- 23 10月, 2010 2 次提交
-
-
由 Thomas Gleixner 提交于
probe_br_irqs_gsi() is called right after ioapic_init_mappings() and there are no other users. Move it into ioapic_init_mappings() so the declaration can disappear and the function can become static. Rename ioapic_init_mappings() to ioapic_and_gsi_init() to reflect that change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <1287510389-8388-2-git-send-email-dirk.brandewie@gmail.com> Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
-
由 Thomas Gleixner 提交于
Some embedded x86 platforms don't setup the APIC in the BIOS/bootloader and would be forced to add "lapic" on the kernel command line. That's a bit akward. Split out the force enable code from detect_init_APIC() and allow platform code to call it from the platform setup. That avoids the command line parameter and possible replication of the MSR dance in the force enable code. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <1287510389-8388-1-git-send-email-dirk.brandewie@gmail.com> Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
-
- 20 10月, 2010 2 次提交
-
-
由 Robert Richter 提交于
We want the BIOS to setup the EILVT APIC registers. The offsets were hardcoded and BIOS settings were overwritten by the OS. Now, the subsystems for MCE threshold and IBS determine the LVT offset from the registers the BIOS has setup. If the BIOS setup is buggy on a family 10h system, a workaround enables IBS. If the OS determines an invalid register setup, a "[Firmware Bug]: " error message is reported. We need this change also for upcomming cpu families. Signed-off-by: NRobert Richter <robert.richter@amd.com> LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
This patch implements checks for the availability of LVT entries (APIC500-530) and reserves it if used. The check becomes necessary since we want to let the BIOS provide the LVT offsets. The offsets should be determined by the subsystems using it like those for MCE threshold or IBS. On K8 only offset 0 (APIC500) and MCE interrupts are supported. Beginning with family 10h at least 4 offsets are available. Since offsets must be consistent for all cores, we keep track of the LVT offsets in software and reserve the offset for the same vector also to be used on other cores. An offset is freed by setting the entry to APIC_EILVT_MASKED. If the BIOS is right, there should be no conflicts. Otherwise a "[Firmware Bug]: ..." error message is generated. However, if software does not properly determines the offsets, it is not necessarily a BIOS bug. Signed-off-by: NRobert Richter <robert.richter@amd.com> LKML-Reference: <1286360874-1471-2-git-send-email-robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 10月, 2010 4 次提交
-
-
由 Yinghai Lu 提交于
On a system that support intr-rempping when booting with "intremap=off" [ 177.895501] BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8 [ 177.913316] IP: [<ffffffff8145fc18>] free_irte+0x47/0xc0 ... [ 178.173326] Call Trace: [ 178.173574] [<ffffffff810515b4>] destroy_irq+0x3a/0x75 [ 178.192934] [<ffffffff81051834>] arch_teardown_msi_irq+0xe/0x10 [ 178.193418] [<ffffffff81458dc3>] arch_teardown_msi_irqs+0x56/0x7f [ 178.213021] [<ffffffff81458e79>] free_msi_irqs+0x8d/0xeb Call free_irte only when interrupt remapping is enabled. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4CBCB274.7010108@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Venkatesh Pallipadi 提交于
This patch adds IRQ_TIME_ACCOUNTING option on x86 and runtime enables it when TSC is enabled. This change just enables fine grained irq time accounting, isn't used yet. Following patches use it for different purposes. Signed-off-by: NVenkatesh Pallipadi <venki@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1286237003-12406-6-git-send-email-venki@google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> [ various fixes ] Signed-off-by: NHuang Ying <ying.huang@intel.com> LKML-Reference: <1287036094.7768.291.camel@yhuang-dev> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
PERF_COUNT_HW_CACHE_DTLB:READ:MISS had a bogus umask value of 0 which counts nothing. Needed to be 0x7 (to count all possibilities). PERF_COUNT_HW_CACHE_ITLB:READ:MISS had a bogus umask value of 0 which counts nothing. Needed to be 0x3 (to count all possibilities). Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: <stable@kernel.org> # as far back as it applies LKML-Reference: <4cb85478.41e9d80a.44e2.3f00@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 10月, 2010 2 次提交
-
-
由 Thomas Gleixner 提交于
This file is unused since the apic unification in 2.6.29, but nobody noticed. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Len Brown <lenb@kernel.org>
-
- 14 10月, 2010 3 次提交
-
-
由 Jeremy Fitzhardinge 提交于
head_64.S maps up to 512 MiB, but that is not necessarity true for other entry paths, such as Xen. Thus, co-locate the setting of max_pfn_mapped with the code to actually set up the page tables in head_64.S. The 32-bit code is already so co-located. (The Xen code already sets max_pfn_mapped correctly for its own use case.) -v2: Yinghai fixed the following bug in this patch: | | max_pfn_mapped is in .bss section, so we need to set that | after bss get cleared. Without that we crash on bootup. | | That is safe because Xen does not call x86_64_start_kernel(). | Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Fixed-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4CB6AB24.9020504@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Masami Hiramatsu 提交于
Use __stop_machine() in text_poke_smp() because the caller must get online_cpus before calling text_poke_smp(), but stop_machine() do it again. We don't need it. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20101014031036.4100.83989.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Daniel Drake 提交于
The upcoming XO-1 rfkill driver (for drivers/platform/x86) will register itself with the name "xo1-rfkill", and the already-merged XO-1 poweroff code uses name "olpc-xo1" Add the necessary mechanics so that these devices are properly initialized on XO-1 laptops. Signed-off-by: NDaniel Drake <dsd@laptop.org> LKML-Reference: <20101013181042.90C8F9D401B@zog.reactivated.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 13 10月, 2010 3 次提交
-
-
由 Joerg Roedel 提交于
This patch updates the copyright headers in all source files of the AMD IOMMU driver. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Matthew Garrett 提交于
AMD's reference BIOS code had a bug that could result in the firmware failing to reenable the iommu on resume. It transpires that this causes certain less than desirable behaviour when it comes to PCI accesses, to whit them ending up somewhere near Bristol when the more desirable outcome was Edinburgh. Sadness ensues, perhaps along with filesystem corruption. Let's make sure that it gets turned back on, and that we restore its configuration so decisions it makes bear some resemblance to those made by reasonable people rather than crack-addled lemurs who spent all your DMA on Thunderbird. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Daniel Drake 提交于
Add a pm_power_off handler for the OLPC XO-1 laptop. The driver can be built modular and follows the behaviour of the APM driver, setting pm_power_off to NULL on unload. However, the ability to unload the module will probably be removed (with a simple __module_get(THIS_MODULE)) if/when XO-1 suspend/resume support is added to this file at a later date. Signed-off-by: NDaniel Drake <dsd@laptop.org> LKML-Reference: <20101010094032.9AE669D401B@zog.reactivated.net> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 12 10月, 2010 24 次提交
-
-
由 Thomas Gleixner 提交于
No callers from atomic context (except boot) anymore. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Instead of looping through all interrupts, use the bitmap lookup to find the next. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
No users outside of io_apic.c Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
irq_2_iommu is in struct irq_cfg, so we can do the irq_remapped check based on irq_cfg instead of going through a lookup function. That's especially interesting in the eoi_ioapic_irq() hotpath. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Switch over to the new allocator and remove all the magic which was caused by the unability to destroy irq descriptors. Get rid of the create_irq_nr() loop for sparse and non sparse irq. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
The sparseirq rework triggered a warning in the iommu code, which was caused by setting up ioapic for ACPI irq 9 twice. This function is solely to handle interrupts which are on a secondary ioapic and outside the legacy irq range. Replace the sparse irq_to_desc check with a non ifdeffed version. [ tglx: Moved it before the ioapic sparse conversion and simplified the inverse logic ] Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB00122.3030301@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Rename the grossly misnamed get_one_free_irq_cfg() to alloc_irq_cfg(). Add a (not yet used) irq number argument to free_irq_cfg() Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Implement new allocator functions which make use of the core changes. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Cleanup after the irq_chip conversion a bit. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
While at it rename it to sensible function names and fix the return value from unsigned to int for __ioapic_set_affinity (set_desc_affinity). Returning -1 in a function returning unsigned int is somewhat strange. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Most of it is useless pseudo optimization. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-