- 14 11月, 2005 3 次提交
-
-
由 Rohit Seth 提交于
Clean up of __alloc_pages. Restoration of previous behaviour, plus further cleanups by introducing an 'alloc_flags', removing the last of should_reclaim_zone. Signed-off-by: NRohit Seth <rohit.seth@intel.com> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robin Holt 提交于
The address based work estimate for unmapping (for lockbreak) is and always was horribly inefficient for sparse mappings. The problem is most simply explained with an example: If we find a pgd is clear, we still have to call into unmap_page_range PGDIR_SIZE / ZAP_BLOCK_SIZE times, each time checking the clear pgd, in order to progress the working address to the next pgd. The fundamental way to solve the problem is to keep track of the end address we've processed and pass it back to the higher layers. From: Nick Piggin <npiggin@suse.de> Modification to completely get away from address based work estimate and instead use an abstract count, with a very small cost for empty entries as opposed to present pages. On 2.6.14-git2, ppc64, and CONFIG_PREEMPT=y, mapping and unmapping 1TB of virtual address space takes 1.69s; with the following patch applied, this operation can be done 1000 times in less than 0.01s From: Andrew Morton <akpm@osdl.org> With CONFIG_HUTETLB_PAGE=n: mm/memory.c: In function `unmap_vmas': mm/memory.c:779: warning: division by zero Due to zap_work -= (end - start) / (HPAGE_SIZE / PAGE_SIZE); So make the dummy HPAGE_SIZE non-zero Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kirill Korotaev 提交于
In __alloc_pages(): if ((p->flags & (PF_MEMALLOC | PF_MEMDIE)) && !in_interrupt()) { /* go through the zonelist yet again, ignoring mins */ for (i = 0; zones[i] != NULL; i++) { struct zone *z = zones[i]; page = buffered_rmqueue(z, order, gfp_mask); if (page) { zone_statistics(zonelist, z); goto got_pg; } } goto nopage; <<<< HERE!!! FAIL... } kswapd (which has PF_MEMALLOC flag) can fail to allocate memory even when it allocates it with __GFP_NOFAIL flag. Signed-Off-By: NPavel Emelianov <xemul@sw.ru> Signed-Off-By: NDenis Lunev <den@sw.ru> Signed-Off-By: NKirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 1 次提交
-
-
由 Dave Jones 提交于
I just hit a page allocation error on a kernel configured to support 64 CPUs. It spewed 60 completely useless unnecessary lines of info. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 11月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
-
- 07 11月, 2005 15 次提交
-
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
I didn't find any possible modular usage in the kernel. This patch was already ACK'ed by Christoph Hellwig. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc errors in vmalloc.c. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Various core kernel-doc cleanups: - add missing function parameters in ipc, irq/manage, kernel/sys, kernel/sysctl, and mm/slab; - move description to just above function for kernel_restart() Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Add a few comments surrounding the generic readahead API. Also convert some ulongs into pgoff_t: the identifier for PAGE_CACHE_SIZE offsets into pagecache. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manfred Spraul 提交于
Chen noticed that cache_reap uses REAPTIMEOUT_CPUC+smp_processor_id() as the timeout for rescheduling. The "+smp_processor_id()" part is wrong, the timeout should be identical for all cpus: start_cpu_timer already adds a cpu dependant offset to avoid any clustering. The attached patch removes smp_processor_id(). Signed-Off-By: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka J Enberg 提交于
This patch renames struct kmem_cache_s to kmem_cache so we can start using it instead of kmem_cache_t typedef. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
slab presently goes BUG if someone tries to register an already-registered cache. But this can happen if the user accidentally loads a module which is already statically linked into the kernel. Nuking the kernel is rather a harsh reaction. Change it into a warning, and just fail the kmem_cache_alloc() attempt. If the module is well-behaved, the modprobe will fail and all is well. Notes: - Swaps the ranking of cache_chain_sem and lock_cpu_hotplug(). Doesn't seem important. Acked-by: NManfred Spraul <manfred@colorfullife.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Suppress split ptlock on arches which may use one page for multiple page tables. Reconsider what better to do (particularly on ppc64) later on. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 11月, 2005 1 次提交
-
-
由 Steve French 提交于
These are needed to implement cifs_writepages Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 31 10月, 2005 7 次提交
-
-
由 Matt Mackall 提交于
From: Hareesh Nagarajan <hnagar2@gmail.com> Signed-off-by: NHareesh Nagarajan <hnagar2@gmail.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
This patch is a rewrite of the one submitted on October 1st, using modules (http://marc.theaimsgroup.com/?l=linux-kernel&m=112819093522998&w=2). This rewrite adds a tristate CONFIG_RCU_TORTURE_TEST, which enables an intense torture test of the RCU infratructure. This is needed due to the continued changes to the RCU infrastructure to accommodate dynamic ticks, CPU hotplug, realtime, and so on. Most of the code is in a separate file that is compiled only if the CONFIG variable is set. Documentation on how to run the test and interpret the output is also included. This code has been tested on i386 and ppc64, and an earlier version of the code has received extensive testing on a number of architectures as part of the PREEMPT_RT patchset. Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tejun Heo 提交于
This patch removes redundant assignment from __pagevec_release_nonlru(). pages_to_free.cold is set to pvec->cold by pagevec_init() call right above the assignment. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tejun Heo 提交于
When __generic_file_aio_read() hits an error during reading, it reports the error iff nothing has successfully been read yet. This is condition - when an error occurs, if nothing has been read/written, report the error code; otherwise, report the amount of bytes successfully transferred upto that point. This corner case can be exposed by performing readv(2) with the following iov. iov[0] = len0 @ ptr0 iov[1] = len1 @ NULL (or any other invalid pointer) iov[2] = len2 @ ptr2 When file size is enough, performing above readv(2) results in len0 bytes from file_pos @ ptr0 len2 bytes from file_pos + len0 @ ptr2 And the return value is len0 + len2. Test program is attached to this mail. This patch makes __generic_file_aio_read()'s error handling identical to other functions. #include <stdio.h> #include <stdlib.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <sys/uio.h> #include <errno.h> #include <string.h> int main(int argc, char **argv) { const char *path; struct stat stbuf; size_t len0, len1; void *buf0, *buf1; struct iovec iov[3]; int fd, i; ssize_t ret; if (argc < 2) { fprintf(stderr, "Usage: testreadv path (better be a " "small text file)\n"); return 1; } path = argv[1]; if (stat(path, &stbuf) < 0) { perror("stat"); return 1; } len0 = stbuf.st_size / 2; len1 = stbuf.st_size - len0; if (!len0 || !len1) { fprintf(stderr, "Dude, file is too small\n"); return 1; } if ((fd = open(path, O_RDONLY)) < 0) { perror("open"); return 1; } if (!(buf0 = malloc(len0)) || !(buf1 = malloc(len1))) { perror("malloc"); return 1; } memset(buf0, 0, len0); memset(buf1, 0, len1); iov[0].iov_base = buf0; iov[0].iov_len = len0; iov[1].iov_base = NULL; iov[1].iov_len = len1; iov[2].iov_base = buf1; iov[2].iov_len = len1; printf("vector "); for (i = 0; i < 3; i++) printf("%p:%zu ", iov[i].iov_base, iov[i].iov_len); printf("\n"); ret = readv(fd, iov, 3); if (ret < 0) perror("readv"); printf("readv returned %zd\nbuf0 = [%s]\nbuf1 = [%s]\n", ret, (char *)buf0, (char *)buf1); return 0; } Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
This patch automatically updates a tasks NUMA mempolicy when its cpuset memory placement changes. It does so within the context of the task, without any need to support low level external mempolicy manipulation. If a system is not using cpusets, or if running on a system with just the root (all-encompassing) cpuset, then this remap is a no-op. Only when a task is moved between cpusets, or a cpusets memory placement is changed does the following apply. Otherwise, the main routine below, rebind_policy() is not even called. When mixing cpusets, scheduler affinity, and NUMA mempolicies, the essential role of cpusets is to place jobs (several related tasks) on a set of CPUs and Memory Nodes, the essential role of sched_setaffinity is to manage a jobs processor placement within its allowed cpuset, and the essential role of NUMA mempolicy (mbind, set_mempolicy) is to manage a jobs memory placement within its allowed cpuset. However, CPU affinity and NUMA memory placement are managed within the kernel using absolute system wide numbering, not cpuset relative numbering. This is ok until a job is migrated to a different cpuset, or what's the same, a jobs cpuset is moved to different CPUs and Memory Nodes. Then the CPU affinity and NUMA memory placement of the tasks in the job need to be updated, to preserve their cpuset-relative position. This can be done for CPU affinity using sched_setaffinity() from user code, as one task can modify anothers CPU affinity. This cannot be done from an external task for NUMA memory placement, as that can only be modified in the context of the task using it. However, it easy enough to remap a tasks NUMA mempolicy automatically when a task is migrated, using the existing cpuset mechanism to trigger a refresh of a tasks memory placement after its cpuset has changed. All that is needed is the old and new nodemask, and notice to the task that it needs to rebind its mempolicy. The tasks mems_allowed has the old mask, the tasks cpuset has the new mask, and the existing cpuset_update_current_mems_allowed() mechanism provides the notice. The bitmap/cpumask/nodemask remap operators provide the cpuset relative calculations. This patch leaves open a couple of issues: 1) Updating vma and shmfs/tmpfs/hugetlbfs memory policies: These mempolicies may reference nodes outside of those allowed to the current task by its cpuset. Tasks are migrated as part of jobs, which reside on what might be several cpusets in a subtree. When such a job is migrated, all NUMA memory policy references to nodes within that cpuset subtree should be translated, and references to any nodes outside that subtree should be left untouched. A future patch will provide the cpuset mechanism needed to mark such subtrees. With that patch, we will be able to correctly migrate these other memory policies across a job migration. 2) Updating cpuset, affinity and memory policies in user space: This is harder. Any placement state stored in user space using system-wide numbering will be invalidated across a migration. More work will be required to provide user code with a migration-safe means to manage its cpuset relative placement, while preserving the current API's that pass system wide numbers, not cpuset relative numbers across the kernel-user boundary. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
This patch keeps pdflush daemons on the same cpuset as their parent, the kthread daemon. Some large NUMA configurations put as much as they can of kernel threads and other classic Unix load in what's called a bootcpuset, keeping the rest of the system free for dedicated jobs. This effort is thwarted by pdflush, which dynamically destroys and recreates pdflush daemons depending on load. It's easy enough to force the originally created pdflush deamons into the bootcpuset, at system boottime. But the pdflush threads created later were allowed to run freely across the system, due to the necessary line in their startup kthread(): set_cpus_allowed(current, CPU_MASK_ALL); By simply coding pdflush to start its threads with the cpus_allowed restrictions of its cpuset (inherited from kthread, its parent) we can ensure that dynamically created pdflush threads are also kept in the bootcpuset. On systems w/o cpusets, or w/o a bootcpuset implementation, the following will have no affect, leaving pdflush to run on any CPU, as before. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Kara 提交于
Fix the problem (BUG 4964) with unmapped buffers in transaction's t_sync_data list. The problem is we need to call filesystem's own invalidatepage() from block_write_full_page(). block_write_full_page() must call filesystem's invalidatepage(). Otherwise following nasty race can happen: proc 1 proc 2 ------ ------ - write some new data to 'offset' => bh gets to the transactions data list - starts truncate => i_size set to new size - mpage_writepages() - ext3_ordered_writepage() to 'offset' - block_write_full_page() - page->index > end_index+1 - block_invalidatepage() - discard_buffer() - clear_buffer_mapped() - commit triggers and finds unmapped buffer - BOOM! Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 12 次提交
-
-
由 Nikita Danilov 提交于
move EXPORT_SYMBOL(filemap_populate) to the proper place: just after function itself: it's easy to miss that function is exported otherwise. Signed-off-by: NNikita Danilov <nikita@clusterfs.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 John Hawkes 提交于
In 'mm' change the explicit use of a for-loop using NR_CPUS into the general for_each_cpu() constructs. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(), which is advantageous when the true CPU count is much smaller than NR_CPUS. Signed-off-by: NJohn Hawkes <hawkes@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Policy contextualization is only useful for task based policies and not for vma based policies. It may be useful to define allowed nodes that are not accessible from this thread because other threads may have access to these nodes. Without this patch strange memory policy situations may cause an application to fail with out of memory. Example: Let's say we have two threads A and B that share the same address space and a huge array computational array X. Thread A is restricted by its cpuset to nodes 0 and 1 and thread B is restricted by its cpuset to nodes 2 and 3. Thread A now wants to restrict allocations to the first node and thus applies a BIND policy on X to node 0 and 2. The cpuset limits this to node 0. Thus pages for X must be allocated on node 0 now. Thread B now touches a page that has never been used in X and faults in a page. According to the BIND policy of the vma for X the page must be allocated on page 0. However, the cpuset of B does not allow allocation on 0 and 1. Now the application fails in alloc_pages with out of memory. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
- Do a separation between do_xxx and sys_xxx functions. sys_xxx functions take variable sized bitmaps from user space as arguments. do_xxx functions take fixed sized nodemask_t as arguments and may be used from inside the kernel. Doing so simplifies the initialization code. There is no fs = kernel_ds assumption anymore. - Split up get_nodes into get_nodes (which gets the node list) and contextualize_policy which restricts the nodes to those accessible to the task and updates cpusets. - Add comments explaining limitations of bind policy Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
From: IWAMOTO Toshihiro <iwamoto@valinux.co.jp> > I found the tests does not work well with Dave's patchset. > I've found the followings: > > - setup_per_zone_pages_min() calls should be added in > capture_page_range() and online_pages() > - lru_add_drain() should be called before try_to_migrate_pages() The following patch deals with the first item. Signed-off-by: NIWAMOTO Toshihiro <iwamoto@valinux.co.jp> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
This basically keeps up from having to extern __kmalloc_section_memmap(). The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that header gets hard to work with, because it needs some arch-specific macros. Just stick it in here for now, instead of creating another header. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NLion Vollnhals <webmaster@schiggl.de> Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz> Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
This adds generic memory add/remove and supporting functions for memory hotplug into a new file as well as a memory hotplug kernel config option. Individual architecture patches will follow. For now, disable memory hotplug when swsusp is enabled. There's a lot of churn there right now. We'll fix it up properly once it calms down. Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
See the "fixup bad_range()" patch for more information, but this actually creates a the lock to protect things making assumptions about a zone's size staying constant at runtime. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
pgdat->node_size_lock is basically only neeeded in one place in the normal code: show_mem(), which is the arch-specific sysrq-m printing function. Strictly speaking, the architectures not doing memory hotplug do no need this locking in show_mem(). However, they are all included for completeness. This should also make any future consolidation of all of the implementations a little more straightforward. This lock is also held in the sparsemem code during a memory removal, as sections are invalidated. This is the place there pfn_valid() is made false for a memory area that's being removed. The lock is only required when doing pfn_valid() operations on memory which the user does not already have a reference on the page, such as in show_mem(). Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
When doing memory hotplug operations, the size of existing zones can obviously change. This means that zone->zone_{start_pfn,spanned_pages} can change. There are currently no locks that protect these structure members. However, they are rarely accessed at runtime. Outside of swsusp, the only place that I can find is bad_range(). So, split bad_range() up into two pieces: one that needs to be locked and anther that doesn't. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
A little helper that we use in the hotplug code. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
If a zone is empty at boot-time and then hot-added to later, it needs to run the same init code that would have been run on it at boot. This patch breaks out zone table and per-cpu-pages functions for use by the hotplug code. You can almost see all of the free_area_init_core() function on one page now. :) Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-