- 29 5月, 2014 34 次提交
-
-
由 Weston Andros Adamson 提交于
Since the ability to split pages into subpage requests has been added, nfs_pgio_header->rpc_list only ever has one pgio data. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Use the newly added support for multiple requests per page for rsize/wsize < PAGE_SIZE, instead of having multiple read / write data structures per pageio header. This allows us to get rid of nfs_pgio_multi. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Now that pg_test can change the size of the request (by returning a non-zero size smaller than the request), pg_test functions that call other pg_test functions must return the minimum of the result - or 0 if any fail. Also clean up the logic of some pg_test functions so that all checks are for contitions where coalescing is not possible. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Remove check that the request covers a whole page. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Remove unneeded else statement and clean up how commit info dataserver buckets are replaced. Suggested-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Change how nfs_mark_uptodate checks to see if writes cover a whole page. This patch should have no effect yet since all page groups currently have one request, but will come into play when pg_test functions are modified to split pages into sub-page regions. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Operations that modify state for a whole page must be syncronized across all requests within a page group. In the write path, this is calling end_page_writeback and removing the head request from an inode. Both of these operations should not be called until all requests in a page group have reached the point where they would call them. This patch should have no effect yet since all page groups currently have one request, but will come into play when pg_test functions are modified to split pages into sub-page regions. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Operations that modify state for a whole page must be syncronized across all requests within a page group. In the read path, this is calling unlock_page and SetPageUptodate. Both of these functions should not be called until all requests in a page group have reached the point where they would call them. This patch should have no effect yet since all page groups currently have one request, but will come into play when pg_test functions are modified to split pages into sub-page regions. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Add "page groups" - a circular list of nfs requests (struct nfs_page) that all reference the same page. This gives nfs read and write paths the ability to account for sub-page regions independently. This somewhat follows the design of struct buffer_head's sub-page accounting. Only "head" requests are ever added/removed from the inode list in the buffered write path. "head" and "sub" requests are treated the same through the read path and the rest of the write/commit path. Requests are given an extra reference across the life of the list. Page groups are never rejoined after being split. If the read/write request fails and the client falls back to another path (ie revert to MDS in PNFS case), the already split requests are pushed through the recoalescing code again, which may split them further and then coalesce them into properly sized requests on the wire. Fragmentation shouldn't be a problem with the current design, because we flush all requests in page group when a non-contiguous request is added, so the only time resplitting should occur is on a resend of a read or write. This patch lays the groundwork for sub-page splitting, but does not actually do any splitting. For now all page groups have one request as pg_test functions don't yet split pages. There are several related patches that are needed support multiple requests per page group. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Call nfs_can_coalesce_requests for every request, even the first one. This is needed for future patches to give pg_test a way to inform add_request to reduce the size of the request. Now @prev can be null in nfs_can_coalesce_requests and pg_test functions. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
This is a step toward allowing pg_test to inform the the coalescing code to reduce the size of requests so they may fit in whatever scheme the pg_test callback wants to define. For now, just return the size of the request if there is space, or 0 if there is not. This shouldn't change any behavior as it acts the same as when the pg_test functions returned bool. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
@inode is passed but not used. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Remove unused flags PG_NEED_COMMIT and PG_NEED_RESCHED. Add comments describing how each flag is used. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Hold the lock while modifying commit info dataserver buckets. The following oops can be reproduced by running iozone for a while against a 2 DS pynfs filelayout server. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 nfs fscache CPU: 0 PID: 903 Comm: iozone Not tainted 3.15.0-rc1-branch-dros_testing+ #44 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference task: ffff880078164480 ti: ffff88006e972000 task.ti: ffff88006e972000 RIP: 0010:[<ffffffffa01936e1>] [<ffffffffa01936e1>] nfs_init_commit+0x22/0x RSP: 0018:ffff88006e973d30 EFLAGS: 00010246 RAX: ffff88006e973e00 RBX: ffff88006e828800 RCX: ffff88006e973e10 RDX: 0000000000000000 RSI: ffff88006e973e00 RDI: dead4ead00000000 RBP: ffff88006e973d38 R08: ffff88006e8289d8 R09: 0000000000000000 R10: ffff88006e8289d8 R11: 0000000000016988 R12: ffff88006e973b98 R13: ffff88007a0a6648 R14: ffff88006e973e10 R15: ffff88006e828800 FS: 00007f2ce396b740(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f03278a1000 CR3: 0000000079043000 CR4: 00000000001407f0 Stack: ffff88006e8289d8 ffff88006e973da8 ffffffffa00f144f ffff88006e9478c0 ffff88006e973e00 ffff88006de21080 0000000100000002 ffff880079be6c48 ffff88006e973d70 ffff88006e973d70 ffff88006e973e10 ffff88006de21080 Call Trace: [<ffffffffa00f144f>] filelayout_commit_pagelist+0x1ae/0x34a [nfs_layout_nfsv [<ffffffffa0194f72>] nfs_generic_commit_list+0x92/0xc4 [nfs] [<ffffffffa0195053>] nfs_commit_inode+0xaf/0x114 [nfs] [<ffffffffa01892bd>] nfs_file_fsync_commit+0x82/0xbe [nfs] [<ffffffffa01ceb0d>] nfs4_file_fsync+0x59/0x9b [nfsv4] [<ffffffff8114ee3c>] vfs_fsync_range+0x18/0x20 [<ffffffff8114ee60>] vfs_fsync+0x1c/0x1e [<ffffffffa01891c2>] nfs_file_flush+0x7f/0x84 [nfs] [<ffffffff81127a43>] filp_close+0x3c/0x72 [<ffffffff81140e12>] __close_fd+0x82/0x9a [<ffffffff81127a9c>] SyS_close+0x23/0x4c [<ffffffff814acd12>] system_call_fastpath+0x16/0x1b Code: 5b 41 5c 41 5d 41 5e 5d c3 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8 RIP [<ffffffffa01936e1>] nfs_init_commit+0x22/0xe1 [nfs] RSP <ffff88006e973d30> ---[ end trace 732fe6419b235e2f ]--- Suggested-by: NTrond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
At this point the read and write structures look identical, so combine them into something shared by both. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
What we have here is two functions that look identical. Let's share some more code! Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Once again, these two functions look identical in the read and write case. Time to combine them together! Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Most of this code is the same for both the read and write paths, so combine everything and use the rw_ops when necessary. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are almost identical on both the read and write side. FLUSH_COND_STABLE will never be set for the read path, so leaving it in the generic code won't hurt anything. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
At this point, the read and write versions of this function look identical so both should use the same function. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Write adds a little bit of code dealing with flush flags, but since "how" will always be 0 when reading we can share the code. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The read and write paths set up this struct in exactly the same way, so create a single shared struct. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Combining these functions will let me make a single nfs_rw_common_ops struct (see the next patch). Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The read and write paths do exactly the same thing for the rpc_prepare rpc_op. This patch combines them together into a single function. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
I create a new struct nfs_rw_ops to decide the differences between reads and writes. This struct will be set when initializing a new nfs_pgio_descriptor, and then passed on to the nfs_rw_header when a new header is allocated. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are identical for the read and write paths so they can be combined. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The header had a pointer to the verifier that was set from the old write data struct. We don't need to keep the pointer around now that we have shared structures. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The only difference is the write verifier field, but we can keep that for a little bit longer. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
At this point, the only difference between nfs_read_data and nfs_write_data is the write verifier. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Reads and writes have very similar results. This patch combines the two structs together with comments to show where the differing fields are used. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
Reads and writes have very similar arguments. This patch combines them together and documents the few fields used only by write. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The read_pageio_init method is just a very convoluted way to grab the right nfs_pageio_ops vector. The vector to chose is not a choice of protocol version, but just a pNFS vs MDS I/O choice that can simply be done inside nfs_pageio_init_read based on the presence of a layout driver, and a new force_mds flag to the special case of falling back to MDS I/O on a pNFS-capable volume. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The write_pageio_init method is just a very convoluted way to grab the right nfs_pageio_ops vector. The vector to chose is not a choice of protocol version, but just a pNFS vs MDS I/O choice that can simply be done inside nfs_pageio_init_write based on the presence of a layout driver, and a new force_mds flag to the special case of falling back to MDS I/O on a pNFS-capable volume. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
"fdatasync() is similar to fsync(), but does not flush modified metadata unless that metadata is needed in order to allow a subsequent data retrieval to be correctly handled." We absolutely need to commit the layouts to be able to retrieve the data in case either the client, the server or the storage subsystem go down. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 19 5月, 2014 1 次提交
-
-
由 Trond Myklebust 提交于
We're not taking a reference in the case where _gss_mech_get_by_pseudoflavor loops without finding the correct rpcsec_gss flavour, so why are we releasing it? Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 16 4月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
If we suspect that the server may have cleared the suid/sgid bit, then mark the inode for revalidation. Reported-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Fix a bug, whereby nfs_update_inode() was declaring the inode to be up to date despite not having checked all the attributes. The bug occurs because the temporary variable in which we cache the validity information is 'sanitised' before reapplying to nfsi->cache_validity. Reported-by: NKinglong Mee <kinglongmee@gmail.com> Cc: stable@vger.kernel.org # 3.5+ Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 15 4月, 2014 1 次提交
-
-
由 Kinglong Mee 提交于
When double mounting same nfs filesystem, the devname saved in d_fsdata will be lost.The second mount should not change the devname that be saved in d_fsdata. Signed-off-by: NKinglong Mee <kinglongmee@gmail.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 14 4月, 2014 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Geert Uytterhoeven 提交于
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-