs
  davinci: DM355 IRQ Definitions
  davinci: DM646x: add interrupt number and priorities
  davinci: PSC: Clear bits in MDCTL reg before setting new bits
  davinci: gpio bugfixes
  davinci: add EDMA driver
  davinci: timers: use clk_get_rate()
  [ARM] pxa/littleton: add missing da9034 touchscreen support
  [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders
  [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
  [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC
  [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol
  ...

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86, mce: fix boot logging logic
  x86, mce: make polling timer interval per CPU

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (53 commits)
  [SCSI] libosd: OSD2r05: on-the-wire changes for latest OSD2 revision 5.
  [SCSI] libosd: OSD2r05: OSD_CRYPTO_KEYID_SIZE will grow 20 => 32 bytes
  [SCSI] libosd: OSD2r05: Prepare for rev5 attribute list changes
  [SCSI] libosd: fix potential ERR_PTR dereference in osd_initiator.c
  [SCSI] mpt2sas : bump driver version to 01.100.02.00
  [SCSI] mpt2sas: fix hotplug event processing
  [SCSI] mpt2sas : release diagnotic buffers prior host reset
  [SCSI] mpt2sas : Broadcast Primative AEN bug fix
  [SCSI] mpt2sas : Identify Dell series-7 adapters at driver load time
  [SCSI] mpt2sas : driver name needs to be in the MPT2IOCINFO ioctl
  [SCSI] mpt2sas : running out of message frames
  [SCSI] mpt2sas : fix oops when firmware sends large sense buffer size
  [SCSI] mpt2sas : the sanity check in base_interrupt needs to be on dword boundary
  [SCSI] mpt2sas : unique ioctl magic number
  [SCSI] fix sign extension with 1.5TB usb-storage LBD=y
  [SCSI] ipr: Fix sleeping function called with interrupts disabled
  [SCSI] fcoe: fip: add multicast filter to receive FIP advertisements.
  [SCSI] libfc: Fix compilation warnings with allmodconfig
  [SCSI] fcoe: fix spelling typos and bad comments
  [SCSI] fcoe: don't export functions that are internal to fcoe
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: document the multi-touch (MT) protocol
  Input: add detailed multi-touch finger data report protocol
  Input: allow certain EV_ABS events to bypass all filtering
  Input: bcm5974 - add documentation for the driver
  Input: bcm5974 - augment debug information
  Input: bcm5974 - Add support for the Macbook 5 (Unibody)
  Input: bcm5974 - add quad-finger tapping
  Input: bcm5974 - prepare for a new trackpad header type
  Input: appletouch - fix DMA to/from stack buffer
  Input: wacom - fix TabletPC touch bug
  Input: lifebook - add DMI entry for Fujitsu B-2130
  Input: ALPS - add signature for Toshiba Satellite Pro M10
  Input: elantech - make sure touchpad is really in absolute mode
  Input: elantech - provide a workaround for jumpy cursor on firmware 2.34
  Input: ucb1400 - use disable_irq_nosync() in irq handler
  Input: tsc2007 - use disable_irq_nosync() in irq handler
  Input: sa1111ps2 - use disable_irq_nosync() in irq handlers
  Input: omap-keypad - use disable_irq_nosync() in irq handler

See http://bugzilla.kernel.org/show_bug.cgi?id=13034

If the port gets into a TIME_WAIT state, then we cannot reconnect without
binding to a new port.
Tested-by: NPetr Vandrovec <petr@vandrovec.name>
Tested-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild, modpost: Check the section flags, to catch missing "ax"/"aw"
  kbuild: fix comment in modpost.c
  kbuild: fix scripts/setlocalversion with git
  kbuild: fix Module.markers permission error under cygwin
  docs: also clean index.html
  kbuild: remove a tag file before it is regenerated
  kbuild: "make prepare" should be "make modules_prepare"
  kbuild: clean Module.markers and modules.order for out-of-tree modules
  avr32: drop unused CLEAN_FILES

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Change repository in MAINTAINERS.
  ocfs2: Fix a missing credit when deleting from indexed directories.
  ocfs2/trivial: Remove unused variable in ocfs2_rename.
  ocfs2: Add missing iput() during error handling in ocfs2_dentry_attach_lock()
  ocfs2: Fix some printk() warnings.
  ocfs2: Fix 2 warning during ocfs2 make.
  ocfs2: Reserve 1 more cluster in expanding_inline_dir for indexed dir.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix oops in hid_check_keys_pressed()
  HID: fix possible deadlock in usbhid_close()
  HID: Fix the support for apple mini aluminium keyboard
  HID: Add support for the G25 force feedback wheel in native mode
  HID: hidraw -- fix missing unlocks in unlocked_ioctl

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: use __stringify() macro in assembler.h
  m32r: build fix for __stringify macro