iput() already checks for the inode being NULL, thus it's unnecessary to
check before calling.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NChris Mason <clm@fb.com>

fs/btrfs/scrub.c: In function 'get_raid56_logic_offset':
fs/btrfs/scrub.c:2269: warning: comparison of distinct pointer types lacks a cast
fs/btrfs/scrub.c:2269: warning: right shift count >= width of type
fs/btrfs/scrub.c:2269: warning: passing argument 1 of '__div64_32' from incompatible pointer type

Since @rot is an int type, we should not use do_div(), fix it.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Steps to reproduce:
 # mkfs.btrfs -f /dev/sda[8-11] -m raid5 -d raid5
 # mount /dev/sda8 /mnt
 # btrfs scrub start -BR /mnt
 # echo $? <--unverified errors make return value be 3

This is because we don't setup right mapping between physical
and logical address for raid56, which makes checksum mismatch.
But we will find everthing is fine later when rechecking using
btrfs_map_block().

This patch fixed the problem by settuping right mappings and
we only verify data stripes' checksums.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

Since the "_struct" suffix is mainly used for distinguish the differnt
btrfs_work between the original and the newly created one,
there is no need using the suffix since all btrfs_workers are changed
into btrfs_workqueue.

Also this patch fixed some codes whose code style is changed due to the
too long "_struct" suffix.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

Replace the fs_info->scrub_* with the newly created
btrfs_workqueue.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

check if @scrubs_running=@scrubs_paused condition inside wait_event()
is not an atomic operation which means we may inc/dec @scrub_running/
paused at any time. Let's wake up @scrub_pause_wait as much as we can
to let commit transaction blocked less.

An example below:

Thread1				Thread2
|->scrub_blocked_if_needed()	|->scrub_pending_trans_workers_inc
  |->increase @scrub_paused
                                       |->increase @scrub_running
  |->wake up scrub_pause_wait list
                                       |->scrub blocked
                                       |->increase @scrub_paused

Thread3 is commiting transaction which is blocked at btrfs_scrub_pause().
So after Thread2 increase @scrub_paused, we meet the condition
@scrub_paused=@scrub_running, but transaction will be still blocked until
another calling to wake up @scrub_pause_wait.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

commit cb7ab021 cause a following deadlock found by
xfstests,btrfs/011:

Thread1 is commiting transaction which is blocked at
btrfs_scrub_pause().

Thread2 is calling btrfs_file_aio_write() which has held
inode's @i_mutex and commit transaction(blocked because
Thread1 is committing transaction).

Thread3 is copy_nocow_page worker which will also try to
hold inode @i_mutex, so thread3 will wait Thread1 finished.

Thread4 is waiting pending workers finished which will wait
Thread3 finished. So the problem is like this:

Thread1--->Thread4--->Thread3--->Thread2---->Thread1

Deadlock happens! we fix it by letting Thread1 go firstly,
which means we won't block transaction commit while we are
waiting pending workers finished.
Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

There is a bug that using btrfs_previous_item() to search metadata extent item.
This is because in btrfs_previous_item(), we need type match, however, since
skinny metada was introduced by josef, we may mix this two types. So just
use btrfs_previous_item() is not working right.

To keep btrfs_previous_item() like normal tree search, i introduce another
function btrfs_previous_extent_item().
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Check if we support skinny metadata firstly and fix to use
right type to search.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Convert all applicable cases of printk and pr_* to the btrfs_* macros.

Fix all uses of the BTRFS prefix.
Signed-off-by: NFrank Holton <fholton@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Just wrap same code into one function scrub_blocked_if_needed().

This make a change that we will move waiting (@workers_pending = 0)
before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
we must take carefully to not deadlock here.

Thread 1			Thread 2
				|->btrfs_commit_transaction()
					|->set trans type(COMMIT_DOING)
					|->btrfs_scrub_paused()(blocked)
|->join_transaction(blocked)

Move btrfs_scrub_paused() before setting trans type which means we can
still join a transaction when commiting_transaction is blocked.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Suggested-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We came a race condition when scrubbing superblocks, the story is:

In commiting transaction, we will update @last_trans_commited after
writting superblocks, if scrubber start after writting superblocks
and before updating @last_trans_commited, generation mismatch happens!

We fix this by checking @scrub_pause_req, and we won't start a srubber
until commiting transaction is finished.(after btrfs_scrub_continue()
finished.)
Reported-by: NSebastian Ochmann <ochmann@informatik.uni-bonn.de>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Signed-off-by: NValentina Giusti <valentina.giusti@microon.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

It was being open coded in a few places.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6

It was being open coded in a few places.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NNeilBrown <neilb@suse.de>

Currently if we discover an error when scrubbing in ro mode we a)
blindly increment the uncorrectable_errors counter, and b) spam the
dmesg with the 'unable to fixup (regular) error at ...' message, even
though a) we haven't tried to determine if the error is correctable or
not, and b) we haven't tried to fixup anything.  Fix this.

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We only allocate scrub workers if we pass all the necessary
checks, for example, there are no operation in progress.

Besides, move mutex lock protection outside of scrub_workers_get()
/scrub_workers_put().
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.

However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Replace progresses strictly from lower to higher offsets, and the
progress is tracked in chunks, by storing the physical offset of the
dev_extent which is being copied in the cursor_left field of
btrfs_dev_replace_item.  When we are done copying the chunk,
left_cursor is updated to point one byte past the dev_extent, so that
on resume we can skip the dev_extents that have already been copied.

There is a major bug (which goes all the way back to the inception of
dev-replace in 3.8) in the way left_cursor is bumped: the bump is done
unconditionally, without any regard to the scrub_chunk return value.
On suspend (and also on any kind of error) scrub_chunk returns early,
i.e. without completing the copy.  This leads to us skipping the chunk
that hasn't been fully copied yet when resuming.

Fix this by doing the cursor_left update only if scrub_chunk ret is 0.
(On suspend scrub_chunk returns with -ECANCELED, so this fix covers
both suspend and error cases.)

Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Various people have hit a deadlock when running btrfs/011.  This is because when
replacing nocow extents we will take the i_mutex to make sure nobody messes with
the file while we are replacing the extent.  The problem is we are already
holding a transaction open, which is a locking inversion, so instead we need to
save these inodes we find and then process them outside of the transaction.

Further we can't just lock the inode and assume we are good to go.  We need to
lock the extent range and then read back the extent cache for the inode to make
sure the extent really still points at the physical block we want.  If it
doesn't we don't have to copy it.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

btrfs_read_fs_root_no_name() already checks if btrfs_root_refs()
is zero and returns ENOENT in this case. There is no need to do
it again in three more places.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

mirror_num is always "int", hence don't cast it to "unsigned long long" and
format it as a 64-bit number.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

PAGE_SIZE is "unsigned long" everywhere, so there's no need to cast it to
"unsigned long long" and format it as a 64-bit number.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.

Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Miao Xie reported the following issue:

The filesystem was corrupted after we did a device replace.

Steps to reproduce:
 # mkfs.btrfs -f -m single -d raid10 <device0>..<device3>
 # mount <device0> <mnt>
 # btrfs replace start -rfB 1 <device4> <mnt>
 # umount <mnt>
 # btrfsck <device4>

The reason for the issue is that we changed the write offset by mistake,
introduced by commit 625f1c8d.

We read the data from the source device at first, and then write the
data into the corresponding place of the new device. In order to
implement the "-r" option, the source location is remapped using
btrfs_map_block(). The read takes place on the mapped location, and
the write needs to take place on the unmapped location. Currently
the write is using the mapped location, and this commit changes it
back by undoing the change to the write address that the aforementioned
commit added by mistake.
Reported-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

- It makes no sense that we deal with a inode in the dead tree.
- fix the race between dio and page copy by waiting the dio completion
- avoid the page copy vs truncate/punch hole
- check if the page is in the page cache or not
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

- It make no sense that we continue to do something after the error
  happened, just go back with this patch.
- remove some check of copy_nocow_pages_for_inode(), such as page check
  after write, inode check in the end of the function, because we are
  sure they exist.
- remove the unnecessary goto in the return value check of the write
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We get oops while running btrfs replace start test,
------------[ cut here ]------------
kernel BUG at mm/filemap.c:608!
[SNIP]
Call Trace:
  [<ffffffffa04b36c7>] copy_nocow_pages_for_inode+0x217/0x3f0 [btrfs]
  [<ffffffffa04b34b0>] ? scrub_print_warning_inode+0x230/0x230 [btrfs]
  [<ffffffffa04b34b0>] ? scrub_print_warning_inode+0x230/0x230 [btrfs]
  [<ffffffffa04bb8ce>] iterate_extent_inodes+0x1ae/0x300 [btrfs]
  [<ffffffffa04bbab2>] iterate_inodes_from_logical+0x92/0xb0 [btrfs]
  [<ffffffffa04b34b0>] ? scrub_print_warning_inode+0x230/0x230 [btrfs]
  [<ffffffffa04b3b07>] copy_nocow_pages_worker+0x97/0x150 [btrfs]
  [<ffffffffa048eed4>] worker_loop+0x134/0x540 [btrfs]
  [<ffffffff816274ea>] ? __schedule+0x3ca/0x7f0
  [<ffffffffa048eda0>] ? btrfs_queue_worker+0x300/0x300 [btrfs]
  [<ffffffff8106f2f0>] kthread+0xc0/0xd0
  [<ffffffff8106f230>] ? flush_kthread_worker+0x80/0x80
  [<ffffffff8163181c>] ret_from_fork+0x7c/0xb0
  [<ffffffff8106f230>] ? flush_kthread_worker+0x80/0x80
[SNIP]
 RIP  [<ffffffff8111f4c5>] unlock_page+0x35/0x40
  RSP <ffff88010316bb98>
 ---[ end trace 421e79ad0dd72c7d ]---

it is because we forgot to lock the page again after we read data to
the page. Fix it.
Signed-off-by: NLin Feng <linfeng@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Using the structure btrfs_sector_sum to keep the checksum value is
unnecessary, because the extents that btrfs_sector_sum points to are
continuous, we can find out the expected checksums by btrfs_ordered_sum's
bytenr and the offset, so we can remove btrfs_sector_sum's bytenr. After
removing bytenr, there is only one member in the structure, so it makes
no sense to keep the structure, just remove it, and use a u32 array to
store the checksum value.

By this change, we don't use the while loop to get the checksums one by
one. Now, we can get several checksum value at one time, it improved the
performance by ~74% on my SSD (31MB/s -> 54MB/s).

test command:
 # dd if=/dev/zero of=/mnt/btrfs/file0 bs=1M count=1024 oflag=sync
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A user reported scrub taking up an unreasonable amount of ram as it ran.  This
is because we lookup the csums for the extent we're scrubbing but don't free it
up until after we're done with the scrub, which means we can take up a whole lot
of ram.  This patch fixes this by dropping the csums once we're done with the
extent we've scrubbed.  The user reported this to fix their problem.  Thanks,
Reported-and-tested-by: NRemco Hosman <remco@hosman.xs4all.nl>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Btrfs has been pointer tagging bi_private and using bi_bdev
to store the stripe index and mirror number of failed IOs.

As bios bubble back up through the call chain, we use these
to decide if and how to retry our IOs.  They are also used
to count IO failures on a per device basis.

Recently a bio tracepoint was added lead to crashes because
we were abusing bi_bdev.

This commit adds a btrfs bioset, and creates explicit fields
for the mirror number and stripe index.  The plan is to
extend this structure for all of the fields currently in
struct btrfs_bio, which will mean one less kmalloc in
our IO path.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Reported-by: NTejun Heo <tj@kernel.org>

1) Right now scrub_stripe() is looping in some unnecessary cases:
* when the found extent item's objectid has been out of the dev extent's range
  but we haven't finish scanning all the range within the dev extent
* when all the items has been processed but we haven't finish scanning all the
  range within the dev extent

In both cases, we can just finish the loop to save costs.

2) Besides, when the found extent item's length is larger than the stripe
len(64k), we don't have to release the path and search again as it'll get at the
same key used in the last loop, we can instead increase the logical cursor in
place till all space of the extent is scanned.

3) And we use 0 as the key's offset to search btree, then get to previous item
to find a smaller item, and again have to move to the next one to get the right
item.  Setting offset=-1 and previous_item() is the correct way.

4) As we won't find any checksum at offset unless this 'offset' is in a data
extent, we can just find checksum when we're really going to scrub an extent.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.

removed functions:

btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()

btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.

ulist.c functions are left, another patch will take care of those.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We currently store the first key of the tree block inside the reference for the
tree block in the extent tree.  This takes up quite a bit of space.  Make a new
key type for metadata which holds the level as the offset and completely removes
storing the btrfs_tree_block_info inside the extent ref.  This reduces the size
from 51 bytes to 33 bytes per extent reference for each tree block.  In practice
this results in a 30-35% decrease in the size of our extent tree, which means we
COW less and can keep more of the extent tree in memory which makes our heavy
metadata operations go much faster.  This is not an automatic format change, you
must enable it at mkfs time or with btrfstune.  This patch deals with having
metadata stored as either the old format or the new format so it is easy to
convert.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Argument 'root' is no more used in btrfs_csum_data().
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A user reported a panic where we were panicing somewhere in
tree_backref_for_extent from scrub_print_warning.  He only captured the trace
but looking at scrub_print_warning we drop the path right before we mess with
the extent buffer to print out a bunch of stuff, which isn't right.  So fix this
by dropping the path after we use the eb if we need to.  Thanks,

Cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

There is no lock to protect fs_info->fs_state, it will introduce
some problems, such as the value may be covered by the other task
when several tasks modify it. For example:
	Task0 - CPU0		Task1 - CPU1
	mov %fs_state rax
	or $0x1 rax
				mov %fs_state rax
				or $0x2 rax
	mov rax %fs_state
				mov rax %fs_state
The expected value is 3, but in fact, it is 2.

Though this problem doesn't happen now (because there is only one
flag currently), the code is error prone, if we add other flags,
the above problem will happen to a certainty.

Now we use bit operation for it to fix the above problem.
In this way, we can make the code more robust and be easy to
add new flags.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

While running snapshot testscript created by Mitch and David,
the race between autodefrag and snapshot deletion can lead to
corruption of dead_root list so that we can get crash on
btrfs_clean_old_snapshots().

And besides autodefrag, scrub also does the same thing, ie. read
root first and get inode.

Here is the story(take autodefrag as an example):
(1) when we delete a snapshot or subvolume, it will set its root's
refs to zero and do a iput() on its own inode, and if this inode happens
to be the only active in-meory one in root's inode rbtree, it will add
itself to the global dead_roots list for later cleanup.

(2) after (1), the autodefrag thread may read another inode for defrag
and the inode is just in the deleted snapshot/subvolume, but all of these
are without checking if the root is still valid(refs > 0).  So the end up
result is adding the deleted snapshot/subvolume's root to the global
dead_roots list AGAIN.

Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu.

So all we need to do is to take the lock to protect 'read root and get inode',
since we synchronize to wait for the rcu grace period before adding something
to the global dead_roots list.
Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>