This fixes breakage introduced by the following commit:

  commit 6d2d82627f4f1e96a33664ace494fa363e0495cb
  Author: Liu Yu-B13201 <Yu.Liu@freescale.com>
  Date:   Tue Jul 3 05:48:56 2012 +0000

    PPC: Don't use hardcoded opcode for ePAPR hcall invocation

when a driver that uses ePAPR hypercalls is built as a module.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is printed once for every RMA or HPT region that get
preallocated.  If one preallocates hundreds of such regions
(in order to run hundreds of KVM guests), that gets rather
painful, so make it a bit quieter.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Our mapping code assumes that TLB0 entries are always mapped. However, after
calling clear_tlb_refs() this is no longer the case.

Map them dynamically if we find an entry unmapped in TLB0.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We're already counting remote TLB flushes in a variable, but don't export
it to user space yet. Do so, so we know what's going on.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Semantically, the "SYNC" cap means that we have mmu notifiers available.
Express this in our #ifdef'ery around the feature, so that we can be sure
we don't miss out on ppc targets when they get their implementation.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We want to have tracing information on guest exits for booke as well
as book3s. Since most information is identical, use a common trace point.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[varun: 64-bit changes]
Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

And add a new flag definition in kvm_ppc_pvinfo to indicate
whether the host supports the EV_IDLE hcall.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[stuart.yoder@freescale.com: cleanup,fixes for conditions allowing idle]
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
[agraf: fix typo]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[stuart: factored this out from idle hcall support in host patch]
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Recent changes (KVM: make processes waiting on vcpu mutex killable)
now requires to check the return value of vcpu_load. This triggered
a warning in s390 specific kvm code. Turns out that we can actually
remove the put/load, since schedule will do the right thing via
the preempt notifiers.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If we reset a vcpu on INIT, we so far overwrote dr7 as provided by
KVM_SET_GUEST_DEBUG, and we also cleared switch_db_regs unconditionally.

Fix this by saving the dr7 used for guest debugging and calculating the
effective register value as well as switch_db_regs on any potential
change. This will change to focus of the set_guest_debug vendor op to
update_dp_bp_intercept.

Found while trying to stop on start_secondary.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

To emulate level triggered interrupts, add a resample option to
KVM_IRQFD.  When specified, a new resamplefd is provided that notifies
the user when the irqchip has been resampled by the VM.  This may, for
instance, indicate an EOI.  Also in this mode, posting of an interrupt
through an irqfd only asserts the interrupt.  On resampling, the
interrupt is automatically de-asserted prior to user notification.
This enables level triggered interrupts to be posted and re-enabled
from vfio with no userspace intervention.

All resampling irqfds can make use of a single irq source ID, so we
reserve a new one for this interface.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Most interrupt are delivered to only one vcpu. Use pre-build tables to
find interrupt destination instead of looping through all vcpus. In case
of logical mode loop only through vcpus in a logical cluster irq is sent
to.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

* queue:
  KVM: MMU: Eliminate pointless temporary 'ac'
  KVM: MMU: Avoid access/dirty update loop if all is well
  KVM: MMU: Eliminate eperm temporary
  KVM: MMU: Optimize is_last_gpte()
  KVM: MMU: Simplify walk_addr_generic() loop
  KVM: MMU: Optimize pte permission checks
  KVM: MMU: Update accessed and dirty bits after guest pagetable walk
  KVM: MMU: Move gpte_access() out of paging_tmpl.h
  KVM: MMU: Optimize gpte_access() slightly
  KVM: MMU: Push clean gpte write protection out of gpte_access()
  KVM: clarify kvmclock documentation
  KVM: make processes waiting on vcpu mutex killable
  KVM: SVM: Make use of asm.h
  KVM: VMX: Make use of asm.h
  KVM: VMX: Make lto-friendly
Signed-off-by: NAvi Kivity <avi@redhat.com>

'ac' essentially reconstructs the 'access' variable we already
have, except for the PFERR_PRESENT_MASK and PFERR_RSVD_MASK.  As
these are not used by callees, just use 'access' directly.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Keep track of accessed/dirty bits; if they are all set, do not
enter the accessed/dirty update loop.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

'eperm' is no longer used in the walker loop, so we can eliminate it.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of branchy code depending on level, gpte.ps, and mmu configuration,
prepare everything in a bitmap during mode changes and look it up during
runtime.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The page table walk is coded as an infinite loop, with a special
case on the last pte.

Code it as an ordinary loop with a termination condition on the last
pte (large page or walk length exhausted), and put the last pte handling
code after the loop where it belongs.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

walk_addr_generic() permission checks are a maze of branchy code, which is
performed four times per lookup.  It depends on the type of access, efer.nxe,
cr0.wp, cr4.smep, and in the near future, cr4.smap.

Optimize this away by precalculating all variants and storing them in a
bitmap.  The bitmap is recalculated when rarely-changing variables change
(cr0, cr4) and is indexed by the often-changing variables (page fault error
code, pte access permissions).

The permission check is moved to the end of the loop, otherwise an SMEP
fault could be reported as a false positive, when PDE.U=1 but PTE.U=0.
Noted by Xiao Guangrong.

The result is short, branch-free code.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

While unspecified, the behaviour of Intel processors is to first
perform the page table walk, then, if the walk was successful, to
atomically update the accessed and dirty bits of walked paging elements.

While we are not required to follow this exactly, doing so will allow us
to perform the access permissions check after the walk is complete, rather
than after each walk step.

(the tricky case is SMEP: a zero in any pte's U bit makes the referenced
page a supervisor page, so we can't fault on a one bit during the walk
itself).
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We no longer rely on paging_tmpl.h defines; so we can move the function
to mmu.c.

Rely on zero extension to 64 bits to get the correct nx behaviour.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If nx is disabled, then is gpte[63] is set we will hit a reserved
bit set fault before checking permissions; so we can ignore the
setting of efer.nxe.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

gpte_access() computes the access permissions of a guest pte and also
write-protects clean gptes.  This is wrong when we are servicing a
write fault (since we'll be setting the dirty bit momentarily) but
correct when instantiating a speculative spte, or when servicing a
read fault (since we'll want to trap a following write in order to
set the dirty bit).

It doesn't seem to hurt in practice, but in order to make the code
readable, push the write protection out of gpte_access() and into
a new protect_clean_gpte() which is called explicitly when needed.
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

- mention that system time needs to be added to wallclock time
- positive tsc_shift means left shift, not right
- mention additional 32bit right shift
Signed-off-by: NStefan Fritsch <sf@sfritsch.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

vcpu mutex can be held for unlimited time so
taking it with mutex_lock on an ioctl is wrong:
one process could be passed a vcpu fd and
call this ioctl on the vcpu used by another process,
it will then be unkillable until the owner exits.

Call mutex_lock_killable instead and return status.
Note: mutex_lock_interruptible would be even nicer,
but I am not sure all users are prepared to handle EINTR
from these ioctls. They might misinterpret it as an error.

Cleanup paths expect a vcpu that can't be used by
any userspace so this will always succeed - catch bugs
by calling BUG_ON.

Catch callers that don't check return state by adding
__must_check.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use macros for bitness-insensitive register names, instead of
rolling our own.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use macros for bitness-insensitive register names, instead of
rolling our own.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

LTO (link-time optimization) doesn't like local labels to be referred to
from a different function, since the two functions may be built in separate
compilation units.  Use an external variable instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

find_highest_vector() and count_vectors():
 - Instead of using magic values, define and use proper macros.

find_highest_vector():
 - Remove likely() which is there only for historical reasons and not
   doing correct branch predictions anymore.  Using such heuristics
   to optimize this function is not worth it now.  Let CPUs predict
   things instead.

 - Stop checking word[0] separately.  This was only needed for doing
   likely() optimization.

 - Use for loop, not while, to iterate over the register array to make
   the code clearer.

Note that we actually confirmed that the likely() did wrong predictions
by inserting debug code.
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Checking the return of kvm_mmu_get_page is unnecessary since it is
guaranteed by memory cache
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM lapic timer and tsc deadline timer based on hrtimer,
setting a leftmost node to rb tree and then do hrtimer reprogram.
If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram
do nothing and then make kvm lapic timer and tsc deadline timer fail.
Signed-off-by: NLiu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

interrupt_bitmap is KVM_NR_INTERRUPTS bits in size,
so just use that instead of hard-coded constants
and math.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Optimize "rep ins" by allowing emulator to write back more than one
datum at a time. Introduce new operand type OP_MEM_STR which tells
writeback() that dst contains pointer to an array that should be written
back as opposite to just one data element.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>