- 16 4月, 2013 1 次提交
-
-
由 Alexandre Courbot 提交于
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 20 3月, 2013 1 次提交
-
-
由 Alexandre Courbot 提交于
SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected through CONFIG_GPIOLIB, yet some compilation units depended on CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it is more accurate and prepares us for the future removal of CONFIG_GENERIC_GPIO. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 28 2月, 2013 2 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 2月, 2013 1 次提交
-
-
由 Wen Congyang 提交于
For removing memory, we need to remove page tables. But it depends on architecture. So the patch introduce arch_remove_memory() for removing page table. Now it only calls __remove_pages(). Note: __remove_pages() for some archtecuture is not implemented (I don't know how to implement it for s390). Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 2月, 2013 1 次提交
-
-
由 Len Brown 提交于
SH idle code could use some simplification. This patch enables that by guaranteeing that "sh_idle" is local, and thus architecture specific. Signed-off-by: NLen Brown <len.brown@intel.com> Cc: linux-sh@vger.kernel.org
-
- 14 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
-
- 05 2月, 2013 1 次提交
-
-
由 James Hogan 提交于
The IRQ_PER_CPU Kconfig symbol was removed in the following commit: Commit 6a58fb3b ("genirq: Remove CONFIG_IRQ_PER_CPU") merged in v2.6.39-rc1. But IRQ_PER_CPU wasn't removed from any of the architecture Kconfig files where it was defined or selected. It's completely unused so remove the remaining references. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: <uclinux-dist-devel@blackfin.uclinux.org> Cc: <linux-mips@linux-mips.org> Cc: <linuxppc-dev@lists.ozlabs.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NTony Luck <tony.luck@intel.com> Acked-by: NRichard Kuo <rkuo@codeaurora.org> Link: http://lkml.kernel.org/r/1359972583-17134-1-git-send-email-james.hogan@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 04 2月, 2013 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 1月, 2013 28 次提交
-
-
由 Laurent Pinchart 提交于
All boards use sh_pfc_register() directly, remove the unused sh_pfc_register_info() function. Make the name argument to sh_pfc_register() mandatory as it's now supplied by all callers. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Pinmux info for the sh machines is now provided by pinmux drivers. Remove the duplicate copy in arch code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add arch code to register the PFC platform device instead of calling the driver directly. Platform device registration in the sh-pfc driver will be removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The sh_pfc_register() function can be called by boards or SoC setup code to register the PFC platform device. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
A careless look at the code shows that the last entry in the pinmux_gpios seems to be GPIO_FN_IRQOUT. However, entries are ordered by the GPIO number, as the PINMUX_GPIO macro is expended to an indexed array initializer. The last entry in the array is thus GPIO_FN_STATUS0. Set the pinmux_info last_gpio field accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
A careless look at the code shows that the last entry in the pinmux_gpios seems to be GPIO_FN_FSE. However, entries are ordered by the GPIO number, as the PINMUX_GPIO macro is expended to an indexed array initializer. The last entry in the array is thus GPIO_FN_IRL4. Set the pinmux_info last_gpio field accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-